Columbus McKinnon (C-M)
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Columbus McKinnon (C-M) Eklind General Tool Imark/edn Greenlee Textron Jacobs Chuck
$
326.00
Qty:
Part #:510283
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
446.00
Qty:
Part #:800373
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
Qty:
Part #:800375
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,707.91
Qty:
Part #:800374
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,306.00
Qty:
Part #:801791
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
Qty:
Part #:804543
- Tap Wrench for No. 0 to 1/4 In. Taps
The #164 Tap Wrench for No. 0 to 1/4 In. Taps is designed to hold and turntaps&mdashtools that cut threads on the inner surface of a hole or pipe&mdashor other small tools, such as hand reamers and screw extractors.
Length 2-7/8 in.
Qty:
Part #:506847
- Product Description
The #377 Welding Magnet with 50 Lb. Pull eliminates the need for clamps or temporary fasteners.
Features
Holds steel plates at any of five angles
Specifications
Magnetic pull force 50 lb.
Holding angles 30°, 45°, 60°, 75°, 90°
- See more at https//www.generaltools.com/welding-magnet-with-50-lb-pull#sthash.iQYGXUbb.dpuf
Qty:
Part #:802163
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
530.00
Qty:
Part #:801792
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
348.00
Qty:
Part #:801783
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
220.00
Qty:
Part #:502753
- The #300/1 Industrial Precision 6 In. Flexible Steel Rule can make very precise measurements.
Features
Ultra-fine black graduations
Polished stainless steel finish
Pocket clip
Includes
Plastic sleeve
Dimensions
6 x 3-7/8 in.
Qty:
Part #:800387
- Five-blade Screwdriver Set
The #S605 Five-blade Screwdriver Set includes slotted and crosspoint blades.
Qty:
Part #:510965
- Tungsten Carbide Point Scriber/Etching Pen with MagnetThe #88CM Tungsten Carbide Point Scriber/Etching Pen with Magnet can mark and scribe steel, ceramic and glass. The magnet can retrieve small ferrous and steel parts and chips from hard-to-reach places.
Point diameter 1/16 in. (1.6mm)
Qty:
Part #:513801
- Country of Origin US:
Qty:
Part #:512032
- Magnetic Pick Up Tool with Rigid Or Flexible Shaft Extends From 18-inches to 32-Inched, 2lb Pull Capacity Grabber/Retrieving Magnet
Ideal for retrieving steel and iron parts from hard-to-reach and see work areas, the General Tools 384N Flexible Telescoping Magnetic Pick-Up is a great combination tool for retrieving lost items from confined areas. Equipped with a powerful 2 lb. pull Neodymium magnet the shaft can be either rigid or flexible by simply unscrewing the handle and removing the steel shaft. Without the shaft, the pick can easily snake around objects to retrieve lost items. The shaft can extend from 18" (457mm) to 32" (813mm).
Qty:
Part #:807557
- ANGLE-IZER® Contour Gauge, Profile Gauge, Shape Duplicator, 10-Inch
PRECISE SHAPE DUPLICATION- Easily copy any shape or duplicate a profile exactly for woodworking or tile flooring/linoleum installation where you want to replicate the shape of moldings or match cut outs around door casings and pipe
PERFECT PROFILES- 3" (76mm) deep fingers will measure profiles up to 1-1/4" (32mm) precisely record the cross-sectional shape of a surface
EXTRA LENGTH- 10&rdquo gauge is ideal for woodworking, linoleum installation, ceramic tile installation or any job where contour duplication is essential
Qty:
Part #:507204
- Product Description
The #SPC75 4 In. Drive Pin Punches, Eight-piece Set is ideal for removing metal pins from holes in machine shops and motor service bays.
Features
Made of hardened, tempered and heat-treated tool steel
Ground square ends
Knurled finger grips
Qty:
Part #:513802
- Country of Origin US:
$
5.98
Qty:
Part #:808000
- 6 In. Carbon Fiber Digital CaliperThe #146 6 In. Carbon Fiber Digital Caliper can make inside, outside, depth and step measurements in inches or millimeters.
Qty:
Part #:804527
- Drill Bit Gauge, 1/16&rdquo to ½&rdquo By 64ths Fractional Size With Decimal Equivalents, Stainless Steel
The 14 Drill Gauge helps to quickly and conveniently determine the size of a fractional drill bit. The durable, stainless steel gauge measures drill bits from 1/16 in. to ½ in. by 64ths. The sizes are all permanently etched into the gauge and also show the criminal equivalents. The gauge&rsquos size is 6-1/2 x 2-1/2 inches wide.
6-1/2 x 2-1/2 in.Accuracy ±1/64 in
Qty:
Part #:804511
- Product Description
The #818 Scratch Awl is ideal for scribing and layout work, starting screw holes and piercing soft materials.
Blade length 2-3/4 in.
Overall length 6-1/2 in.
Qty:
Part #:804517
- Drill Bit Grinding AttachmentThe #825 Drill Bit Grinding Attachment can hone drill bits to their original sharpness, extending their life and improving drilling accuracy.
Works with 1/8 to 3/4 in., #1 to #30, A to Z, and 3 to 19mm drill bits
Qty:
Part #:800083
- 24 in. Lighted Mechanical PickupThe #70396 24 In. Lighted Mechanical Pickup is ideal for retrieving items from dark or hard-to-reach places.
Qty:
Displaying: 1 - 24 of 83 Matching Items