Charger
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Charger Hex Driver Rotarty Hammer Torque Wrench
Part #:729-2401-20
- M12&trade 1/4" Hex Screwdriver (Tool Only)
Optimized for the professional who frequently encounters precision fastening applications, the Milwaukee® M12&trade ¼&rdquo Hex Screwdriver delivers unmatched precision, power and portability along with a slimmer, more ergonomic grip. A variable speed trigger and 0-500RPM give the user unrivaled fastening control, 15+1 clutch settings prevent over tightening fasteners, and 175 in-lbs. of torque provides the ability to accomplish tough applications. At 6-1/2 in. long and weighing only 2.0lbs its compact, lightweight and durable design provides greater comfort and fits in tighter spaces on the jobsite. The onboard LED light and fuel gauge help you increase productivity and avoid interruptions. Two belt-clip positions for both left- and right-handed users and one-handed bit changes provide maximum ease-of-use. The REDLITHIUM&trade Battery Pack delivers more work per charge and more work over pack life than the competitors.
Qty:
Part #:805467
- M18 FUEL&trade 1/2" High Torque Impact Wrench w/ Friction Ring
Our M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE&trade Brushless Motor delivers up to 1,200 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with our M18&trade REDLITHIUM&trade FORGE&trade Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. Our patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL&trade offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF&trade control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers our users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½&rdquo Friction Ring design allows for quick & tool-free socket changes.
Qty:
Part #:276722
- M18 FUEL&trade High Torque ½&rdquo Impact Wrench with Friction Ring Kit (Replaces 2767-22 & 2767-22R)
Our M18 FUEL&trade 1/2" High Torque Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, our users will be able to get the job done faster and be more productive throughout their day. By providing the industry&rsquos most compact cordless High Torque Impact Wrench at 8.39&rdquo in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL&trade with Bolt Removal mode gives our users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. Our tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives our users ultimate comfort during prolonged use while lasting longer against corrosive materials. Our M18 REDLITHIUM&trade XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.
Qty:
Part #:729-2402-22
- M12 FUEL&trade 1/4" Hex 2-Speed Screwdriver Kit
The M12&trade FUEL&trade 1/4" Hex 2-speed Screwdriver Kit delivers longer productivity in a compact size. This 2-speed screwdriver provides up to 10X longer motor life, 2X more power, and 2X more runtime. The POWERSTATE&trade Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. The REDLITHIUM&trade 2.0 Battery Pack delivers up to 20% more power and 2X more recharges than standard lithium-ion batteries, as well as best-in-class performance in extreme jobsite conditions. The onboard fuel gauge helps you monitor the charge more accurately, so there&rsquos less downtime on the job. REDLINK PLUS&trade intelligence ensures maximum performance and protection from overload, overheating and over-discharge.The M12 FUEL 1/4" Hex 2-speed Screwdriver&rsquos optimized design results in superior speed for greater productivity on the jobsite. Its compact size allows users to work in tight spaces. The built-in LED worklight illuminates work surfaces in dark work spots.
Qty:
Part #:510513
- M18&trade & M12&trade Multi-Voltage Charger
Always be ready for your next job with this cross-system charger. The M18&trade & M12&trade Multi-Voltage Charger accepts all M18&trade and M12&trade batteries, so you&rsquoll always be prepared and productive, especially on jobs that require a mix of M12 and M18 Milwaukee cordless power tools. This versatile unit charges batteries sequentially, reducing your time to manage charge cycles. The charger communicates directly with the battery pack to monitor cell voltage, temperature and charge status to ensure a full charge. Power up your Milwaukee compact batteries in 30 minutes and extended capacity batteries in 60 minutes, without the need for extra chargers on the jobsite.
Qty:
Part #:729-2402-20
- M12 FUEL&trade 1/4" Hex 2-Speed Screwdriver (Tool Only)
The M12&trade FUEL&trade 1/4" Hex 2-speed Screwdriver delivers longer productivity in a compact size. This 2-speed screwdriver provides up to 10X longer motor life, 2X more power, and 2X more runtime. The POWERSTATE&trade Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. The REDLITHIUM&trade 2.0 Compact Battery Pack (sold separately) delivers up to 20% more power and 2X more recharges than standard lithium-ion batteries, as well as best-in-class performance in extreme jobsite conditions. The onboard fuel gauge helps you monitor the charge more accurately, so there&rsquos less downtime on the job. REDLINK PLUS&trade intelligence ensures maximum performance and protection from overload, overheating and over-discharge. The M12 FUEL 1/4" Hex 2-speed Screwdriver&rsquos optimized design results in superior speed for greater productivity on the jobsite. Its compact size allows users to work in tight spaces. The built-in LED worklight illuminates work surfaces in dark work spots.
Qty:
Part #:522042
- M18&trade Six Pack Sequential Charger
The M18&trade Six Pack Sequential Charger offers a compact design, integrated hang holes for vertical mounting, and a pass through plug to conserve outlet space. The new unit will charge M18&trade compact batteries in 30 minutes and extended capacity (XC) batteries in 60 minutes. With this new six pack charger, users can reduce the amount of time spent changing out batteries, increasing productivity on the jobsite.
Qty:
closeout
$118.00 MSRP
$
75.22
Part #:521215
- CLOSEOUTS Only 1 Left!
- One Hour NiCd AC Charger
The One Hour NiCd Power Plus 120 volt AC charger will recharge 12V, 14.4V and 18V Power Plus Batteries. Recharges both Nickel Cadmium and Nickel Metal Hydride batteries. Charges batteries in one hour.
