J.H. Williams
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: J.H. Williams Malco True Temper Young Brothers
Part #:503696
- 1/4" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Qty:
Part #:503702
- 1/2" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:503703
- 5/8" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:506130
- 1/2" Drive Ratcheting Repair Kit For JHWS-52A& JHWS-53
&bull Double pawl design with 72 teeth action provides a 5° ratcheting angle
&bull Shift lever reverses action instantly
&bull Knurled handle provides a non-slip grip
&bull Chrome finish models provides increased protection from rust and corrosion
Qty:
Part #:504197
- 3/4" Drive Universal Joint 3-1/2"
Specially heat treated for impact use to provide long life, safety, and durability
Pin and o-ring or RET RING (sold separately) secure tools onto impact wrench for safety and convenience
Suitable for use with pneumatic and electric impact wrenches
Drive end features pin retention hole and groove
Qty:
Part #:503577
- 18" Heavy Duty Roll Bars
Aligning and prybar with long tapered body and 90 rolling head
Qty:
Part #:502580
- 1" Drive Adapter 1" Female x 3/4" Male 3"
&bull Specially heat treated for impact use to provide long life, safety, and durability
&bull Pin and o-ring or RET RING® (sold separately) secure tools onto impact wrench for safety and convenience
&bull Universal joint provides 55° range of motion
&bull Suitable for use with pneumatic and electric impact wrenches
&bull Drive end features pin retention hole and groove
Qty:
Part #:1184-JHW50668
- 23 pc 1/2" Drive -Point SAE Shallow and Deep Socket and Drive Tool Set Compact Case
&bull All tools are professional quality, made of high-grade chrome vanadium steel
&bull Sockets feature SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Packed in rugged compact high-density polyethylene (HDPE) cases that are strong and durable yet light in weight
Qty:
Qty:
Part #:507515
- 5 lb Wood Splitting Wedge #1132600
The wood splitting wedge is drop-forged steel that is used to split wood logs. This tool features square heads for striking and driving into logs. The 5-pound wedge is durable and painted black
Qty:
Part #:521260
- 10-inch x 10-inch Tamper with Hardwood Handle Tampers #1133700
This tamper is ideal for tamping asphalt, gravel, stone, and dirt. The high quality hardwood handle is flexible and durable. The heavy 10.6-pound steel head makes a great tool for heavy duty construction, industrial, and commercial applications.
Qty:
Part #:504983
- 71-in Post Hole Digging/ Tamper Bar #1160000
The Post Hole Digging Bar is used for digging and prying of dirt and large rocks and tamping soil. The tamper head is used to level ground around fence posts and deck supports. This tool has a durable design and is heat treated with quality carbon steel to withstand industrial use.
Qty:
Part #:504991
- 60-in Wedge Point Crow Bar Prying Bars #1160200The wedge point crow bar is 60-inch long straight heat treated carbon steel bar. This long handle is utilized to pry and move heavy objects with its wedge point. The typical uses for an 18-pound wedge point bar include breaking up clay, concrete, and other hard materials
Qty:
Part #:511972
- J-450, Pony Round Point Shovel with Solid Shank
The Jackson Professionals Tools round point shovel is the industry standard when it comes to digging. It is a commercial grade shovel featuring a solid shank blade. The overall construction is made to withstand repeated use in the toughest of conditions.
Features
Tough Solid Shank Blade
Strong Forward Turned-Step
Heavy-Duty Hardwood Handle
Enhanced Socket Design
Qty:
Part #:809645
- J-450, Pony Square Point Shovel with Solid Shank
The Jackson line is designed for consumers and professionals who expect high-quality features and durability. This sturdy square point shovel is perfect for moving loose garden material, sand, top soil or debris. It can also be used to shape beds, mix concrete, level off areas that need to be flat or to scrape stubborn material off driveways or other hard surfaces.
