Hoist
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Hoist Reciprocating Saw Replacement Parts Rotary Hammer Drill Router
Part #:805470
- M18 FUEL&trade SAWZALL® Recip Saw - 1 Battery XC5.0 Kit
Our M18 FUEL&trade SAWZALL® Recip Saw 1 Battery Kit is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The MILWAUKEE® M18 FUEL&trade SAWZALL® is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE&trade Brushless Motor to provide you with 3,000 SPM and a 1-1/4" stroke length for faster material removal. REDLINK&trade PLUS electronics ensure
Qty:
Part #:805472
- M18 FUEL&trade SAWZALL® Reciprocating Saw - 2 Battery XC5.0 Kit
Our M18 FUEL&trade SAWZALL® Recip Saw 2 Battery Kit is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The MILWAUKEE® M18 FUEL&trade SAWZALL® is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE&trade Brushless Motor to provide you with 3,000 SPM and a 1-1/4" stroke length for faster material removal. REDLINK&trade PLUS electronics ensure maximum performance under stress as well as protection from overloading, overheating, and over-discharging. The included M18&trade REDLITHIUM&trade XC5.0 Battery Pack delivers you up to 2.5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries. The M18 FUEL&trade SAWZALL® Recip Saw is designed to perform in the most demanding applications and is our most durable cordless reciprocating saw yet. A wear-resistant blade change, anti-corrosion blade clamp, and metal reinforced battery rails provide longer component life and stand up to the toughest jobsite conditions. The M18 FUEL&trade SAWZALL® Recip Saw is lighter weight than the previous generation and features an adjustable shoe, integrated LED light, and a hanging hook for convenient storage on the job.
Qty:
Part #:262120
- M18&trade SAWZALL® Reciprocating Saw (Tool Only)
The M18&trade SAWZALL® Reciprocating Saw delivers unmatched durability, speed, and run-time. The all metal gearing and REDLINK&trade Intellgence provide ultimate performance and protection against jobsite conditions. The M18&trade SAWZALL® Reciprocating Saw provides up to 30% faster cutting and 50% more run-time in key applications versus leading competitors. The slim front end design provides improved ergonomics, offering maximum comfort and control.
Qty:
Part #:834-630705000
- Inner support flange for angle grinders (630705000)
For all angle grinders with M 14-spindle thread
Qty:
Part #:834-630706000
- Flange nut M 14 (630706000)
For all angle grinders with M 14-spindle thread
Qty:
Part #:729-5316-21
- 1-9/16" Spline Rotary Hammer (Discontinued, Replaced by 5317-21)
Get optimal power for concrete drilling and chipping applications. The 1-9/16&rdquo Spline Rotary Hammer offers a heavy-duty 5.5 ft-lbs of impact energy, plus 450 RPM and 3,000 BPM for fast, solid performance, even when drilling in hard aggregate. Constant Power Technology (CPTTM) ensures consistent drilling power for the toughest applications handled by electrical, mechanical, plumbing, HVAC and general construction contractors. A 12-position chipping adjustment lets you maintain the ideal hammer position while chipping in any orientation. A mechanical clutch protects the motor when the bit binds, and two-mode operation offers maximum versatility regardless of the application. The tool comes with a side handle and carrying case.
