General Tool
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: General Tool Jet
Part #:521217
- JAT-401, 1/4" Die Grinder
The JAT-401 1/4'' Die Grinder features a powerful motor and aluminum housing. Built with durability in mind, this tool will withstand the daily grind you need to get your job done.
Qty:
closeout
$41.00 MSRP
$
31.82
Qty:
Part #:804543
- Tap Wrench for No. 0 to 1/4 In. Taps
The #164 Tap Wrench for No. 0 to 1/4 In. Taps is designed to hold and turntaps&mdashtools that cut threads on the inner surface of a hole or pipe&mdashor other small tools, such as hand reamers and screw extractors.
Length 2-7/8 in.
Qty:
Part #:506847
- Product Description
The #377 Welding Magnet with 50 Lb. Pull eliminates the need for clamps or temporary fasteners.
Features
Holds steel plates at any of five angles
Specifications
Magnetic pull force 50 lb.
Holding angles 30°, 45°, 60°, 75°, 90°
- See more at https//www.generaltools.com/welding-magnet-with-50-lb-pull#sthash.iQYGXUbb.dpuf
Qty:
Part #:502753
- The #300/1 Industrial Precision 6 In. Flexible Steel Rule can make very precise measurements.
Features
Ultra-fine black graduations
Polished stainless steel finish
Pocket clip
Includes
Plastic sleeve
Dimensions
6 x 3-7/8 in.
Qty:
Part #:508787
-
JAT-800A Lever Lock Needle Scaler
The JAT-800A lever lock needle scaler brings efficiency to rust, weld slag, and paint removal. With its precision needle scattering, you won't just get the job done but get it done faster.
Qty:
Part #:805583
- JAT-301, 3/8" Ratchet
The JAT-301 aluminum ratchet will become an extension of your hand with a great combination of torque and speed added to unmatched durability, this tool will help you get your job done for years to come.
Qty:
Part #:504544
- JHJ-5, 5-Ton Hydraulic Bottle Jack
JET®JHJ Series Hydraulic Bottle Jacks have capacities from 2 to 100 tons, and are available in standard and low profile heights. The pump piston and ram are chrome plated for added corrosive resistance increasing durability. Each JHJ model functions in upright, angled or horizontal positions for increased versatility. JET JHJ Series Hydraulic Bottle Jacks comply with ANSI/ASME B30.1 and PALD-1 standards.
Qty:
Part #:800387
- Five-blade Screwdriver Set
The #S605 Five-blade Screwdriver Set includes slotted and crosspoint blades.
Qty:
Part #:510965
- Tungsten Carbide Point Scriber/Etching Pen with MagnetThe #88CM Tungsten Carbide Point Scriber/Etching Pen with Magnet can mark and scribe steel, ceramic and glass. The magnet can retrieve small ferrous and steel parts and chips from hard-to-reach places.
Point diameter 1/16 in. (1.6mm)
Qty:
Part #:508791
- JAT-104, 1/2" Impact Wrench
The Jet JAT-104 1/2'' Square Drive Impact Wrench doesn't just get the job done, it does it when others can't. With 900 ft.lbs. of torque, it's like picking up your 3/4" drive impact but without all the weight at just 6 lbs. This tool is great for general maintenance, vehicle repairs, and body shop work.
Qty:
Part #:508811
- JAT-105, 3/4" Impact Wrench
The Jet JAT-105 3/4'' Square Drive Impact Wrench delivers an amazing 1,500 ft.lbs. of torque and is unmatched in it's class. At only 11 lbs. it's the lightest in it's class to help you get your job done without carrying around all that weight. This tool is great for plant maintenance, truck repairs, and heavy equipment repair.
Qty:
Part #:504543
- JHJ-3, 3-Ton Hydraulic Bottle Jack
JET®JHJ Series Hydraulic Bottle Jacks have capacities from 2 to 100 tons, and are available in standard and low profile heights. The pump piston and ram are chrome plated for added corrosive resistance increasing durability. Each JHJ model functions in upright, angled or horizontal positions for increased versatility. JET JHJ Series Hydraulic Bottle Jacks comply with ANSI/ASME B30.1 and PALD-1 standards.