About This Product
The Jackson line is designed for consumers and professionals who expect high-quality features and durability. This sturdy square point shovel is perfect for moving loose garden material, sand, top soil or debris. It can also be used to shape beds, mix concrete, level off areas that need to be flat or to scrape stubborn material off driveways or other hard surfaces.
Length
3.5 in
Width
9.25 in
Height
58 in
Product #
1250300
Warranty
Ltd. Lifetime
UPC #
049206125032
Features
Tough Solid Shank Blade
Strong Forward Turned-Step
Heavy-Duty North American Hardwood Handle
Extended Blade Socket Design
Tough Solid Shank Blade
Strong Forward Turned-Step
Heavy-Duty North American Hardwood Handle
Extended Blade Socket Design
Tough Solid Shank Blade
Solid shank blade provides optimal strength while preventing soil buildup. Buy Online
Strong Forward Turned-Step
The forward-turned step provide secure foot placement for improved comfort and ease of use. Buy Online
Heavy-Duty Hardwood Handle
The heavy-duty hardwood handle on this shovel provides a comfortable grip and long lasting durability. Buy Online
Extended Blade Socket Design
The extended blade socket on this shovel creates a stronger connection between handle and blade. Buy Online
Tough Solid Shank Blade
Solid shank blade provides optimal strength while preventing soil buildup. Buy Online
Strong Forward Turned-Step
The forward-turned step provide secure foot placement for improved comfort and ease of use. Buy Online
Heavy-Duty Hardwood Handle
The heavy-duty hardwood handle on this shovel provides a comfortable grip and long lasting durability. Buy Online
Extended Blade Socket Design
The extended blade socket on this shovel creates a stronger connection between handle and blade. Buy Online
Other Jackson® Tools You May Like See All Long Handled Shovels
J-450, Pony Square Point Shovel with Solid Shank and Armor D-grip
1248800
See Product Details
J-450, Pony Round Point Shovel with Solid Shank
1201900
See Product Details
© 2022 The Ames Companies, Inc.
Contact Us
Tools
Wheelbarrows
Shovels & Scoops
Hammers & Sledges
Find The Right Wheelbarrow
About Jackson®
Why Choose Jackson®
Read About Our American Manufacturing
Sign Up for the latest News From Jackson® Professional Tools
Sign Up for the latest News From Jackson® Professional Tools
Visit Our Other Websites
Griffon Corporation
Careers@AMES
The AMES Companies
Privacy Policy
Terms of Use
Sitemap
Qty:
Part #:188-1603400
- This top of the line combo shovel is ideal for shoveling or pushing snow, thanks to its 18-inch combination blade. The nylon wear strip extends the life of the blade and prevents the gouging of decks and other surfaces. It also features an ergonomic handle and an oversized D-grip that easily accommodates a gloved hand.
Qty:
Part #:800126
- 24 Inch Poly Snow Pusher with D-Grip Snow Pushers #1603500
This pusher is ideal for clearing light to medium accumulations of snow. It is designed for easy use and fast snow removal. Clear driveways and walkways in just a few passes!
Qty:
Part #:801440
- 18 Inch Poly Combo Snow Shovel with D-Grip Snow Shovels #1627200This shovel blade is lightweight and ideal for both shoveling and pushing snow. Its steel wear strip extends the life of the blade and helps remove stubborn patches of snow and ice.
Qty:
Part #:503692
- 3/4" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:503881
-
Overview
&bull Set-up wedges are used for setting-up work on planers, shapers, milling machines and other similar applications
Qty:
Qty:
Part #:508193
- 10 pc 3/8" Drive 6-Point SAE Shallow Socket Set on Rail and Clips
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Qty:
Part #:517891
- 10 pc 3/8" Drive -Point SAE Bit Standard Hex Bit Socket Set on Rail and Clips
High-polished chrome finish socket cleans easily
Two piece design allows bits to be replaced easily
Qty:
Displaying: 25 - 48 of 659 Matching Items