Qty:
Part #:810060
- For Use With Mfr. Model Number 600398420, 600407420, 600408420, 600410420, 600418420, 600428420, 600432420, 600464420, 600465420, 600468420, 600476420, 600488420, 600507420, 600548420, 600552420, 600562420, 600572420
$
8.27
Qty:
$
11.07
Qty:
Part #:834-341101480
- For Use With Mfr. Model Number 600160420, 600259420, 600263420, 600280420, 600286420, 600290420, 600292420, 600354420, 600376420, 600388420, 600408420, 600465420, 600562420, 600572420, 600680420, 600683420, 601451420, 601452420, 602131420, 606111420, 606204420, 606205420, 606696420, 606701420, 606702420, 606711420, 606721420, 606722420, 606724420
$
8.27
Qty:
Part #:272320
- AX Item Number 272320. Country of Origin MEX. Harmonized Tariff 8467290055:
Qty:
Part #:729-2722-21HD
- Country of Origin CHN:
Qty:
Part #:729-5625-20
- 3-1/2 Max HP Fixed-Base Production Router
Milwaukee's heavy-duty, 3-1/2 max hp fixed-base production router, model 5625-20, features a powerful 15 amp Milwaukee-built motor with electronic variable speed (10,000-22,000 rpm), premium feedback circuitry and soft-start. To ensure a consistent, quality finish, the 36-position speed dial allows the user to precisely match the tool rpm to the bit diameter while the premium electronic feedback circuitry maintains speed and power under load. For controlled start-ups and reduced motor wear, the 5625-20 router also features a reliable electronic soft-start. Fully-loaded for production free-hand and router table routing, the router features Milwaukee's exclusive linear height adjustment system with above-the-table access, providing fast, precise coarse adjustments to within 1/8 in. and micro-fine adjustments to within 1/64 in. Unlike helical systems, the motor doesn&rsquot spin as the height is changed, ensuring that the motor controls and power cord remain in a constant, optimal position. The revolutionary system can be accessed from above a router table with the included T-wrench or any 3/8 in. hex socket wrench with extension, eliminating the need for awkward, below the table adjustments or the need for an auxiliary router lift. With an industry standard bolt-hole pattern and router base diameter along with removable handles for insert plate clearance, the 5625-20 readily converts any existing table or production jig set-up. For added protection when table-mounted, the router features an exclusive motor contamination shield that keeps damaging debris out without sacrificing airflow. The router also features a durable, rubber shield for dust-free access to the height adjustment system. For maximum operator control and comfort, the 5625-20 router has impact-resistant, tactile-grip handles set wide apart and angled forward. A heavy-duty, 22 amp switch and speed control dial positions are conveniently located to allow the operator full motor control while keeping both hands on the tool. The router features a durable, machined aluminum motor housing and base along with premium 1/2 in. self-releasing collet, 100% sealed ball bearings and a durable 8 ft. power cord with flexible strain relief for years of accurate, reliable operation.
Qty:
Part #:729-9565
- 1 Ton Electric Chain Hoist
All Milwaukee Professional Electric Chain Hoists offer an array of load lift and height options. With 1/2 to 2 Ton capacities and 10 ft. to 20 ft. lifting heights, you can order a Milwaukee Electric Chain Hoist to meet your roughest needs. All offer a multi-disc magnetic brake for positive load holding and spotting. Adjustable upper and lower limit switches, overload limiting clutch and latch-type ridged top hook. You can get single or three-phase voltage motors to meet your operation power requirements. The 24-volt pushbutton station fits easily in your hand to allow thumb, trigger or two-handed operation.
Qty:
Part #:729-6519-30
- Sawzall® Recip Saw (Discontinued, Replaced by 6519-31)
The 6519-30 Sawzall® Recip Saw delivers best in class cut speed, durability and power with 0-3,000 strokes per minute, a 1-1/8&rdquo stroke length and a 12 Amp motor. The gear protecting clutch extends gear and motor life by absorbing high impact forces and a QUIK-LOK® blade clamp offers fast tool-free blade changes. To provide greater user comfort, a counter weighted mechanism reduces vibration for smoother operation and a redesigned front grip area provides best in class ergonomics.
Qty:
Part #:729-5262-21
- 1" SDS Plus Rotary Hammer Kit
Get up to 40% faster drilling and 15% more life, even in the toughest applications. Designed for the toughest applications, the 1&rdquo SDS-Plus D-Handle Rotary Hammer lasts longer and drills faster than other tools in its class. With a powerful 8-amp motor, it delivers 0-1,620 RPM, 0-5,860 BPM and 2.1 ft-lbs of torque. You&rsquoll get superior drilling speed without sacrificing the power needed to drill larger holes. At just 6.1 pounds, this rotary hammer is easy to use and helps avoid user fatigue. A mechanical clutch protects the motor when the bit binds, and three-mode operation offers maximum versatility. The kit includes a side handle, depth rod and carrying case.
