Flange
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Flange Hilti Sioux Starrett
Part #:511296
-
HIT-Z Anchor rod Anchor rod HIT-Z 5/8" x 9-1/2" #2018448Material, corrosionCarbon steel, zinc-platedWrench/nut size15/16 inDrill bit diameter3/4 inBase materialsConcrete (cracked), Concrete (uncracked)PROFIS SoftwareYesApprovals / Test reportsICC-ES report (concrete)Cleaning proceduresNon CleaningType of fixingPre-fastening, Through-fasteningProduct ClassUltimate
Part #:841-496-38240-T
- Pipe Flange Aligners, 1/2 in - 1 7/16 in, Threaded
Flange Wizard® Pipe Flange AlignersProduct DetailsFeatures slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbsAll models of the Pipe aligner will two-hole (make 2 holes of the flange horizontally level with the ground) and vertically level the face of the flange in one stepAll models come with 360° vials that just "snap" in and out for easy replacementThe aligner inserts easily into pipe, centers snugly against the inside pipe diameter and automatically aligns with the pipe axis
Qty:
Part #:841-672-5980
- Air Engraving Pens, w/45° Carbide Tipped Point, 59" Hose
Qty:
Part #:841-681-36080
- L.S. Starrett Angle MetersProduct DetailsMagnetic base frees hands when used on ferrous surfacesMeasures any angle for pitch or slopeHandy rise, run, angle, and pitch information on back of toolLarge, readable scale for accurate readings from 0-90° in any quadrant
Qty:
Part #:500250
-
TE 2 Rotary hammer Rotary hammer perf pkg TE 2 #3497789
Compact dual-mode, pistol-grip SDS Plus (TE-C) rotary hammer &ndash for hammer drilling and rotary-only drilling
Weight according EPTA-Procedure 01/20036 lb.
Working modeHammer drilling, Drilling
Hammer drilling diameter range5/32 - 7/8 in
Kit Contains
TE 2 120V Rotary Hammer
TE 2 Tool Case
Chuck Grease
Hammer Drill Bit TE-CX 3/8"x6"
Hammer Drill Bit TE-CX 1/4"x6"
Hammer Drill Bit TE-CX 3/16"x6"
Weight according EPTA-Procedure 01/20036 lb.Working modeHammer drilling, DrillingHammer drilling diameter range5/32 - 7/8 inOptimum Hammer drilling range5/32 - 15/32 inSingle impact energy1.3 ft-lbsHammer drilling RPM1200 rpmFull hammering frequency4600 impacts/minuteFunctionalityReverse mode, Depth gaugeTriaxial vibration value for hammer drilling into concrete (ah,HD)13.5 m/s² 1 A-weighted emission sound pressure level91 dB (A) 2 Dimensions (LxWxH)13.9 x 3.5 x 8 mm
$
397.70
Qty:
Part #:509862
-
Adapter TE-Y to TE-C+ #74068
Chuck
Accessory typeChuck
Chuck typeClick chuck
Product informationAllows a TE-C (SDS-plus) chuck to be fitted to a TE-Y (SDS-max) power tool
Accessory typeChuckChuck typeClick chuckProduct informationAllows a TE-C (SDS-plus) chuck to be fitted to a TE-Y (SDS-max) power toolAdditional Accessory InformationAllows a TE-C (SDS-plus) chuck to be fitted to a TE-Y (SDS-max) power tool
$
381.94
Qty:
Part #:510954
-
Setting tool HVU HIS Setting tool Mechanical setting tool HVU HIS 3/8" #45969
$
94.05
Qty:
closeout
Part #:506232
- CLOSEOUTS Only 1 Left!
- Discontinued being replaced by DX 460 2142665
$
1,668.62
Qty:
Part #:508585
- Applications; Drilling anchor, rebar and through holes in concrete and masonry – possible diameter range 4-28 mm, recommended diameter range 10-20 mm. Chiselling in brick and block, corrective chiseling and surface finishing on concrete. Driving anchor screws and concrete screw anchors. Drilling in wood and metal using the optional quick-release chuck and drill bits with smooth shank up to 13 mm diameter.:
$
1,134.06
Qty:
Part #:506706
- Steel angle headAluminum housingErgonomic Composite GripGrade 5 bolt capacity 7/16&rdquo (11 mm)Drive size 3/8&rdquo (10 mm)Maximum torque 50 ft lb (68 Nm)Free speed 185 rpmWeight 2.6 lb (1.2 kg)Length 10.8&rdquo (274 mm)Air inlet size 1/4&rdquo NPTRecommended hose size 3/8&rdquo (10 mm)Air Consumption 3 cfm (85 l/s) avg. &ndash 12 cfm (340 l/s) max.
Qty:
Part #:841-681-52586
- Product DetailsWell proportioned, hardened, properly tempered, and have a knurled grip for ease of handlingSpecial tempering makes head less likely to fracture from hard, off-center blowIncludesRound Wood Box
$
91.12
Qty:
Part #:508634
-
Hand setting tool HST 5/8" #32981 HSD/HST 16-5/8 Setting tool
Manual setting tool for drop-in anchors (HDI-L/HDI/HDI-S/HDV)
$
14.98
Qty:
Part #:508581
- Applications; Cleaning and lubricating Hilti DX powder-actuated tools.:
$
8.50
Qty:
Part #:508632
-
Hand setting tool HST 3/8"#32979 HSD/HST 10-3/8 Setting tool
Manual setting tool for drop-in anchors (HDI-L/HDI/HDI-S/HDV)
$
7.45
Qty:
Part #:508633
-
Hand setting tool HST 1/2" #32980 HSD/HST 12-1/2 Setting tool
Manual setting tool for drop-in anchors (HDI-L/HDI/HDI-S/HDV)
$
11.40
Qty:
closeout
$
55.75
Qty:
$
76.27
Qty:
$
64.33
Qty:
closeout
$
72.25
Qty:
closeout
$
74.40
Qty:
closeout
$
88.50
Qty:
Displaying: 1 - 24 of 60 Matching Items