Milwaukee
Ideal
View:
Active Filters :
Part #:312424
- Wing-Nut® Wire Connector, Model 452® Red, Box of 100
More power with every twist.
The Wing-Nut® Wire Connector provides an easy, secure grip when connecting a wide range of wires. The specially designed contoured wings make for extra torque and quick work on any electrical job. The wide range, live-action spring is flexible enough to handle small combinations with ease but then expands to accept large combinations when you need it. It can also be reused on same size or larger combinations for quick and easy circuit changes and additions.
The Wing-Nut® also features a tough, copolymer, flame-retardant shell that withstands environmental extremes with a deep skirt that provides maximum dielectric protection to prevent flash-over and turned-back strands.
The Red Model 452® offers the widest range winged connector in the industry from 2 #18 to 4 #10.
Largest range in the Industry - from 2 #18 to up 4 #10
High-leverage, contoured wing provides superior torque on every twist
Wide range, live-action spring handles small combinations and expands to accommodate large combinations as you need it
Copolymer shell expands for smooth, progressive tightening providing dependable connections
Removable for repeat usage on same size or larger combinations
Qty:
Part #:312444
- Wing-Nut® Wire Connector, Model 454® Blue, Box of 25
More power with every twist.
The Wing-Nut® Wire Connector provides an easy, secure grip when connecting a wide range of wires. The specially designed contoured wings make for extra torque and quick work on any electrical job. The wide range, live-action spring is flexible enough to handle small combinations with ease but then expands to accept large combinations when you need it. It can also be reused on same size or larger combinations for quick and easy circuit changes and additions.
The Wing-Nut® also features a tough, copolymer, flame-retardant shell that withstands environmental extremes with a deep skirt that provides maximum dielectric protection to prevent flash-over and turned-back strands.
The Red Model 452® offers the widest range winged connector in the industry from 2 #18 to 4 #10.
High-leverage, contoured wing design provides superior torque on every twist
Wide range, live-action spring handles small combinations and expands to accommodate large combinations as you need it
Copolymer shell expands for smooth, progressive tightening providing dependable connections
Removable for repeat usage on same size or larger combinations
Qty:
Part #:310704
- 100' S-Class® Fiberglass Fish Tape w/Metal Eyelet & Rapid-Pak® Case
S-Class® Fiberglass Fish Tapes are non-conductive, and the best choice when working near live circuits. A high quality fiberglass core provides column strength for optimum pushing and pulling capability. Its round shape allows an omni-directional capability perfect for multiple bends, or bends that change planes. Choose from three end types metal eyelet, a leader for even better maneuverability, and a nonconductive eyelet which prevents arc flash. Offered in two case choices our standard Tuff-Grip&trade Pro, as well as our own unique Rapid-Pak® design with an easy winder knob. Available in three lengths 50 ft., 100 ft., and 200 ft. Replacement tapes also available.
3/16" diameter
Non-conductive fish tape designed for use around live circuits
Strong S-Class® fiberglass core for strength and greater pushing power
Smooth nylon jacket protects fiberglass, and provides smooth surface for great handling around bends
Round shape provides omni-directional pushing through tough bends
Pulling strength 500 lbs.
Qty:
Part #:310386
- T®-5 T®-Stripper Wire Stripper
Invented and manufactured at our Sycamore Illinois facility, the T®-Stripper Wire stripper line is the leading brand name in the world for strippers. The industry standard for over50 years. Compact, lightweight and easy to use. Features precision-ground, knife-type blades, built-in looping holes, wire cutters and a convenient plier nose.
Form-ground, knife-type blades for accurate, easy stripping without nicking conductor
Laser-etched wire gauge for easy-to-read visibility
Spring-loaded automatic opening
Corrosion-resistant, black oxide finish
Tough steel construction
Strips 10-18 AWG solid, 12-20 AWG stranded
$
16.25
Qty:
Part #:200190
- 5 1/4" VALVE BOX RISER 2-1/2in Extension Riser
$
27.40
Qty:
Qty:
Part #:200536
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:204350
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Part #:206920
- Material Cast Iron Per ASTM A48 Class 30B
$
72.50
Qty:
Part #:310376
- Safe-T-Grip® Fuse Puller, Small
The Small Safe-T-Grip® Fuse Puller is fully insulated and is perfect for interchanging cartridge type fuses. It has a strong glass filled polypropylene construction that provides high di-electric strength. It is convenient to hold and features notched handles that offers more grip. Fuse puller is suitable for removing fuses of rating 250V. Puller is suitable for removing fuses of diameter ranging from 9/32" - 1/2".
Small Puller for 250V, 9/3" to 1/2" diameter fuses
5" overall length
Handy and convenient for removing or replacing cartridge-type fuses
Fully insulated, high dielectric, glass filled polypropylene construction
Notched handles provide safe, no-slip grip
Clearly marked amperage ranges
$
12.58
Qty:
closeout
$19.90 MSRP
$
16.55
Part #:400413
- CLOSEOUTS Only 1 Left!
- Product Overview Non-swaged hinge for surface application by welding Manufactured with cold rolled steel Five knuckle, full mortise design Tight pin for more secure applications
Qty:
closeout
$4.13 MSRP
$
3.42
Part #:401270
- CLOSEOUTS Only 4 Left!
- Product Overview Swaged for mortise installations Manufactured with cold rolled steel Five knuckle, full mortise design Loose pin allows doors to be removed without removing hinge
Qty:
closeout
$4.21 MSRP
$
3.40
Part #:401275
- CLOSEOUTS Only 7 Left!
- Authorized Replacement for Stanley Hardware Stock # S754-543 Product Overview Designed to secure a wide variety of doors, cabinets, boxes, trunks, etc. For security, all screws are concealed when hasp is closed Ribbed design for extra strength Includes rigid non-swivel staple Manufactured from hot rolled steel
Qty:
closeout
$5.99 MSRP
$
4.83
Part #:401276
- CLOSEOUTS Only 5 Left!
- Authorized Replacement for Stanley Hardware Stock # S754-579 Product Overview Designed to secure a wide variety of doors, cabinets, boxes, trunks, etc. For security, all screws are concealed when hasp is closed Ribbed design for extra strength Includes rigid non-swivel staple Manufactured from hot rolled steel
Qty:
closeout
$4.17 MSRP
$
3.20
Part #:401281
- CLOSEOUTS Only 12 Left!
- Product Overview Designed for security applications on lightweight doors, chests and cabinets Use on vertical, horizontal, left or right hand applications In vertical use, the notch-in case holds the bolt in a locked position Bolt diameter is .32 Durable steel case, strike and bolt
Qty:
Displaying: 25 - 48 of 337 Matching Items