Columbus McKinnon (C-M)
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Columbus McKinnon (C-M) Ingersol Rand
$
326.00
Qty:
Part #:510283
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
446.00
Qty:
Part #:800373
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
Qty:
Part #:800375
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,707.91
Qty:
Part #:800374
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,306.00
Qty:
Part #:841-383-116K
- Air Hammer Kit, Standard Duty, 2 5/8 in Stroke L, 3,500 blows/min, w/5 Chisels
Ingersoll-Rand Air HammersProduct DetailsAccurate and easily controlled tease throttleStandard beehive retainer - allows use of a wide variety of accessoriesModel 772 - Unitized "easy-out" throttle valve assemblyFurnished with two retainers for use with a wide variety of accessoriesIncludes(5) Chisels
Qty:
Part #:510696
- 2145QiMAX 2155QiMAX Series Impact Wrench
The Ingersoll Rand 2145QiMAX 3/4" Impact Wrench delivers incredible performance and industrial-grade durability in an impact wrench. Plus, its efficient air motor reduces air consumption to save you money. Perfect for the most demanding applications, such as truck and bus service, construction and agricultural equipment maintenance, as well as the MRO market.
$
651.52
Qty:
Part #:510697
- The Ingersoll Rand 2155QiMAX 1" Impact Wrench delivers incredible performance and industrial-grade durability in an impact wrench. Plus, its efficient air motor reduces air consumption to save you money. Perfect for the most demanding applications, such as truck and bus service, construction and agricultural equipment maintenance, as well as the MRO market.
$
849.15
Qty:
Part #:841-383-2925RB2TI
- Product DetailsCompact size with high power outputPower regulator is fully adjustableContoured handleEasy-to-service
$
4,660.62
Qty:
Part #:801791
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
Qty:
Part #:802163
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
530.00
Qty:
Part #:801783
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
220.00
Qty:
Part #:801792
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
348.00
Qty:
Part #:510692
- 231 Series Impact Wrench
The heavy duty 231C impact wrench has the reliability and durability you&rsquove come to expect from the Ingersoll Rand name. The powerful tool provides an even impact and is durable enough to last through the toughest work environments.
Qty:
Part #:841-383-307B
- Ingersoll-Rand 301 Series Die Grinders 0.25 HPProduct DetailsIt can be used with all types of accessories for porting, weld breaking, and smoothing sharp edges, as well as deburring, polishing, and grindingSuperior maneuverabilitySafety lever prevents accidental startsFront exhaust helps keep work surface cleanVersatile and reliableEasy-to-use, integral safety-lock throttle lever prevents accidental start-upSmall and lightweight design provides easy operation greater access to tight spotsStrong aluminum housing withstands tough operating conditionsTool comes with both a 1/4 in and 6mm collets and two wrenchesIncludesTool1/4 in nd 6mm Collets
Qty:
Part #:841-383-1105MAX-D3
- 1105MAX Series Premium Mini Ratchet Wrench
The 1105MAX Series is our top-of-the-line, premium mini impact wrenches. These air ratchets offer best-in-class power and speed with features like enhanced corrosion resistance and an ultra-comfortable housing.
Increased Access & Reach These mini ratchet wrenches let you get into deep, tight, and hard-to-reach places.
Long-Lasting Comfort The composite housing and handle insulates from the cold and ensures operator comfort even during extended use.
Trusted Durability The 1105MAX Series can withstand harsh environments and repeated drops.
Qty:
Part #:841-383-2235QTIMAX
- Specifications Air Consumption [Nom] 6 CPM Brand INGERSOLL-RAND Control Type Trigger Country of Origin US Cycle Rate [Nom] 1,220 blows per minute Drive Size [Nom] 1/2 in Drive Type Square Free Speed [Nom] 8,500 rpm Handle Type Pistol Hazmat NO Hose Size [Nom] 3/8 in Inlet Size 1/4 in Length [Nom] 7.6 in MPI Catalog YES Noise Level [Max] 88.7 dB Rank Rank_E Retainer Type O-Rings Torque [Max] 1,300 ft lb; 900 ft lb (reverse) Torque [Min] 900 ft lb Wt. 4.7 lb :
Qty:
$
1,047.25
Qty:
Part #:841-175-2262
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
434.00
Qty:
$
1,441.75
Qty:
$
1,713.25
Qty:
$
1,962.50
Qty:
$
33.25
Qty:
Part #:841-175-4621
- Cyclone hand chain hoist. Most interchangeability of parts
in the industry
Standard Load Limiter for
simple, automatic overload
protection
Enclosed contoured Westontype
automatic brake for
positive load control
High-efficiency spur gearing for
greater lift with minimum effort
Rugged Hoistaloy chain for
added strength and durability
Fully machined, forged liftwheel
pockets for easier lifting and
smooth free chaining
High-strength aluminum alloy
castings in frame and covers
Inspected over 75 times to meet
or exceed HMI and ASME/ANSI
performance and safety
standards
Standard hand chain drop is 2
feet less than lift, (example 8
foot lift hoist has 6 foot hand
chain drop)
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,551.00
Qty:
Displaying: 1 - 24 of 49 Matching Items