Qty:
Part #:504545
- JHJ-12-1/2, 12-1/2-Ton Hydraulic Bottle Jack
JET®JHJ Series Hydraulic Bottle Jacks have capacities from 2 to 100 tons, and are available in standard and low profile heights. The pump piston and ram are chrome plated for added corrosive resistance increasing durability. Each JHJ model functions in upright, angled or horizontal positions for increased versatility. JET JHJ Series Hydraulic Bottle Jacks comply with ANSI/ASME B30.1 and PALD-1 standards.
Qty:
Part #:510037
- JAT-302, 1/2" Ratchet
The JAT-302 aluminum ratchet will become an extension of your hand with a great combination of torque and speed added to unmatched durability, this tool will help you get your job done for years to come.
Qty:
Part #:512032
- Magnetic Pick Up Tool with Rigid Or Flexible Shaft Extends From 18-inches to 32-Inched, 2lb Pull Capacity Grabber/Retrieving Magnet
Ideal for retrieving steel and iron parts from hard-to-reach and see work areas, the General Tools 384N Flexible Telescoping Magnetic Pick-Up is a great combination tool for retrieving lost items from confined areas. Equipped with a powerful 2 lb. pull Neodymium magnet the shaft can be either rigid or flexible by simply unscrewing the handle and removing the steel shaft. Without the shaft, the pick can easily snake around objects to retrieve lost items. The shaft can extend from 18" (457mm) to 32" (813mm).
Qty:
Part #:807557
- ANGLE-IZER® Contour Gauge, Profile Gauge, Shape Duplicator, 10-Inch
PRECISE SHAPE DUPLICATION- Easily copy any shape or duplicate a profile exactly for woodworking or tile flooring/linoleum installation where you want to replicate the shape of moldings or match cut outs around door casings and pipe
PERFECT PROFILES- 3" (76mm) deep fingers will measure profiles up to 1-1/4" (32mm) precisely record the cross-sectional shape of a surface
EXTRA LENGTH- 10&rdquo gauge is ideal for woodworking, linoleum installation, ceramic tile installation or any job where contour duplication is essential
Qty:
Part #:507204
- Product Description
The #SPC75 4 In. Drive Pin Punches, Eight-piece Set is ideal for removing metal pins from holes in machine shops and motor service bays.
Features
Made of hardened, tempered and heat-treated tool steel
Ground square ends
Knurled finger grips
Qty:
Part #:808000
- 6 In. Carbon Fiber Digital CaliperThe #146 6 In. Carbon Fiber Digital Caliper can make inside, outside, depth and step measurements in inches or millimeters.
Qty:
Part #:804527
- Drill Bit Gauge, 1/16&rdquo to ½&rdquo By 64ths Fractional Size With Decimal Equivalents, Stainless Steel
The 14 Drill Gauge helps to quickly and conveniently determine the size of a fractional drill bit. The durable, stainless steel gauge measures drill bits from 1/16 in. to ½ in. by 64ths. The sizes are all permanently etched into the gauge and also show the criminal equivalents. The gauge&rsquos size is 6-1/2 x 2-1/2 inches wide.
6-1/2 x 2-1/2 in.Accuracy ±1/64 in
Qty:
Part #:804511
- Product Description
The #818 Scratch Awl is ideal for scribing and layout work, starting screw holes and piercing soft materials.
Blade length 2-3/4 in.
Overall length 6-1/2 in.
Qty:
Part #:804517
- Drill Bit Grinding AttachmentThe #825 Drill Bit Grinding Attachment can hone drill bits to their original sharpness, extending their life and improving drilling accuracy.
Works with 1/8 to 3/4 in., #1 to #30, A to Z, and 3 to 19mm drill bits
Qty:
Part #:800083
- 24 in. Lighted Mechanical PickupThe #70396 24 In. Lighted Mechanical Pickup is ideal for retrieving items from dark or hard-to-reach places.
Qty:
Displaying: 1 - 24 of 79 Matching Items