Hackzall
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Hackzall Router Soldering Iron Tower Light Work Light
Part #:511341
- M18&trade Work Light
OUTSHINE, OUTLAST. The M18&trade Work Light lasts 600X longer than conventional incandescent bulbs. Powered by the M18&trade REDLITHIUM&trade battery, it runs up to 4X longer on a single charge. Its 135° rotating head allows you to easily direct the light beam at the desired work area, while its integrated hook enables hands-free use.With a sealed aluminum head to provide impact and weather resistance, the cordless work light comes with a limited lifetime LED warranty.
Qty:
Part #:729-2131-20
- M18&trade ROCKET&trade Dual Power Tower Light (Discontinued, recplaced by 2131-20)
25% More Light, All Day Operation. The M18&trade ROCKET&trade Dual Power Tower Light is providing more light on the job with 2,500 lumens of TRUEVIEW&trade High Definition Output. All while having the capability being Dual Power, powered by M18&trade or extension cord.The light head can be extended from 4-7&rsquo to light overhead work or minimize shadows when casting light downward. Capable of filling large areas with light, it provides 2,500 lumens in its high mode, 1,100 in medium and 700 in low, and it can run for up to 4, 8, or 12 hours with an M18&trade REDLITHIUM&trade XC 5.0 Battery Pack. It uses TRUEVIEW&trade High Definition Output providing neutral white color and a high color rendering index paired with a Milwaukee® designed reflector to produce an even beam pattern. Its reinforced legs are impact resistant, and its low center of gravity provides a stable base. The light head is protected by an impact-resistant lens and bezel, and it nests into a protective shroud for secure transport and storage. Its LEDs never need to be replaced, and are backed by a limited lifetime warranty. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.
Qty:
Part #:729-2625-20
- M18&trade HACKZALL® Recip Saw (Tool Only)
Our M18&trade HACKZALL® One-Handed Recip Saw features a Dual Gear Anti-Vibration System providing you with unmatched comfort and control. Its compact, lightweight design gives you superior control and versatility. The cordless recip saw's powerful motor gives you 0-3,000 strokes per minute while its 3/4&rdquo stroke length allows you to perform fast cuts through a wide range of material such as wood, metal, and PVC. The dual gear anti-vibration system increases control and accuracy. The HACKZALL® One-Handed Recip Saw also features a QUIK-LOK&trade blade clamp which allows you to perform fast and easy blade changes.
Qty:
Part #:271920
- M18 FUEL&trade Hackzall® (Tool Only)
The Milwaukee 2719-21 M18&trade FUEL&trade HACKZALL® is the fastest cutting and most powerful one-handed reciprocating saw. Utilizing a POWERSTATE&trade Brushless Motor and a best in class 7/8" stroke length, the M18&trade FUEL&trade HACKZALL® cuts up to 50% faster than competitors. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS&trade Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris.
Qty:
Part #:272320
- AX Item Number 272320. Country of Origin MEX. Harmonized Tariff 8467290055:
Qty:
Part #:213620
- AX Item Number 213620. Country of Origin CHN. Harmonized Tariff 8513104000:
Qty:
Part #:729-5625-20
- 3-1/2 Max HP Fixed-Base Production Router
Milwaukee's heavy-duty, 3-1/2 max hp fixed-base production router, model 5625-20, features a powerful 15 amp Milwaukee-built motor with electronic variable speed (10,000-22,000 rpm), premium feedback circuitry and soft-start. To ensure a consistent, quality finish, the 36-position speed dial allows the user to precisely match the tool rpm to the bit diameter while the premium electronic feedback circuitry maintains speed and power under load. For controlled start-ups and reduced motor wear, the 5625-20 router also features a reliable electronic soft-start. Fully-loaded for production free-hand and router table routing, the router features Milwaukee's exclusive linear height adjustment system with above-the-table access, providing fast, precise coarse adjustments to within 1/8 in. and micro-fine adjustments to within 1/64 in. Unlike helical systems, the motor doesn&rsquot spin as the height is changed, ensuring that the motor controls and power cord remain in a constant, optimal position. The revolutionary system can be accessed from above a router table with the included T-wrench or any 3/8 in. hex socket wrench with extension, eliminating the need for awkward, below the table adjustments or the need for an auxiliary router lift. With an industry standard bolt-hole pattern and router base diameter along with removable handles for insert plate clearance, the 5625-20 readily converts any existing table or production jig set-up. For added protection when table-mounted, the router features an exclusive motor contamination shield that keeps damaging debris out without sacrificing airflow. The router also features a durable, rubber shield for dust-free access to the height adjustment system. For maximum operator control and comfort, the 5625-20 router has impact-resistant, tactile-grip handles set wide apart and angled forward. A heavy-duty, 22 amp switch and speed control dial positions are conveniently located to allow the operator full motor control while keeping both hands on the tool. The router features a durable, machined aluminum motor housing and base along with premium 1/2 in. self-releasing collet, 100% sealed ball bearings and a durable 8 ft. power cord with flexible strain relief for years of accurate, reliable operation.
Qty:
Part #:729-2696-24
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Combo Kits. Product Level 3 TOL 3 - 4 Piece Kits. Product Level 5 TOL Blank. AX Item Number 269624. Country of Origin VNM. Harmonized Tariff 8467290040.:
Qty:
Part #:729-2488-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Metal Working. Product Level 3 TOL Heating Tools. Product Level 4 TOL Blank. Product Level 5 . AX Item Number 248820. Country of Origin THA. Harmonized Tariff 8515110000.:
Qty:
Part #:729-2488-21
- M12&trade Soldering Iron Kit
The M12&trade Soldering Iron delivers fast application speeds by reaching operational temperature in under 18 seconds and maintaining an optimized temperature throughout the most demanding applications. The heat indicator utilizes REDLINK&trade INTELLEGENCE to notify users when the tool is ready-to-use and safe-to-store, eliminating the guesswork. The 3-stop pivoting head provides unmatched access by allowing users the ability to adapt the tool for the application and solder in more confined spaces. The M12&trade Soldering Iron powered by REDLITHIUM&trade battery technology delivers up to 40 minutes of run-time on a M12&trade Compact Battery Pack.
Qty:
Displaying: 1 - 10 of 10 Matching Items