Milwaukee Tools
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Milwaukee Tools
- Power Tools: Bandsaw Hex Impact Driver Sprayer Thread Rod Cutter
closeout
$520.00 MSRP
$
341.70
Part #:505377
- CLOSEOUTS Only 1 Left!
- Portable Band Saw
Milwaukee's Band Saws are the choice of professionals. With high torque and powerful motor this band saw will maintain a steady, optimum blade speed. The excellent balance, high visibility and quick blade change system make this band saw easy to work with. Using an all ball and roller bearing construction, and worm gear and chain drive mechanism this tool is built to last. A self-lubricating system is used for maximum wear resistance and long life. No oiling is needed.
Qty:
Part #:729-2657-20
- M18&trade 2-Speed 1/4" Hex Impact Driver (Tool Only)
The M18&trade Cordless 2-Speed 1/4" Hex Impact Driver is the most powerful 1/4" hex compact impact driver in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-Pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs of fastening torque for class-leading performance. This is the only tool in its class to offer multiple speed/torque modes through proprietary 2-Mode Drive Control&trade. REDLINK&trade Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18&trade Cordless 1/4" Hex Impact Driver features an LED Light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Qty:
Part #:729-2729-20
- M18 FUEL&trade Deep Cut Band Saw (Tool Only)
The M18 FUEL&trade Band Saw cuts faster than its corded counterparts, provides the same legendary durability of a Milwaukee corded band saw and delivers up to 2X more run time than other cordless options. Utilizing a POWERSTATE&trade Brushless motor and Constant Power Technology&trade, the M18 FUEL&trade Deep Cut Band Saw cuts faster than corded band saws. It also delivers the same legendary durability that has made Milwaukee Corded Deep Cut Band Saws second to none for decades by utilizing over 90% of the same parts. Equipped with Jobsite Armor Technology&trade, the tool is better protected from drops and debris with a proprietary composite material and crush zone barriers to absorb impacts. REDLITHIUM&trade XC5.0 Battery Technology provides up to 2.5X more run-time through superior pack construction, electronics, and more work per charge over the life of the battery than any competitive lithium-ion battery on the market. REDLINK PLUS&trade Intelligence has the most advanced system of cordless power tool electronics, providing optimized performance, electronic clutch, and overload protection using total system communication between tool, battery and charger.The M18 FUEL&trade Deep Cut Band Saw features a tool-free locking adjustable shoe that can adjust from an extended shoe to no shoe in seconds. Other innovative features include a hang hook for easy storage in-between cuts, LED light to illuminate the cutting area, superior cut visibility, and a balanced body design that allows the tool to rest naturally and comfortably in the user&rsquos hands.
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2893-22CX
- M18 Brushless 2-Tool Combo Kit, Hammer Drill/Impact Driver
Our M18&trade Brushless 2-Tool Combo Kit (2893-22CX) offers the best in class drilling and fastening solutions. The 1/2" Hammer Drill (2902-20) and 1/4" Hex Impact Driver (2850-20) feature the M18&trade cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The Brushless 1/2in. Hammer Drill is the most powerful drill in its class, delivering 725 in.-lbs. of torque. The 1/4 in. Hex Impact Driver has the fastest application speed in its class and delivers 1,600 in.-lbs. of torque. Both of our compact tools feature MILWAUKEE® brushless motors optimized specifically for the tool. Built-in REDLINK&trade electronics enhances the performance of the M18&trade REDLITHIUM&trade batteries, providing more efficient power delivery and fewer trips to the charger. This combo kit includes our M18&trade 1/2" Hammer Drill, M18&trade 1/4" Hex Impact Driver, (1) M18&trade REDLITHIUM XC4.0 Battery Pack, (1) M18&trade REDLITHIUM CP2.0 Battery Pack, M18&trade/M12&trade Multi-Voltage Charger, (2 )belt clips, Side Handle, and Contractor Bag.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Part #:729-2820-20PS
- M18&trade SWITCH TANK&trade 4-Gallon Backpack Sprayer (Tool Only)
Our M18&trade SWITCH TANK&trade 4-Gallon Backpack Sprayer delivers the industry&rsquos first interchangeable tank design with no manual pumping. Designed to meet the needs of professional landscape maintenance, the battery-powered backpack sprayer provides you with instant, constant and adjustable pressure up to 120 PSI and a 25 ft spray distance. The 5-mode pressure adjustment knob adjusts the pressure between 20 &ndash 120 PSI, giving you the capability to complete a wide range of applications. Our M18&trade REDLITHIUM&trade XC3.0 Battery (sold seperately) provides you with up to 12 tanks of spraying per charge. The 4-Gallon Sprayer Tank Assembly features a dual diaphragm pump for longer pump life and Viton® seals for increased durability against harsh chemicals. The sprayer tank has a wide mouth opening for easier pouring and a strainer that filters debris from getting into the tank. The backpack frame includes wide straps giving you added comfort during extended spraying applications and a handle for convenient transport and storage. The 4-Gallon Sprayer is made up of two components &ndash the M18&trade SWITCH TANK&trade Powered Base and the SWITCH TANK&trade 4-Gallon Sprayer Tank Assembly. The Powered Base includes the motor, battery compartment, and REDLINK&trade electronics, while the interchangeable Tank Assembly includes the pump, hose, and wand. The isolated pump, hose, and wand design allows you to add on tank assemblies for different spraying applications, eliminating cross-chemical contamination. It also provides you with the ability to replace the tank assembly at a lower cost of ownership compared to replacing the entire sprayer. The Powered Base is also compatible with the SWITCH TANK&trade 4-Gallon Concrete Sprayer (49-16-28CS) and 4-Gallon Water Supply (49-16-28WS) Tank Assemblies. Our M18&trade SWITCH TANK&trade 4-Gallon Backpack Sprayer is part of the M18&trade system which is fully compatible with over 175 tools.
