NiCd Battery
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: NiCd Battery Press Tool Replacement Parts Site Light Thread Rod Cutter
Part #:729-2145-20
- M18&trade RADIUS&trade Compact Site Light
MOST VERSATILE LIGHT ON SITE - The M18&trade RADIUS&trade Compact Site Light is the World&rsquos first high output cordless site light on the market, and has the ability to provide light in task, area, and overhead applications. With 4,400 lumens of TRUEVIEW&trade High Definition output, the M18&trade Radius&trade LED Compact Site Light provides enough light to illuminate large work areas, and can be turned down to as low as 1,000 lumens for working in confined areas. A high impact polycarbonate lens, and IP54 ingress protection allows it to live in the toughest conditions. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.
Qty:
closeout
$126.00 MSRP
$
90.00
Part #:505751
- CLOSEOUTS Only 1 Left!
- 14.4V Battery
Choose the best power source for all of your 14.4-Volt Milwaukee cordless tools. With 2.4 amp-hour capacity, the 14.4-volt battery provides power for longer runtimes, so you have less interruption on the job. There&rsquos no memory effect, so the full NiCd battery capacity is always available. The reversible battery pack lets you work in tight spaces, and adjust the balance of the tools for greater comfort and productivity. Use this battery for longlasting, dependable performance with all of your Milwaukee 14.4-volt cordless tools.
Qty:
Part #:834-630705000
- Inner support flange for angle grinders (630705000)
For all angle grinders with M 14-spindle thread
Qty:
Part #:834-630706000
- Flange nut M 14 (630706000)
For all angle grinders with M 14-spindle thread
Qty:
closeout
$
69.00
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Part #:810060
- For Use With Mfr. Model Number 600398420, 600407420, 600408420, 600410420, 600418420, 600428420, 600432420, 600464420, 600465420, 600468420, 600476420, 600488420, 600507420, 600548420, 600552420, 600562420, 600572420
$
8.27
Qty:
$
11.07
Qty:
Part #:834-341101480
- For Use With Mfr. Model Number 600160420, 600259420, 600263420, 600280420, 600286420, 600290420, 600292420, 600354420, 600376420, 600388420, 600408420, 600465420, 600562420, 600572420, 600680420, 600683420, 601451420, 601452420, 602131420, 606111420, 606204420, 606205420, 606696420, 606701420, 606702420, 606711420, 606721420, 606722420, 606724420
$
8.27
Qty:
Part #:729-2473-20
- M12&trade FORCE LOGIC&trade Press Tool
Our M12&trade FORCE LOGIC&trade Press Tool Kit is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2473-22
- M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws
Our M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2773-20L
- Country of Origin DEU:
Qty:
Part #:834-626731000
- Cutting extraction hood CED 125 Plus (626731000)
Extraction hood with plunge function and optimized flow channel for particularly low-dust cutting both indoors and outdoors
Compact construction form table can be removed without tools for more flexibility when working close to walls and improved visibility for freehand cuts
Cutting depth adjustable without tools max. cutting depth for freehand cuts 27 mm, with table 25 mm, with guide rail 20 mm
Robust sheet metal table for tilt-proof operation. Connection for dust extraction Ø 35/41 mm
Anti-static plastic prevents electric charging and dust accumulations for a constantly high suction power
Large, colored operating elements for simple, tool-free adjustment, even when wearing gloves
Sheet metal table with guide rollers for easy, precise feed. Protect delicate surfaces from scratches.
Enables the use of a Metabo precision guide rail for making cuts with great precision
Scope of delivery incl. two hole nut 5/8" and M 14.
Cordless Angle Grinder Suitable for W..18 LT BL 11-125, W..18 LTX BL 15-125 Quick
Plug-in Angle Grinder Suitable for all Metabo angle grinders with a diameter of 125mm, except for W 650, W 750, W.. 850, WQ 1000, W 1100, W 1150, WP 1200-125 RT, WEV 1500-125 RT, WE 1500-125 RT
Qty:
Displaying: 1 - 16 of 16 Matching Items