Press Tool
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Power Tools: Press Tool Shear Thread Rod Cutter Torque Wrench
- Power Source: Cordless
Part #:805467
- M18 FUEL&trade 1/2" High Torque Impact Wrench w/ Friction Ring
Our M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE&trade Brushless Motor delivers up to 1,200 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with our M18&trade REDLITHIUM&trade FORGE&trade Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. Our patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL&trade offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF&trade control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers our users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½&rdquo Friction Ring design allows for quick & tool-free socket changes.
Qty:
Part #:276722
- M18 FUEL&trade High Torque ½&rdquo Impact Wrench with Friction Ring Kit (Replaces 2767-22 & 2767-22R)
Our M18 FUEL&trade 1/2" High Torque Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, our users will be able to get the job done faster and be more productive throughout their day. By providing the industry&rsquos most compact cordless High Torque Impact Wrench at 8.39&rdquo in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL&trade with Bolt Removal mode gives our users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. Our tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives our users ultimate comfort during prolonged use while lasting longer against corrosive materials. Our M18 REDLITHIUM&trade XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.
Qty:
Part #:729-2635-20
- M18&trade Cordless 18 Gauge Double Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2636-20
- M18&trade 14 Gauge Double Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2637-20
- M18&trade 18 Gauge Single Cut Shear (Tool Only)
With the introduction of the New M18&trade Cordless Shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximizes control during use. Also adding the industry&rsquos only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® Cordless Shears are changing the way tradesmen work on the jobsite today.
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Part #:729-2470-21
- M12&trade Plastic Pipe Shear Kit
Our M12&trade Plastic Pipe Shear Kit with the powerful M12&trade 12-Volt Lithium-Ion battery included can slice through 2 inch schedule 80 PVC in just 3 seconds. The pipe shear kit is compatible with M12&trade lithium-ion batteries, giving you more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact and water and rust resistant. The ultra- sharp M12&trade plastic pipe shear with pierce point makes burr-free cuts, allowing you to cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade for maximum efficiency on repetitive cuts. The MILWAUKEE® plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time provide you with superior versatility and productivity. In addition to the pipe shear, this kit includes one M12&trade REDLITHIUM&trade CP1.5 battery pack, an M12&trade Lithium-Ion battery charger, and a carrying case.
Qty:
Part #:729-2473-20
- M12&trade FORCE LOGIC&trade Press Tool
Our M12&trade FORCE LOGIC&trade Press Tool Kit is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2473-22
- M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws
Our M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2773-20L
- Country of Origin DEU:
Qty:
Displaying: 1 - 11 of 11 Matching Items