Hex Impact Driver
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Hex Impact Driver Power Inverter Sawzall Site Light Sliding Compound Miter Saw String Trimmer Thread Rod Cutter
- Voltage: 18V
Part #:729-2657-20
- M18&trade 2-Speed 1/4" Hex Impact Driver (Tool Only)
The M18&trade Cordless 2-Speed 1/4" Hex Impact Driver is the most powerful 1/4" hex compact impact driver in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-Pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs of fastening torque for class-leading performance. This is the only tool in its class to offer multiple speed/torque modes through proprietary 2-Mode Drive Control&trade. REDLINK&trade Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18&trade Cordless 1/4" Hex Impact Driver features an LED Light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Qty:
Part #:729-2145-20
- M18&trade RADIUS&trade Compact Site Light
MOST VERSATILE LIGHT ON SITE - The M18&trade RADIUS&trade Compact Site Light is the World&rsquos first high output cordless site light on the market, and has the ability to provide light in task, area, and overhead applications. With 4,400 lumens of TRUEVIEW&trade High Definition output, the M18&trade Radius&trade LED Compact Site Light provides enough light to illuminate large work areas, and can be turned down to as low as 1,000 lumens for working in confined areas. A high impact polycarbonate lens, and IP54 ingress protection allows it to live in the toughest conditions. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.
Qty:
Part #:729-2853-20
- M18 FUEL&trade 1/4" Hex Impact Driver (Tool Only) (Discontinued, Replaced by 2953-20)
The M18 FUEL&trade ¼&rdquo Hex Impact Driver is the Fastest, Most Compact, and Most Powerful tool in its class. The POWERSTATE&trade Brushless motor delivers up to 2,000in-lbs of torque and up to 30% Faster Driving speed, increasing user&rsquos productivity for the most demanding fasteners on the job. At only 4.59&rdquo in length, this is the Most Compact tool in its class, allowing users to have more access in tight spaces. The REDLINK PLUS&trade intelligence ensures maximum performance and protects from overloads, heating and or over-discharge. The REDLITHIUM Battery Pack delivers more work per charge and more work over the life of the pack when compared to competitors. The 4-Mode DRIVE CONTROL&trade provides greater control over output speed and power, for greater versatility. The Self-Tapping Screw mode provides faster installation time by reducing stripping of fasteners.
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2825-20ST
- M18 FUEL&trade String Trimmer w/ QUIK-LOK&trade
Designed to meet the needs of landscape maintenance professionals, our M18 FUEL&trade String Trimmer w/ QUIK-LOK&trade provides you with the power to clear thick brush, reaches full throttle in under 1 second, and delivers up to 1 hour of run-time per charge. The cordless string trimmer is made up of two components &ndash the M18 FUEL&trade Power Head w/ QUIK-LOK&trade and QUIK-LOK&trade String Trimmer Attachment. This M18 FUEL&trade Power Head, part of the QUIK-LOK&trade Attachment System, is compatible with multiple attachments such as our Edger, Articulating Hedge Trimmer, and Pole Saw attachment. This gives you the ability to quickly swap out attachments on a single power head, delivering ultimate versatility and a lower cost of ownership. The POWERSTATE&trade Brushless Motor delivers up to 6,200 RPM with up to a 16&rdquo cutting swath, and gives you the power to maintain speed in demanding applications without bogging down. The motor is positioned in the rear of the trimmer to provide the best combination of power, balance, and maneuverability. REDLINK PLUS&trade intelligence gives you maximum performance while protecting from overload, overheating and over discharge. The advanced electronic package also delivers instantaneous throttle response, high and low speeds, and a variable speed trigger giving you ultimate control over the power range. The M18&trade REDLITHIUM&trade HD9.0 Battery (sold separately) gives you best in class performance and run-time in all applications, delivering up to 1 hour of run-time per charge. The Easy Load Trimmer Head provides you with an easy line loading experience and the ability to load up to 25' of trimmer line in under 30 seconds. Our M18 FUEL&trade String Trimmer w/ QUIK-LOK&trade is part of the M18&trade system which is fully compatible with over 175 tools.
