Felo
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Felo General Tool Ingersol Rand Union Tools
Part #:841-383-2925RB2TI
- Product DetailsCompact size with high power outputPower regulator is fully adjustableContoured handleEasy-to-service
$
4,660.62
Qty:
Part #:841-383-116K
- Air Hammer Kit, Standard Duty, 2 5/8 in Stroke L, 3,500 blows/min, w/5 Chisels
Ingersoll-Rand Air HammersProduct DetailsAccurate and easily controlled tease throttleStandard beehive retainer - allows use of a wide variety of accessoriesModel 772 - Unitized "easy-out" throttle valve assemblyFurnished with two retainers for use with a wide variety of accessoriesIncludes(5) Chisels
Qty:
Part #:510696
- 2145QiMAX 2155QiMAX Series Impact Wrench
The Ingersoll Rand 2145QiMAX 3/4" Impact Wrench delivers incredible performance and industrial-grade durability in an impact wrench. Plus, its efficient air motor reduces air consumption to save you money. Perfect for the most demanding applications, such as truck and bus service, construction and agricultural equipment maintenance, as well as the MRO market.
$
651.52
Qty:
Part #:510697
- The Ingersoll Rand 2155QiMAX 1" Impact Wrench delivers incredible performance and industrial-grade durability in an impact wrench. Plus, its efficient air motor reduces air consumption to save you money. Perfect for the most demanding applications, such as truck and bus service, construction and agricultural equipment maintenance, as well as the MRO market.
$
849.15
Qty:
Part #:804543
- Tap Wrench for No. 0 to 1/4 In. Taps
The #164 Tap Wrench for No. 0 to 1/4 In. Taps is designed to hold and turntaps&mdashtools that cut threads on the inner surface of a hole or pipe&mdashor other small tools, such as hand reamers and screw extractors.
Length 2-7/8 in.
Qty:
Part #:506847
- Product Description
The #377 Welding Magnet with 50 Lb. Pull eliminates the need for clamps or temporary fasteners.
Features
Holds steel plates at any of five angles
Specifications
Magnetic pull force 50 lb.
Holding angles 30°, 45°, 60°, 75°, 90°
- See more at https//www.generaltools.com/welding-magnet-with-50-lb-pull#sthash.iQYGXUbb.dpuf
Qty:
Part #:502753
- The #300/1 Industrial Precision 6 In. Flexible Steel Rule can make very precise measurements.
Features
Ultra-fine black graduations
Polished stainless steel finish
Pocket clip
Includes
Plastic sleeve
Dimensions
6 x 3-7/8 in.
Qty:
Part #:800387
- Five-blade Screwdriver Set
The #S605 Five-blade Screwdriver Set includes slotted and crosspoint blades.
Qty:
Part #:510965
- Tungsten Carbide Point Scriber/Etching Pen with MagnetThe #88CM Tungsten Carbide Point Scriber/Etching Pen with Magnet can mark and scribe steel, ceramic and glass. The magnet can retrieve small ferrous and steel parts and chips from hard-to-reach places.
Point diameter 1/16 in. (1.6mm)
Qty:
Part #:510692
- 231 Series Impact Wrench
The heavy duty 231C impact wrench has the reliability and durability you&rsquove come to expect from the Ingersoll Rand name. The powerful tool provides an even impact and is durable enough to last through the toughest work environments.
Qty:
Part #:841-383-1105MAX-D3
- 1105MAX Series Premium Mini Ratchet Wrench
The 1105MAX Series is our top-of-the-line, premium mini impact wrenches. These air ratchets offer best-in-class power and speed with features like enhanced corrosion resistance and an ultra-comfortable housing.
Increased Access & Reach These mini ratchet wrenches let you get into deep, tight, and hard-to-reach places.
Long-Lasting Comfort The composite housing and handle insulates from the cold and ensures operator comfort even during extended use.
Trusted Durability The 1105MAX Series can withstand harsh environments and repeated drops.