Qty:
Part #:500197
- Key Features
Compact power Delivers 175 in-lbs of torque yet weighs 2 lbs
REDLITHIUM&trade Battery Technology Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market.
Quick-change chuck For convenient, one-handed bit changes
Variable-speed trigger Provides increased control
Battery fuel gauge Displays remaining runtime
Our M12&trade ¼&rdquo Hex Screwdriver Kit is optimized for professionals who frequently encounter precision fastening applications. The cordless hex screwdriver delivers unmatched precision, power, and portability along with a slimmer, more ergonomic grip. A variable speed trigger and 0-500 RPM provides you with unrivaled fastening control while 15+1 clutch settings to prevent over-tightening of fasteners. The tool's 175 in-lbs. of torque provide you with the power to handle tough applications. The hex head screwdriver is only 6-1/2" long and only weighs 2.0lbs. Its compact, lightweight and durable design gives you better access to tight job site spaces without sacrificing comfort. An onboard LED light and fuel gauge help increase your productivity and avoid interruptions. The hex screwdriver features two belt-clip positions for both left- and right-handed users and one-handed bit changes for maximum ease-of-use. The REDLITHIUM&trade Battery Pack gives you more work per charge and more work over pack life than the competitors. In addition to the tool, our kit includes two M12&trade REDLITHIUM&trade Batteries, one M12&trade charger, and a contractor bag.
Qty:
Part #:729-48-59-2819
- 28-Volt Charger
Power up V28&trade and M28&trade Lithium-Ion batteries in less than one hour. Milwaukee's 28-Volt Charger quickly charges V28 and M28 Lithium-Ion batteries for less downtime on the job. The high-visibility LED light displays the charge status from across the room so you can monitor recharges without interrupting your work. The unit&rsquos pass-through plug conserves valuable outlet space. Get single-charger simplicity when working with all of your V28 and M28 cordless power tools.
Qty:
closeout
$
118.00
Qty:
Qty:
Part #:729-5317-21
- Business Unit Tools. Product Level 1 Tools Corded. Product Level 2 Tools Hammers. Product Level 3 TOL SDS Max. Product Level 4 TOL SDS Max/Spline Hammers. AX Item Number 531721. Country of Origin CHN. Harmonized Tariff 8467290080.:
Qty:
Part #:729-48-59-1807
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Batteries. Product Level 3 TOL Chargers. Product Level 4 TOL Chargers. AX Item Number 48591807. Country of Origin VNM. Harmonized Tariff 8504409550.:
Qty:
Part #:729-48-59-1810
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Batteries. Product Level 3 TOL Chargers. Product Level 4 TOL Chargers. AX Item Number 48591810. Country of Origin VNM. Harmonized Tariff 8504409550.:
Qty:
Qty:
Part #:729-48-59-1809
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Batteries. Product Level 3 TOL Chargers. Product Level 4 TOL Chargers. AX Item Number 48591809. Country of Origin VNM. Harmonized Tariff 8504409550.:
Qty:
Part #:729-2966-20
- M18 FUEL&trade 1/2" High Torque Impact Wrench w/ Pin Detent
Our M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Pin Detent delivers up to 900 ft-lbs of fastening torque, greater access in tight spaces, and greater durability. The POWERSTATE&trade Brushless Motor delivers up to 900 ft-lbs of Fastening Torque and 1,100 ft-lbs of Nut-Busting Torque, providing users with greater power for the most demanding applications. At 7.3&rdquo in length, the compact size gives users greater access in tight spaces. The robust design allows users to tackle the most demanding applications on the jobsite all while prolonging tool performance. Our patented battery isolation system ensures a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. The integrated lanyard loop allows users to easily transfer and store the tool. 4-Mode DRIVE CONTROL&trade offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF&trade control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers our users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½&rdquo Pin Detent anvil design maximizes socket retention.
Qty:
Part #:729-2916-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Hammers. Product Level 3 TOL SDS Plus. Product Level 4 TOL SDS Plus Hammers. Product Level 5 TOL FUEL. AX Item Number 291620. Country of Origin CHN. Harmonized Tariff 8467290080.:
Qty:
Part #:729-48-59-1815
- M18&trade Dual Bay Simultaneous Super Charger
Our M18&trade Dual Bay Simultaneous Super Charger delivers up to 6X faster charging to 80%, maximizing productivity by reducing downtime throughout the day. In just 15 minutes, users can charge an M18&trade REDLITHIUM&trade FORGE&trade XC6.0 Battery to 80%, allowing users to get back to work faster than ever before. Super Chargers are Milwaukee&rsquos fastest chargers, providing you with the fastest charge times for all of your M18&trade REDLITHIUM&trade batteries. This Super Charger is capable of simultaneously charging up to 2 batteries, while leveraging CHARGE ADAPT&trade Adaptive Charge Distribution to distribute power between bays for maximized productivity. The CHARGE ADAPT&trade LED light will illuminate for the battery that is able to receive the most amount of power, resulting in the user getting one pack back faster than fully simultaneous chargers. The M18&trade Dual Bay Simultaneous Super Charger is COOL-CYCLE&trade Capable. COOL-CYCLE&trade Active Cooling System, provides high-speed cooling for less downtime. The active cooling feature works with M18&trade batteries that have COOL-CYCLE&trade capability. The charger features REDLINK&trade Intelligence and communicates directly with your battery to monitor cell voltage, temperature, and charge status to optimize the performance and maximize the life of the pack. This charger is compatible with all M18&trade Batteries.
$
436.00
Qty:
Displaying: 1 - 20 of 20 Matching Items