Qty:
Part #:729-2893-22CX
- M18 Brushless 2-Tool Combo Kit, Hammer Drill/Impact Driver
Our M18&trade Brushless 2-Tool Combo Kit (2893-22CX) offers the best in class drilling and fastening solutions. The 1/2" Hammer Drill (2902-20) and 1/4" Hex Impact Driver (2850-20) feature the M18&trade cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The Brushless 1/2in. Hammer Drill is the most powerful drill in its class, delivering 725 in.-lbs. of torque. The 1/4 in. Hex Impact Driver has the fastest application speed in its class and delivers 1,600 in.-lbs. of torque. Both of our compact tools feature MILWAUKEE® brushless motors optimized specifically for the tool. Built-in REDLINK&trade electronics enhances the performance of the M18&trade REDLITHIUM&trade batteries, providing more efficient power delivery and fewer trips to the charger. This combo kit includes our M18&trade 1/2" Hammer Drill, M18&trade 1/4" Hex Impact Driver, (1) M18&trade REDLITHIUM XC4.0 Battery Pack, (1) M18&trade REDLITHIUM CP2.0 Battery Pack, M18&trade/M12&trade Multi-Voltage Charger, (2 )belt clips, Side Handle, and Contractor Bag.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Part #:729-2696-24
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Combo Kits. Product Level 3 TOL 3 - 4 Piece Kits. Product Level 5 TOL Blank. AX Item Number 269624. Country of Origin VNM. Harmonized Tariff 8467290040.:
Qty:
Part #:729-2656-20
- M18&trade 1/4" Hex Impact Driver (Tool Only)
The M18&trade Cordless 1/4" Hex Impact Driver is the most powerful 1/4" hex compact impact driver in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-Pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs of fastening torque for class-leading performance. REDLINK&trade Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18&trade Cordless 1/4" Hex Impact Driver features an LED Light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Qty:
Part #:729-2760-20
- M18 FUEL&trade SURGE&trade 1/4" Hex Hydraulic Driver (Tool Only)
The M18 FUEL&trade SURGE&trade 1/4" Hex Hydraulic Driver is the quietest cordless fastening solution on the market. With Milwaukee's new FLUID-DRIVE&trade Hydraulic Powertrain, users will experience up to 50% quieter operation, 3X less vibration for smoother operation, and faster driving speeds compared to standard impacts. The POWERSTATE&trade Brushless Motor delivers up to 0-3,000 RPM with constant power output to drive screws faster. REDLINK PLUS&tradeIntelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM&trade Compact Batteries or Extended Capacity Batteries (sold separately), which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-Mode DRIVE CONTROL&tradeprovides greater control over output speed and power for greater versatility. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
Qty:
Part #:729-2733-20
- Country of Origin CHN:
Qty:
Part #:729-2893-22
- M18 Brushless 2-Tool Combo Kit, Hammer Drill/ 3-Speed Impact Driver
Our M18&trade Brushless 2-Tool Combo Kit (2893-22) offers the best in class drilling and fastening solutions. The 1/2" Brushless Hammer Drill (2902-20) and 1/4" Hex Brushless 3 Speed Impact Driver (2851-20) feature the M18&trade cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The brushless 1/2" Hammer Drill is the most powerful drill in its class, delivering 725 in.-lbs. of torque. The 1/4" Hex 3 Speed Impact Driver has the fastest application speed in its class and delivers 1,600 in.-lbs. of torque. Both of our compact tools feature MILWAUKEE® brushless motors optimized specifically for the tool. Built-in REDLINK&trade electronics enhances the performance of the M18&trade REDLITHIUM&trade batteries, providing more efficient power delivery and fewer trips to the charger. This combo kit includes our M18 Brushless 1/2" Hammer Drill, M18&trade Brushless 1/4" Hex Impact Driver, (2) M18&trade REDLITHIUM&trade XC4.0 Batteries, a M18&trade/M12&trade Multi-Voltage Charger, Side Handle, (2) Belt Clips and a Contractor Bag
Qty:
Part #:729-3000-21
- Country of Origin CHN:
Qty:
Part #:729-3697-22
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Combo Kits. Product Level 3 TOL 2 Piece Kits. Product Level 4 TOL FUEL. Product Level 5 TOL FUEL. AX Item Number 369722. Country of Origin VNM. Harmonized Tariff 8467290040.:
Qty:
Part #:295320
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Impact Drivers. Product Level 4 TOL Bare. Product Level 5 TOL FUEL. AX Item Number 295320. Country of Origin VNM. Harmonized Tariff 8467290040.:
Qty:
Part #:729-2953-22
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Impact Drivers. Product Level 4 TOL 2 Batt. Product Level 5 TOL FUEL. AX Item Number 295322. Country of Origin VNM. Harmonized Tariff 8467290040.:
Qty:
Part #:284620
- Key Features
Faster Simultaneous Power
Fits All M18&trade Batteries
175W Continuous Watts
Ideal for laptops, cellphones, TVs, and other small devices
Rafter hooks allows for versatility on the jobsite to hang on common materials or carts
Lightweight, compact design
Battery, charger, and device cords not included
5 year warranty
Includes
(1) M18&trade TOP-OFF&trade 175W POWER SUPPLY (2846-20)
Qty:
Displaying: 1 - 17 of 17 Matching Items