Product Specifications
- Main Category: Hydraulics and Pneumatics
- Brand: Dixon Valve & Coupling Company
- Size: 1/4in
- Length: 1.73in
- Material: Brass
- Barb Size: 1/4in
- Number of Barbs: 2
- Working Pressure: 350psi
- Barb Length: 0.77in
- General Fitting Type: Couplings
- Detailed Fitting Type: Push-On insert x Push-On Insert
- Pipe and Fittings: Push-On Fittings
- OD (Outside Diameter): 1/4in
- Temperature Tolerance Range: -40deg F to 150deg F
- Alt. Size: 1/4"
- Alt. Length: 1.73"
Applications/Usage & Features
Details
Installation
- Assembly Instructions:
- 1. Trim hose end with smooth square cut.
- 2. Lubricate either push-on fitting, hose or both.
- 3. Insert push-on fitting into hose until first barb is in hose.
- 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.
Instructions
- Disassembly instructions:
- 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
- 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.
Note
No hose clamps or ferrules are needed
Safety Notes
- Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
- Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
Specifications
- Number of Barbs: 2
- Barb Length: .77"