Qty:
Part #:841-383-2235QTIMAX
- Specifications Air Consumption [Nom] 6 CPM Brand INGERSOLL-RAND Control Type Trigger Country of Origin US Cycle Rate [Nom] 1,220 blows per minute Drive Size [Nom] 1/2 in Drive Type Square Free Speed [Nom] 8,500 rpm Handle Type Pistol Hazmat NO Hose Size [Nom] 3/8 in Inlet Size 1/4 in Length [Nom] 7.6 in MPI Catalog YES Noise Level [Max] 88.7 dB Rank Rank_E Retainer Type O-Rings Torque [Max] 1,300 ft lb; 900 ft lb (reverse) Torque [Min] 900 ft lb Wt. 4.7 lb :
Qty:
Part #:841-383-307B
- Ingersoll-Rand 301 Series Die Grinders 0.25 HPProduct DetailsIt can be used with all types of accessories for porting, weld breaking, and smoothing sharp edges, as well as deburring, polishing, and grindingSuperior maneuverabilitySafety lever prevents accidental startsFront exhaust helps keep work surface cleanVersatile and reliableEasy-to-use, integral safety-lock throttle lever prevents accidental start-upSmall and lightweight design provides easy operation greater access to tight spotsStrong aluminum housing withstands tough operating conditionsTool comes with both a 1/4 in and 6mm collets and two wrenchesIncludesTool1/4 in nd 6mm Collets
Qty:
Part #:512032
- Magnetic Pick Up Tool with Rigid Or Flexible Shaft Extends From 18-inches to 32-Inched, 2lb Pull Capacity Grabber/Retrieving Magnet
Ideal for retrieving steel and iron parts from hard-to-reach and see work areas, the General Tools 384N Flexible Telescoping Magnetic Pick-Up is a great combination tool for retrieving lost items from confined areas. Equipped with a powerful 2 lb. pull Neodymium magnet the shaft can be either rigid or flexible by simply unscrewing the handle and removing the steel shaft. Without the shaft, the pick can easily snake around objects to retrieve lost items. The shaft can extend from 18" (457mm) to 32" (813mm).
Qty:
Part #:807557
- ANGLE-IZER® Contour Gauge, Profile Gauge, Shape Duplicator, 10-Inch
PRECISE SHAPE DUPLICATION- Easily copy any shape or duplicate a profile exactly for woodworking or tile flooring/linoleum installation where you want to replicate the shape of moldings or match cut outs around door casings and pipe
PERFECT PROFILES- 3" (76mm) deep fingers will measure profiles up to 1-1/4" (32mm) precisely record the cross-sectional shape of a surface
EXTRA LENGTH- 10&rdquo gauge is ideal for woodworking, linoleum installation, ceramic tile installation or any job where contour duplication is essential
Qty:
Part #:507204
- Product Description
The #SPC75 4 In. Drive Pin Punches, Eight-piece Set is ideal for removing metal pins from holes in machine shops and motor service bays.
Features
Made of hardened, tempered and heat-treated tool steel
Ground square ends
Knurled finger grips
Qty:
Part #:808000
- 6 In. Carbon Fiber Digital CaliperThe #146 6 In. Carbon Fiber Digital Caliper can make inside, outside, depth and step measurements in inches or millimeters.
Qty:
Part #:804527
- Drill Bit Gauge, 1/16&rdquo to ½&rdquo By 64ths Fractional Size With Decimal Equivalents, Stainless Steel
The 14 Drill Gauge helps to quickly and conveniently determine the size of a fractional drill bit. The durable, stainless steel gauge measures drill bits from 1/16 in. to ½ in. by 64ths. The sizes are all permanently etched into the gauge and also show the criminal equivalents. The gauge&rsquos size is 6-1/2 x 2-1/2 inches wide.
6-1/2 x 2-1/2 in.Accuracy ±1/64 in
Qty:
Part #:804511
- Product Description
The #818 Scratch Awl is ideal for scribing and layout work, starting screw holes and piercing soft materials.
Blade length 2-3/4 in.
Overall length 6-1/2 in.
Qty:
Part #:804517
- Drill Bit Grinding AttachmentThe #825 Drill Bit Grinding Attachment can hone drill bits to their original sharpness, extending their life and improving drilling accuracy.
Works with 1/8 to 3/4 in., #1 to #30, A to Z, and 3 to 19mm drill bits
Qty:
Part #:800083
- 24 in. Lighted Mechanical PickupThe #70396 24 In. Lighted Mechanical Pickup is ideal for retrieving items from dark or hard-to-reach places.
Qty:
Part #:800086
- Lighted Tweezer with Smooth Point Tip
The #70401 Lighted Tweezer with Smooth Point Tip is ideal for retrieving items from dark or hard-to-reach places.
Qty:
Part #:812217
- Automatic Center PunchThe #77 Automatic Center Punch can punch, mark, scribe and start drill, nail or screw holes. It is ideal for machinists and automotive repair pros.
Qty:
Part #:814555
- Replacement Point for #78 Heavy-duty Center Punch
Point diameter 0.083 in. (2.1mm)
Qty:
Displaying: 1 - 24 of 69 Matching Items