Hammer Drill
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Hammer Drill Press Tool Router Sliding Compound Miter Saw Soldering Iron
Part #:729-2922-22
- M18&trade FORCE LOGIC&trade Press Tool w/ ONE-KEY&trade w/ 1/2"-2" CTS Jaws
Our M18&trade FORCE LOGIC&trade Press Tool with ONE-KEY&trade with 1/2"-2" CTS Jaws is the industry&rsquos first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all MILWAUKEE® press tools, the in-line design with a forward hand position unlocks your ability to press with one hand and will fit nearly anywhere you can fit your arm. Equipped with REDLINK&trade electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can&rsquot complete. This press tool is ONE-KEY&trade enabled, logging, and uploading data from every press for retrieval via the ONE-KEY&trade desktop or mobile app. This allows for performance monitoring and provides you peace of mind in quality connections. With ½&rdquo to 4&rdquo capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors. In addition to the press tool, this kit includes two M18&trade REDLITHIUM&trade CP2.0 battery packs, 1/2 in., 3/4 in., 1 in., 1 1/4 in, 1 1/2 in., and 2 in. jaws, and a carrying case.
Qty:
Part #:500250
-
TE 2 Rotary hammer Rotary hammer perf pkg TE 2 #3497789
Compact dual-mode, pistol-grip SDS Plus (TE-C) rotary hammer &ndash for hammer drilling and rotary-only drilling
Weight according EPTA-Procedure 01/20036 lb.
Working modeHammer drilling, Drilling
Hammer drilling diameter range5/32 - 7/8 in
Kit Contains
TE 2 120V Rotary Hammer
TE 2 Tool Case
Chuck Grease
Hammer Drill Bit TE-CX 3/8"x6"
Hammer Drill Bit TE-CX 1/4"x6"
Hammer Drill Bit TE-CX 3/16"x6"
Weight according EPTA-Procedure 01/20036 lb.Working modeHammer drilling, DrillingHammer drilling diameter range5/32 - 7/8 inOptimum Hammer drilling range5/32 - 15/32 inSingle impact energy1.3 ft-lbsHammer drilling RPM1200 rpmFull hammering frequency4600 impacts/minuteFunctionalityReverse mode, Depth gaugeTriaxial vibration value for hammer drilling into concrete (ah,HD)13.5 m/s² 1 A-weighted emission sound pressure level91 dB (A) 2 Dimensions (LxWxH)13.9 x 3.5 x 8 mm
$
417.59
Qty:
Part #:272320
- AX Item Number 272320. Country of Origin MEX. Harmonized Tariff 8467290055:
Qty:
Part #:729-5378-20
- 1/2 in. Pistol Grip Dual Torque Hammer Drill, 0-1350/0-2500 RPM (Discontinued, Replaced by 5376-20)
The power to drill ½&rdquo holes in concrete. The versatility to excel at wood and steel applications. This powerful 7.5-amp, ½&rdquo Hammer Drill features dual trigger speed control in two ranges, with more power for the toughest applications or more speed and less torque for lighter applications. Use it for drilling in wood with flat boring bits, hole saws, auger bits and Selfeed bits, or in steel with twist bits and in concrete with percussion bits. The removable side handle helps set the depth rod for pre-set hole drilling. The heavy-duty metal gear case withstands daily jobsite use, yet the drill&rsquos lightweight, balanced pistol-grip design reduces fatigue during a long work day.
