Drills and Hammer Drills
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Drills and Hammer Drills Hackzall Jig Saw Radio Site Light String Trimmer Thread Rod Cutter Tool Storage Wireless Blue Tooth Speaker
Part #:729-2792-20
- M18&trade Jobsite Radio/Charger
The Milwaukee® M18&trade Jobsite Radio/Charger is the first charging radio to bring the power of Bluetooth® to the jobsite, while delivering the industry's best reception and sound. The most advanced radio of its kind, the M18&trade Jobsite Radio/Charger features a Bluetooth® receiver so you can stream rich, full sound wirelessly from over 100 feet away. Its unique battery charger allows you to charge any M18&trade battery without sacrificing reception or sound quality. For added versatility, a high-power USB port allows you to charge most portable electronic devices over 50% faster than any competitor. The M18&trade Radio/Charger's lightweight, high-strength design includes a reinforced roll cage for protection from weather and abusive jobsite conditions. The radio/charger also offers the industry's largest on-board, weather-sealed storage compartment to protect your small belongings and smart phones. A 16" auxiliary input cord and 2 AAA batteries are included.
Qty:
Part #:729-2145-20
- M18&trade RADIUS&trade Compact Site Light
MOST VERSATILE LIGHT ON SITE - The M18&trade RADIUS&trade Compact Site Light is the World&rsquos first high output cordless site light on the market, and has the ability to provide light in task, area, and overhead applications. With 4,400 lumens of TRUEVIEW&trade High Definition output, the M18&trade Radius&trade LED Compact Site Light provides enough light to illuminate large work areas, and can be turned down to as low as 1,000 lumens for working in confined areas. A high impact polycarbonate lens, and IP54 ingress protection allows it to live in the toughest conditions. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.
Qty:
Part #:500250
-
TE 2 Rotary hammer Rotary hammer perf pkg TE 2 #3497789
Compact dual-mode, pistol-grip SDS Plus (TE-C) rotary hammer &ndash for hammer drilling and rotary-only drilling
Weight according EPTA-Procedure 01/20036 lb.
Working modeHammer drilling, Drilling
Hammer drilling diameter range5/32 - 7/8 in
Kit Contains
TE 2 120V Rotary Hammer
TE 2 Tool Case
Chuck Grease
Hammer Drill Bit TE-CX 3/8"x6"
Hammer Drill Bit TE-CX 1/4"x6"
Hammer Drill Bit TE-CX 3/16"x6"
Weight according EPTA-Procedure 01/20036 lb.Working modeHammer drilling, DrillingHammer drilling diameter range5/32 - 7/8 inOptimum Hammer drilling range5/32 - 15/32 inSingle impact energy1.3 ft-lbsHammer drilling RPM1200 rpmFull hammering frequency4600 impacts/minuteFunctionalityReverse mode, Depth gaugeTriaxial vibration value for hammer drilling into concrete (ah,HD)13.5 m/s² 1 A-weighted emission sound pressure level91 dB (A) 2 Dimensions (LxWxH)13.9 x 3.5 x 8 mm
$
417.59
Qty:
Part #:729-2625-20
- M18&trade HACKZALL® Recip Saw (Tool Only)
Our M18&trade HACKZALL® One-Handed Recip Saw features a Dual Gear Anti-Vibration System providing you with unmatched comfort and control. Its compact, lightweight design gives you superior control and versatility. The cordless recip saw's powerful motor gives you 0-3,000 strokes per minute while its 3/4&rdquo stroke length allows you to perform fast cuts through a wide range of material such as wood, metal, and PVC. The dual gear anti-vibration system increases control and accuracy. The HACKZALL® One-Handed Recip Saw also features a QUIK-LOK&trade blade clamp which allows you to perform fast and easy blade changes.
Qty:
Part #:271920
- M18 FUEL&trade Hackzall® (Tool Only)
The Milwaukee 2719-21 M18&trade FUEL&trade HACKZALL® is the fastest cutting and most powerful one-handed reciprocating saw. Utilizing a POWERSTATE&trade Brushless Motor and a best in class 7/8" stroke length, the M18&trade FUEL&trade HACKZALL® cuts up to 50% faster than competitors. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS&trade Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris.
