Milwaukee Tools
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Milwaukee Tools
- Power Tools: Hex Impact Driver Shear
Part #:729-2657-20
- M18&trade 2-Speed 1/4" Hex Impact Driver (Tool Only)
The M18&trade Cordless 2-Speed 1/4" Hex Impact Driver is the most powerful 1/4" hex compact impact driver in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-Pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs of fastening torque for class-leading performance. This is the only tool in its class to offer multiple speed/torque modes through proprietary 2-Mode Drive Control&trade. REDLINK&trade Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18&trade Cordless 1/4" Hex Impact Driver features an LED Light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Qty:
Part #:506312
- 18 Gauge Shear
This new shear comes with a powerful 6.8 amp Milwaukee built motor. The ergonomic tactile grip is designed for more user comfort allowing you to make that straight cut when needed. The new lightweight, heavy-duty magnesium gear-case has been incorporated in the design for superior balance. The variable speed trigger (0-2500SPM) allows for smoother acceleration and performance when needed.
Qty:
Part #:729-2635-20
- M18&trade Cordless 18 Gauge Double Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2636-20
- M18&trade 14 Gauge Double Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2637-20
- M18&trade 18 Gauge Single Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2893-22CX
- M18 Brushless 2-Tool Combo Kit, Hammer Drill/Impact Driver
Our M18&trade Brushless 2-Tool Combo Kit (2893-22CX) offers the best in class drilling and fastening solutions. The 1/2" Hammer Drill (2902-20) and 1/4" Hex Impact Driver (2850-20) feature the M18&trade cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The Brushless 1/2in. Hammer Drill is the most powerful drill in its class, delivering 725 in.-lbs. of torque. The 1/4 in. Hex Impact Driver has the fastest application speed in its class and delivers 1,600 in.-lbs. of torque. Both of our compact tools feature MILWAUKEE® brushless motors optimized specifically for the tool. Built-in REDLINK&trade electronics enhances the performance of the M18&trade REDLITHIUM&trade batteries, providing more efficient power delivery and fewer trips to the charger. This combo kit includes our M18&trade 1/2" Hammer Drill, M18&trade 1/4" Hex Impact Driver, (1) M18&trade REDLITHIUM XC4.0 Battery Pack, (1) M18&trade REDLITHIUM CP2.0 Battery Pack, M18&trade/M12&trade Multi-Voltage Charger, (2 )belt clips, Side Handle, and Contractor Bag.
Qty:
Part #:729-2470-21
- M12&trade Plastic Pipe Shear Kit
Our M12&trade Plastic Pipe Shear Kit with the powerful M12&trade 12-Volt Lithium-Ion battery included can slice through 2 inch schedule 80 PVC in just 3 seconds. The pipe shear kit is compatible with M12&trade lithium-ion batteries, giving you more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact and water and rust resistant. The ultra- sharp M12&trade plastic pipe shear with pierce point makes burr-free cuts, allowing you to cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade for maximum efficiency on repetitive cuts. The MILWAUKEE® plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time provide you with superior versatility and productivity. In addition to the pipe shear, this kit includes one M12&trade REDLITHIUM&trade CP1.5 battery pack, an M12&trade Lithium-Ion battery charger, and a carrying case.
Qty:
Part #:729-2656-20
- M18&trade 1/4" Hex Impact Driver (Tool Only)
The M18&trade Cordless 1/4" Hex Impact Driver is the most powerful 1/4" hex compact impact driver in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-Pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,750 RPM, 3,450 IPM and 1,500 in-lbs of fastening torque for class-leading performance. REDLINK&trade Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18&trade Cordless 1/4" Hex Impact Driver features an LED Light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Qty:
Part #:729-2760-20
- M18 FUEL&trade SURGE&trade 1/4" Hex Hydraulic Driver (Tool Only)
The M18 FUEL&trade SURGE&trade 1/4" Hex Hydraulic Driver is the quietest cordless fastening solution on the market. With Milwaukee's new FLUID-DRIVE&trade Hydraulic Powertrain, users will experience up to 50% quieter operation, 3X less vibration for smoother operation, and faster driving speeds compared to standard impacts. The POWERSTATE&trade Brushless Motor delivers up to 0-3,000 RPM with constant power output to drive screws faster. REDLINK PLUS&tradeIntelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM&trade Compact Batteries or Extended Capacity Batteries (sold separately), which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-Mode DRIVE CONTROL&tradeprovides greater control over output speed and power for greater versatility. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
Qty:
Part #:729-2893-22
- M18 Brushless 2-Tool Combo Kit, Hammer Drill/ 3-Speed Impact Driver
Our M18&trade Brushless 2-Tool Combo Kit (2893-22) offers the best in class drilling and fastening solutions. The 1/2" Brushless Hammer Drill (2902-20) and 1/4" Hex Brushless 3 Speed Impact Driver (2851-20) feature the M18&trade cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The brushless 1/2" Hammer Drill is the most powerful drill in its class, delivering 725 in.-lbs. of torque. The 1/4" Hex 3 Speed Impact Driver has the fastest application speed in its class and delivers 1,600 in.-lbs. of torque. Both of our compact tools feature MILWAUKEE® brushless motors optimized specifically for the tool. Built-in REDLINK&trade electronics enhances the performance of the M18&trade REDLITHIUM&trade batteries, providing more efficient power delivery and fewer trips to the charger. This combo kit includes our M18 Brushless 1/2" Hammer Drill, M18&trade Brushless 1/4" Hex Impact Driver, (2) M18&trade REDLITHIUM&trade XC4.0 Batteries, a M18&trade/M12&trade Multi-Voltage Charger, Side Handle, (2) Belt Clips and a Contractor Bag
Qty:
Part #:729-3453-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Drilling & Driving. Product Level 3 TOL Impact Drivers. Product Level 4 TOL Brushless. Product Level 5 TOL FUEL. AX Item Number 345320. Country of Origin CHN. Harmonized Tariff 8467290040.:
Qty:
Displaying: 1 - 11 of 11 Matching Items