Emerson Professional Tools, Llc
Crescent
View:
Active Filters :
Part #:703544
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
Part #:708927
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
closeout
$35.02 MSRP
$
23.45
Qty:
Part #:700341
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:700447
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:702391
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
closeout
$24.64 MSRP
$
19.84
Part #:511044
- CLOSEOUTS Only 12 Left!
- (Discontinued being replaced by AT26VS)
Qty:
Part #:701373
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Qty:
Part #:705123
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:705124
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
Qty:
Part #:308874
- 4200 Pro Series 6" Flex Taping Knife
The 4200 Professional Series of quality putty knives, wall scrapers, and taping knives. Black nylon solvent-resistant handle is designed for maximum safety and dependability. High-carbon, precision-ground steel blade is lacquered to prevent rust and extends through handle. The brass-plated, solid steel nail setting head can be used for setting drywall nails and other hammering jobs.
$
9.97
Qty:
Part #:511706
- 6" Bent Needle Nose Solid Joint Pliers
Crescent offers a broad range of pliers, including tongue and groove, slip joint, solid joint, and locking in a variety of styles. They are made from alloy steel to provide improved strength and durability. Available with either a dual material grip, an easy to clean dipped grip or professional steel handle, they are all designed for ergonomic comfort during continuous use. We make pliers for gripping, twisting, cutting, stripping, or bending wire and cable for use by both trades professionals and DIY users.
Qty:
Part #:1184-BAH80RUS3
- 3 pc SAE Adjustable Industrial Black Finish Wrench Set
&bull Slim head with tapered jaws combine easy accessibility with extra turning strength
&bull Measurement scale on head conveniently shows fastener size (except for 24" and 30" wrenches)
&bull Precision hardened and anti-corrosion treated
Qty:
Displaying: 1 - 15 of 15 Matching Items