Flood Light
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Flood Light Jig Saw Orbital Sander Reciprocating Saw Shear
Part #:805472
- M18 FUEL&trade SAWZALL® Reciprocating Saw - 2 Battery XC5.0 Kit
Our M18 FUEL&trade SAWZALL® Recip Saw 2 Battery Kit is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The MILWAUKEE® M18 FUEL&trade SAWZALL® is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE&trade Brushless Motor to provide you with 3,000 SPM and a 1-1/4" stroke length for faster material removal. REDLINK&trade PLUS electronics ensure maximum performance under stress as well as protection from overloading, overheating, and over-discharging. The included M18&trade REDLITHIUM&trade XC5.0 Battery Pack delivers you up to 2.5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries. The M18 FUEL&trade SAWZALL® Recip Saw is designed to perform in the most demanding applications and is our most durable cordless reciprocating saw yet. A wear-resistant blade change, anti-corrosion blade clamp, and metal reinforced battery rails provide longer component life and stand up to the toughest jobsite conditions. The M18 FUEL&trade SAWZALL® Recip Saw is lighter weight than the previous generation and features an adjustable shoe, integrated LED light, and a hanging hook for convenient storage on the job.
Qty:
Part #:805470
- M18 FUEL&trade SAWZALL® Recip Saw - 1 Battery XC5.0 Kit
Our M18 FUEL&trade SAWZALL® Recip Saw 1 Battery Kit is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The MILWAUKEE® M18 FUEL&trade SAWZALL® is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE&trade Brushless Motor to provide you with 3,000 SPM and a 1-1/4" stroke length for faster material removal. REDLINK&trade PLUS electronics ensure
Qty:
Part #:262120
- M18&trade SAWZALL® Reciprocating Saw (Tool Only)
The M18&trade SAWZALL® Reciprocating Saw delivers unmatched durability, speed, and run-time. The all metal gearing and REDLINK&trade Intellgence provide ultimate performance and protection against jobsite conditions. The M18&trade SAWZALL® Reciprocating Saw provides up to 30% faster cutting and 50% more run-time in key applications versus leading competitors. The slim front end design provides improved ergonomics, offering maximum comfort and control.
Qty:
Part #:506312
- 18 Gauge Shear
This new shear comes with a powerful 6.8 amp Milwaukee built motor. The ergonomic tactile grip is designed for more user comfort allowing you to make that straight cut when needed. The new lightweight, heavy-duty magnesium gear-case has been incorporated in the design for superior balance. The variable speed trigger (0-2500SPM) allows for smoother acceleration and performance when needed.
Qty:
Part #:729-2361-20
- M18&trade ROVER&trade Flood Light (Tool-Only)
Powered by M18 batteries, the Milwaukee 2361-20 M18 LED Flood Light provides best in class light output, functionality and durability. Using 8 high quality LEDs, the flood light provides up to 1,300 lumens. A compact and lightweight roll cage design and replaceable, impact resistant lens ensure the light can stand up to the toughest working conditions. The octagonal shape allows the light to be used at multiple angles while the multiple hanging features provide hands free use. The Milwaukee M18 LED Flood Light carries a limited lifetime LED warranty.
Qty:
Part #:729-2635-20
- M18&trade Cordless 18 Gauge Double Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2636-20
- M18&trade 14 Gauge Double Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2637-20
- M18&trade 18 Gauge Single Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2737-21
- M18 FUEL&trade D-Handle Jig Saw Kit (Discontinued, Replaced by 2737-20)
The M18 FUEL D-Handle Jig Saw combines power, blade speed and precision, to deliver quality cuts in a wide variety of materials and applications. Equipped with Milwaukee&rsquos POWERSTATE Brushless Motor and REDLINK PLUS Intelligence, the M18 FUEL D-Handle Jig Saw provides higher blade speed than corded jig saws at 3500 strokes per minute, minimizing chipping or bucking for clean controlled cuts. With the M18 REDLITHIUM XC5.0 battery, the saw is capable of cutting up to 105 linear feet of ¾&rdquo laminated particle board, delivering all-day productivity with less trips to the charger. The M18 FUEL D-Handle Jig Saw features a variable-speed two-finger trigger, toolless blade-change and bevel adjust, and an integrated LED light with on/off blower to maximize cutline visibility.