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2825-20ST
- M18 FUEL&trade String Trimmer w/ QUIK-LOK&trade
Designed to meet the needs of landscape maintenance professionals, our M18 FUEL&trade String Trimmer w/ QUIK-LOK&trade provides you with the power to clear thick brush, reaches full throttle in under 1 second, and delivers up to 1 hour of run-time per charge. The cordless string trimmer is made up of two components &ndash the M18 FUEL&trade Power Head w/ QUIK-LOK&trade and QUIK-LOK&trade String Trimmer Attachment. This M18 FUEL&trade Power Head, part of the QUIK-LOK&trade Attachment System, is compatible with multiple attachments such as our Edger, Articulating Hedge Trimmer, and Pole Saw attachment. This gives you the ability to quickly swap out attachments on a single power head, delivering ultimate versatility and a lower cost of ownership. The POWERSTATE&trade Brushless Motor delivers up to 6,200 RPM with up to a 16&rdquo cutting swath, and gives you the power to maintain speed in demanding applications without bogging down. The motor is positioned in the rear of the trimmer to provide the best combination of power, balance, and maneuverability. REDLINK PLUS&trade intelligence gives you maximum performance while protecting from overload, overheating and over discharge. The advanced electronic package also delivers instantaneous throttle response, high and low speeds, and a variable speed trigger giving you ultimate control over the power range. The M18&trade REDLITHIUM&trade HD9.0 Battery (sold separately) gives you best in class performance and run-time in all applications, delivering up to 1 hour of run-time per charge. The Easy Load Trimmer Head provides you with an easy line loading experience and the ability to load up to 25' of trimmer line in under 30 seconds. Our M18 FUEL&trade String Trimmer w/ QUIK-LOK&trade is part of the M18&trade system which is fully compatible with over 175 tools.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Qty:
Part #:289120
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools System Enhancement. Product Level 3 TOL Audio. Product Level 4 TOL Other. AX Item Number 289120. Country of Origin CHN. Harmonized Tariff 8518220000.:
Qty:
Part #:729-2719-21
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Cutting. Product Level 3 TOL Hackzall. Product Level 4 TOL 1 Batt. Product Level 5 TOL FUEL. AX Item Number 271921. Country of Origin VNM. Harmonized Tariff 8467220090.:
Qty:
Qty:
Part #:729-48-22-8250
- Jobsite Cooler
Milwaukee Tool&rsquos jobsite cooler is specifically designed to be durable enough to withstand tough jobsite conditions. The cooler utilizes double insulation and a food-grade leak proof liner to keep ice cold for 24 hours without leaking. Additionally, Milwaukee constructed the cooler with 1680D ballistic material base and heavy duty metal zippers for a longer life. A tape measure clip with a bottle opener provides ultimate versatility. Lastly, Milwaukee implemented a tech pocket and dry storage compartment to make this cooler a versatile jobsite storage solution.
Qty:
Part #:729-2737B-20
- Country of Origin VNM:
Qty:
Part #:295220
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools System Enhancement. Product Level 3 TOL Audio. Product Level 4 TOL Other. Product Level 5 TOL Other. AX Item Number 295220. Country of Origin CHN. Harmonized Tariff 8527925000.:
Qty:
Qty:
Part #:729-2828-20
- Business Unit Outdoor Power Equipment. Product Level 1 OPE M18. Product Level 2 OPE String Trimmers. Product Level 3 OPE 16" Cutting Swath. Product Level 4 OPE Handheld. Product Level 5 OPE Brushless. AX Item Number 282820. Country of Origin MEX. Harmonized Tariff 8467290070.:
Qty:
Part #:729-3000-21
- Country of Origin CHN:
Qty:
Part #:729-3006-20
- Business Unit Outdoor Power Equipment. Product Level 1 OPE M18. Product Level 2 OPE String Trimmers. Product Level 3 OPE 17" Cutting Swath. Product Level 4 OPE Handheld. Product Level 5 OPE Fuel. AX Item Number 300620. Country of Origin MEX. Harmonized Tariff 8467290070.:
Qty:
Part #:729-2545-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Cutting. Product Level 3 TOL Wood Cutting. Product Level 4 TOL Jig Saw. Product Level 5 TOL Blank. AX Item Number 254520. Country of Origin CHN. Harmonized Tariff 8467220070.:
Qty:
Displaying: 1 - 20 of 20 Matching Items