Qty:
Part #:729-2715-22
- M18 FUEL&trade 1-1/8" SDS Plus Rotary Hammer Kit (Discontinued, Replaced by 2915-20)
Powered by FUEL&trade technology, the M18 FUELTM 1-1/8&rdquo SDS Plus Rotary Hammer delivers faster than corded speed, corded durability, and all day work on one charge. The Milwaukee POWERSTATE&trade Brushless Motor Provides 3.3 ft-lbs of impact energy, 0-1,350 RPM, and 0-5,000 BPM. The Milwaukee REDLITHIUM&trade XC5.0 Battery Packs provide all day work on one charge, 20% more power, and 2X more life than standard Lithium-Ion batteries. REDLINK PLUS&trade Intelligence integrates full-circle communication between tool, battery, and charger to protect from overloading, overheating, and over-discharging.
Qty:
Part #:507217
- COO China:
Qty:
Part #:729-5268-21
- Business Unit Tools. Product Level 1 Tools Corded. Product Level 2 Tools Hammers. Product Level 3 TOL SDS Plus. Product Level 4 TOL SDS Plus Hammers. AX Item Number 526821. Country of Origin CHN. Harmonized Tariff 8467290080.:
Qty:
Part #:729-2822-20
- M18 FUEL&trade SAWZALL® Recip Saw w/ ONE-KEY&trade (Tool-Only)'
Our M18 FUEL&trade SAWZALL® Recip Saw is the next generation of legendary performance and durability, designed for the toughest jobsite applications. The M18 FUEL&trade SAWZALL® is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE&trade Brushless Motor to provide you with 3,000 SPM and a 1-1/4" stroke length for faster material removal. REDLINK&trade PLUS electronics ensure maximum performance under stress in addition to protection from overloading, overheating, and over-discharging. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack (not included) delivers you up to 2.5X runtime and provides more work per charge and more work over the life of the pack than competitive batteries. This MILWAUKEE® M18 FUEL&trade SAWZALL® is designed to perform in the most demanding applications and is our most durable cordless reciprocating saw yet. A wear-resistant blade change, anti-corrosion blade clamp, and metal reinforced battery rails provide longer component life and stand up to the toughest jobsite conditions. The M18 FUEL&trade SAWZALL® Recip Saw weighs less than the previous generation and features an adjustable shoe, integrated LED light, and a hanging hook for convenient storage on the job. Compatible with ONE-KEY&trade, this reciprocating saw wirelessly connects to a smartphone to customize, track, and manage the tool&rsquos performance and location. Tool customization allows you to connect and control settings such as output speed and trigger ramp up for smoother cut starts. A selectable Cut-Brake feature automatically stops the blade from reciprocating at the end of a cut, reducing the risk of damaging sensitive materials near the cut in most applications. The tool&rsquos memory supports up to 3 custom profiles that can be easily accessed with the touch of a button on the tool. Integrated tool tracking, also available through ONE-KEY&trade, provides you with full visibility to how and where tools are being used across your network of jobs and users.
Qty:
Part #:271822
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Hammers. Product Level 3 TOL SDS Max. Product Level 4 TOL SDS Max/Spline Hammers. Product Level 5 TOL FUEL ONE-KEY. AX Item Number 271822HD. Country of Origin CHN. Harmonized Tariff 8467290080.:
Qty:
Qty:
Part #:834-626731000
- Cutting extraction hood CED 125 Plus (626731000)
Extraction hood with plunge function and optimized flow channel for particularly low-dust cutting both indoors and outdoors
Compact construction form table can be removed without tools for more flexibility when working close to walls and improved visibility for freehand cuts
Cutting depth adjustable without tools max. cutting depth for freehand cuts 27 mm, with table 25 mm, with guide rail 20 mm
Robust sheet metal table for tilt-proof operation. Connection for dust extraction Ø 35/41 mm
Anti-static plastic prevents electric charging and dust accumulations for a constantly high suction power
Large, colored operating elements for simple, tool-free adjustment, even when wearing gloves
Sheet metal table with guide rollers for easy, precise feed. Protect delicate surfaces from scratches.
Enables the use of a Metabo precision guide rail for making cuts with great precision
Scope of delivery incl. two hole nut 5/8" and M 14.
Cordless Angle Grinder Suitable for W..18 LT BL 11-125, W..18 LTX BL 15-125 Quick
Plug-in Angle Grinder Suitable for all Metabo angle grinders with a diameter of 125mm, except for W 650, W 750, W.. 850, WQ 1000, W 1100, W 1150, WP 1200-125 RT, WEV 1500-125 RT, WE 1500-125 RT
Qty:
Displaying: 1 - 24 of 24 Matching Items