Columbus McKinnon (C-M)
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Columbus McKinnon (C-M) Starrett Wal-Board
$
326.00
Qty:
Part #:510283
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
446.00
Qty:
Part #:800373
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
Qty:
Part #:800375
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,707.91
Qty:
Part #:800374
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,306.00
Qty:
Part #:513002
-
The Wal-Board 2 in. Putty Knife w/ Plastic Handle PK-2 features
High carbon steel blades uniformly tapered for proper flex
High impact, molded plastic handle
$
5.97
Qty:
Part #:801791
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
Qty:
Part #:802163
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
530.00
Qty:
Part #:841-681-36080
- L.S. Starrett Angle MetersProduct DetailsMagnetic base frees hands when used on ferrous surfacesMeasures any angle for pitch or slopeHandy rise, run, angle, and pitch information on back of toolLarge, readable scale for accurate readings from 0-90° in any quadrant
Qty:
Part #:801783
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
220.00
Qty:
Part #:801792
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
348.00
Qty:
Part #:841-681-52586
- Product DetailsWell proportioned, hardened, properly tempered, and have a knurled grip for ease of handlingSpecial tempering makes head less likely to fracture from hard, off-center blowIncludesRound Wood Box
$
91.12
Qty:
Part #:513311
- Product details
This Walboard tool 08-001/AC31 Drywall Circle Cutter rips into solid wood, plywood, particle board, chipboard and other heavy-duty materials. The calibrated steel shaft enables you to make slashes that are up to 16" in diameter. This adjustable circle cutter is long lasting and has a heat-treated scoring blade for sharper incisions. The versatile screw knob assures that your construction projects will have precise and clean lines.
Walboard Tool 08-001/AC31 Drywall Circle Cutter
Calibrated steel shaft enables cuts up to 16" in diameter
Adjustable screw knob assures precise, clean cuts
Long-lasting heat-treated scoring blade for sharper cuts
Carded wood circle cutter
$
9.14
Qty:
$
5.18
Qty:
$
1,047.25
Qty:
Part #:841-175-2262
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
434.00
Qty:
$
1,441.75
Qty:
$
1,713.25
Qty:
$
1,962.50
Qty:
$
33.25
Qty:
Part #:841-175-4621
- Cyclone hand chain hoist. Most interchangeability of parts
in the industry
Standard Load Limiter for
simple, automatic overload
protection
Enclosed contoured Westontype
automatic brake for
positive load control
High-efficiency spur gearing for
greater lift with minimum effort
Rugged Hoistaloy chain for
added strength and durability
Fully machined, forged liftwheel
pockets for easier lifting and
smooth free chaining
High-strength aluminum alloy
castings in frame and covers
Inspected over 75 times to meet
or exceed HMI and ASME/ANSI
performance and safety
standards
Standard hand chain drop is 2
feet less than lift, (example 8
foot lift hoist has 6 foot hand
chain drop)
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,551.00
Qty:
Part #:841-175-2214A
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
899.99
Qty:
Part #:841-175-2234A
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
1,882.00
Qty:
Part #:841-175-5624A
- The CM Hurricane 360 is unlike any other hand chain
hoist on the market today. Featuring a one-of-a-kind hand
chain cover, the CM Hurricane 360 provides
flexibility and versatility for challenging applications.
The Hurricanes patented hand chain cover rotates a full
360 degrees, allowing loads to be lifted, positioned or
pulled from virtually any angle even in confined spaces.
It also permits the operator to stand safely away from
the load, helping to prevent accidents and injuries.
$
539.00
Qty:
Displaying: 1 - 24 of 54 Matching Items