Qty:
Part #:729-2722-21HD
- Country of Origin CHN:
Qty:
Part #:729-2470-21
- M12&trade Plastic Pipe Shear Kit
Our M12&trade Plastic Pipe Shear Kit with the powerful M12&trade 12-Volt Lithium-Ion battery included can slice through 2 inch schedule 80 PVC in just 3 seconds. The pipe shear kit is compatible with M12&trade lithium-ion batteries, giving you more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact and water and rust resistant. The ultra- sharp M12&trade plastic pipe shear with pierce point makes burr-free cuts, allowing you to cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade for maximum efficiency on repetitive cuts. The MILWAUKEE® plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time provide you with superior versatility and productivity. In addition to the pipe shear, this kit includes one M12&trade REDLITHIUM&trade CP1.5 battery pack, an M12&trade Lithium-Ion battery charger, and a carrying case.
Qty:
Part #:729-6519-30
- Sawzall® Recip Saw (Discontinued, Replaced by 6519-31)
The 6519-30 Sawzall® Recip Saw delivers best in class cut speed, durability and power with 0-3,000 strokes per minute, a 1-1/8&rdquo stroke length and a 12 Amp motor. The gear protecting clutch extends gear and motor life by absorbing high impact forces and a QUIK-LOK® blade clamp offers fast tool-free blade changes. To provide greater user comfort, a counter weighted mechanism reduces vibration for smoother operation and a redesigned front grip area provides best in class ergonomics.
Qty:
Qty:
Part #:729-2822-20
- M18 FUEL&trade SAWZALL® Recip Saw w/ ONE-KEY&trade (Tool-Only)'
Our M18 FUEL&trade SAWZALL® Recip Saw is the next generation of legendary performance and durability, designed for the toughest jobsite applications. The M18 FUEL&trade SAWZALL® is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE&trade Brushless Motor to provide you with 3,000 SPM and a 1-1/4" stroke length for faster material removal. REDLINK&trade PLUS electronics ensure maximum performance under stress in addition to protection from overloading, overheating, and over-discharging. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack (not included) delivers you up to 2.5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries. This MILWAUKEE® M18 FUEL&trade SAWZALL® is designed to perform in the most demanding applications and is our most durable cordless reciprocating saw yet. A wear-resistant blade change, anti-corrosion blade clamp, and metal reinforced battery rails provide longer component life and stand up to the toughest jobsite conditions. The M18 FUEL&trade SAWZALL® Recip Saw weighs less than the previous generation and features an adjustable shoe, integrated LED light, and a hanging hook for convenient storage on the job. Compatible with ONE-KEY&trade, this reciprocating saw wirelessly connects to a smartphone to customize, track, and manage the tool&rsquos performance and location. Tool customization allows you to connect and control settings such as output speed and trigger ramp up for smoother cut starts. A selectable Cut-Brake feature automatically stops the blade from reciprocating at the end of a cut, reducing the risk of damaging sensitive materials near the cut in most applications. The tool&rsquos memory supports up to 3 custom profiles that can be easily accessed with the touch of a button on the tool. Integrated tool tracking, also available through ONE-KEY&trade, provides you with full visibility to how and where tools are being used across your network of jobs and users.
Qty:
Part #:729-2365-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Lighting. Product Level 3 TOL System. Product Level 4 TOL Flood Lights. AX Item Number 236520. Country of Origin CHN. Harmonized Tariff 8513104000.:
Qty:
Part #:729-2737B-20
- Country of Origin VNM:
Qty:
Part #:264820
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Cutting. Product Level 3 TOL Shaping and Forming. Product Level 4 TOL Sanders. Product Level 5 . AX Item Number 264820. Country of Origin VNM. Harmonized Tariff 8467290015.:
Qty:
Part #:264920
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Cutting. Product Level 3 TOL Shaping and Forming. Product Level 4 TOL Sanders. Product Level 5 TOL Blank. AX Item Number 264920. Country of Origin CHN. Harmonized Tariff 8467290015.:
Qty:
Part #:729-2545-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Cutting. Product Level 3 TOL Wood Cutting. Product Level 4 TOL Jig Saw. Product Level 5 TOL Blank. AX Item Number 254520. Country of Origin CHN. Harmonized Tariff 8467220070.:
Qty:
Displaying: 1 - 19 of 19 Matching Items