Qty:
Part #:729-5625-20
- 3-1/2 Max HP Fixed-Base Production Router
Milwaukee's heavy-duty, 3-1/2 max hp fixed-base production router, model 5625-20, features a powerful 15 amp Milwaukee-built motor with electronic variable speed (10,000-22,000 rpm), premium feedback circuitry and soft-start. To ensure a consistent, quality finish, the 36-position speed dial allows the user to precisely match the tool rpm to the bit diameter while the premium electronic feedback circuitry maintains speed and power under load. For controlled start-ups and reduced motor wear, the 5625-20 router also features a reliable electronic soft-start. Fully-loaded for production free-hand and router table routing, the router features Milwaukee's exclusive linear height adjustment system with above-the-table access, providing fast, precise coarse adjustments to within 1/8 in. and micro-fine adjustments to within 1/64 in. Unlike helical systems, the motor doesn&rsquot spin as the height is changed, ensuring that the motor controls and power cord remain in a constant, optimal position. The revolutionary system can be accessed from above a router table with the included T-wrench or any 3/8 in. hex socket wrench with extension, eliminating the need for awkward, below the table adjustments or the need for an auxiliary router lift. With an industry standard bolt-hole pattern and router base diameter along with removable handles for insert plate clearance, the 5625-20 readily converts any existing table or production jig set-up. For added protection when table-mounted, the router features an exclusive motor contamination shield that keeps damaging debris out without sacrificing airflow. The router also features a durable, rubber shield for dust-free access to the height adjustment system. For maximum operator control and comfort, the 5625-20 router has impact-resistant, tactile-grip handles set wide apart and angled forward. A heavy-duty, 22 amp switch and speed control dial positions are conveniently located to allow the operator full motor control while keeping both hands on the tool. The router features a durable, machined aluminum motor housing and base along with premium 1/2 in. self-releasing collet, 100% sealed ball bearings and a durable 8 ft. power cord with flexible strain relief for years of accurate, reliable operation.
Qty:
Part #:729-5376-20
- Business Unit Tools. Product Level 1 Tools Corded. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Hammer Drills. Product Level 5 TOL Blank. AX Item Number 537620. Country of Origin CHN. Harmonized Tariff 8467210070.:
Qty:
Part #:729-2473-20
- M12&trade FORCE LOGIC&trade Press Tool
Our M12&trade FORCE LOGIC&trade Press Tool Kit is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2473-22
- M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws
Our M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2922-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Plumbing. Product Level 3 TOL Press. Product Level 4 TOL Tool (No Jaws). Product Level 5 TOL Force Logic. AX Item Number 277320. Country of Origin DEU. Harmonized Tariff 8467290090.:
Qty:
Part #:729-2902-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Hammer Drills. Product Level 4 TOL Blank. Product Level 5 TOL Blank. AX Item Number 290220. Country of Origin MEX. Harmonized Tariff 8467210070.:
Qty:
Part #:729-2773-20L
- Country of Origin DEU:
Qty:
Part #:729-2733-20
- Country of Origin CHN:
Qty:
Part #:729-2488-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Metal Working. Product Level 3 TOL Heating Tools. Product Level 4 TOL Blank. Product Level 5 . AX Item Number 248820. Country of Origin THA. Harmonized Tariff 8515110000.:
Qty:
Part #:729-2488-21
- M12&trade Soldering Iron Kit
The M12&trade Soldering Iron delivers fast application speeds by reaching operational temperature in under 18 seconds and maintaining an optimized temperature throughout the most demanding applications. The heat indicator utilizes REDLINK&trade INTELLEGENCE to notify users when the tool is ready-to-use and safe-to-store, eliminating the guesswork. The 3-stop pivoting head provides unmatched access by allowing users the ability to adapt the tool for the application and solder in more confined spaces. The M12&trade Soldering Iron powered by REDLITHIUM&trade battery technology delivers up to 40 minutes of run-time on a M12&trade Compact Battery Pack.
Qty:
Part #:729-49-16-2697X
- 1/2" - 2" IPS-P Pivoting Press Ring Kit for M18&trade FORCE LOGIC&trade Press Tools
Our IPS-P Pivoting Press Ring Kits are designed for use with M18&trade & M12&trade FORCE LOGIC&trade Press Tool on Viega® MegaPress®, Apollo® PowerPress® and other press fitting systems. The IPS-P Pivoting Press Ring Kit is a more efficient alternative to welding and threading, enabling you to press connections on schedule 5 up to schedule 40 black iron pipe and 304/316 stainless steel pipe. Pivoting functionality delivers greater access in tight spaces when paired with a compatible Milwaukee® Ring Jaw and FORCE LOGIC&trade Press Tool. Our press blocking system prevents improper ring and ring jaw mismatch, providing peace of mind in quality connections. The IPS-P Pivoting Press Rings, combined with a compatible Milwaukee® Ring Jaw and in-line FORCE LOGIC&trade Press Tool, deliver unrivaled access in tight spaces and around installed pipes, providing you with controlled, flameless copper connections for unmatched productivity.
Qty:
Qty:
Displaying: 1 - 16 of 16 Matching Items