Qty:
Qty:
Part #:729-2656-20
- M18&trade 1/4" Hex Impact Driver (Tool Only)
The M18&trade Cordless 1/4" Hex Impact Driver is the most powerful 1/4" hex compact impact driver in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-Pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs of fastening torque for class-leading performance. REDLINK&trade Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18&trade Cordless 1/4" Hex Impact Driver features an LED Light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Qty:
Part #:729-2760-20
- M18 FUEL&trade SURGE&trade 1/4" Hex Hydraulic Driver (Tool Only)
The M18 FUEL&trade SURGE&trade 1/4" Hex Hydraulic Driver is the quietest cordless fastening solution on the market. With Milwaukee's new FLUID-DRIVE&trade Hydraulic Powertrain, users will experience up to 50% quieter operation, 3X less vibration for smoother operation, and faster driving speeds compared to standard impacts. The POWERSTATE&trade Brushless Motor delivers up to 0-3,000 RPM with constant power output to drive screws faster. REDLINK PLUS&tradeIntelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM&trade Compact Batteries or Extended Capacity Batteries (sold separately), which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-Mode DRIVE CONTROL&tradeprovides greater control over output speed and power for greater versatility. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
Qty:
Part #:729-2820-21PS
- M18&trade SWITCH TANK&trade 4-Gallon Backpack Sprayer Kit
Our M18&trade SWITCH TANK&trade 4-Gallon Backpack Sprayer kit delivers the industry&rsquos first interchangeable tank design with no manual pumping. Designed to meet the needs of professional landscape maintenance, the battery-powered backpack sprayer provides you with instant, constant and adjustable pressure up to 120 PSI and a 25 ft spray distance. The 5-mode pressure adjustment knob adjusts the pressure between 20 &ndash 120 PSI, giving you the capability to complete a wide range of applications. Our M18&trade REDLITHIUM&trade XC3.0 Battery provides you with up to 12 tanks of spraying per charge. The 4-Gallon Sprayer Tank Assembly features a dual diaphragm pump for longer pump life and Viton® seals for increased durability against harsh chemicals. The sprayer tank has a wide mouth opening for easier pouring and a strainer that filters debris from getting into the tank. The backpack frame includes wide straps giving you added comfort during extended spraying applications and a handle for convenient transport and storage. The 4-Gallon Sprayer is made up of two components &ndash the M18&trade SWITCH TANK&trade Powered Base and the SWITCH TANK&trade 4-Gallon Sprayer Tank Assembly. The Powered Base includes the motor, battery compartment, and REDLINK&trade electronics, while the interchangeable Tank Assembly includes the pump, hose, and wand. The isolated pump, hose, and wand design allows you to add on tank assemblies for different spraying applications, eliminating cross-chemical contamination. It also provides you with the ability to replace the tank assembly at a lower cost of ownership compared to replacing the entire sprayer. The Powered Base is also compatible with the SWITCH TANK&trade 4-Gallon Concrete Sprayer (49-16-28CS) and 4-Gallon Water Supply (49-16-28WS) Tank Assemblies. Our M18&trade SWITCH TANK&trade 4-Gallon Backpack Sprayer is part of the M18&trade system which is fully compatible with over 175 tools. In addition to the backpack sprayer, the kit includes one M18&trade REDLITHIUM&trade XC3.0 Battery and an M18&trade/M12&trade Multi-Voltage Charger.
Qty:
Part #:729-2893-22
- M18 Brushless 2-Tool Combo Kit, Hammer Drill/ 3-Speed Impact Driver
Our M18&trade Brushless 2-Tool Combo Kit (2893-22) offers the best in class drilling and fastening solutions. The 1/2" Brushless Hammer Drill (2902-20) and 1/4" Hex Brushless 3 Speed Impact Driver (2851-20) feature the M18&trade cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The brushless 1/2" Hammer Drill is the most powerful drill in its class, delivering 725 in.-lbs. of torque. The 1/4" Hex 3 Speed Impact Driver has the fastest application speed in its class and delivers 1,600 in.-lbs. of torque. Both of our compact tools feature MILWAUKEE® brushless motors optimized specifically for the tool. Built-in REDLINK&trade electronics enhances the performance of the M18&trade REDLITHIUM&trade batteries, providing more efficient power delivery and fewer trips to the charger. This combo kit includes our M18 Brushless 1/2" Hammer Drill, M18&trade Brushless 1/4" Hex Impact Driver, (2) M18&trade REDLITHIUM&trade XC4.0 Batteries, a M18&trade/M12&trade Multi-Voltage Charger, Side Handle, (2) Belt Clips and a Contractor Bag
Qty:
Part #:729-2529-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Metal Working. Product Level 3 TOL Band Saws. Product Level 4 TOL FUEL. Product Level 5 TOL FUEL. AX Item Number 252920. Country of Origin CHN. Harmonized Tariff 8467220090.:
Qty:
Part #:729-3453-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Impact Drivers. Product Level 4 TOL Brushless. Product Level 5 TOL FUEL. AX Item Number 345320. Country of Origin CHN. Harmonized Tariff 8467290040.:
Qty:
Part #:729-2953-22
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Impact Drivers. Product Level 4 TOL 2 Batt. Product Level 5 TOL FUEL. AX Item Number 295322. Country of Origin VNM. Harmonized Tariff 8467290040.:
Qty:
Displaying: 1 - 15 of 15 Matching Items