Armstrong International
Imark/edn Milwaukee Electric
View:
Active Filters :
- Brand: Imark/edn Milwaukee Electric Armstrong International Star Pipe Products
- Alt. Size: 6"
Part #:200534
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Part #:204344
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:200024
- MATERIAL Ductile Iron per ASTM A536
PRESSURE 350 PSI rating for 2" - 24" sizes, 250 PSI rating for 30" - 48" sizes and 150 PSI rating for 54" - 64" sizes
TESTING In accordance with ANSI/AWWA C153/A21.53, ANSI/AWWA C111/A21.11, UL and FM requirements
LAYING LENGTH In accordance with ANSI/AWWA C153/A21.53 (fittings not listed in ANSI/AWWA have dimensions per Star design as noted in the catalog)
DEFLECTION 2"- 4"=8 6"=7 8"-12"=5 14"-16"=3 18"-24"=3 30"-64"=2
WEIGHTS Are in pounds, unless noted otherwise and do not include accessories, cement lining and coating
FLANGES Flanged ends on fittings match ANSI/AWWA C115/A21.15 and ANSI B16.1 class 125 flanges
CEMENT LINING In accordance with ANSI/AWWA C104/A21.4 -- size 2" - 3" single thickness and sizes 4" - 64" double thickness. Click here for a pressure jetting
discussion or visit http//www.starpipeproducts.com/pressure_cleaning_guidelines.asp.
COATING Asphaltic seal coat inside and out in accordance with ANSI/AWWA C104/A21.4 and referenced in ANSI/AWWA C153/A21.53
GASKETS SBR in accordance with ANSI/AWWA C111/A21.11 (see pg. 20)
T-BOLTS/NUTS Low alloy steel in accordance with ANSI/AWWA C111/A21.11 (see pg. 22)
APPROVALS 3" - 12" UL/ULC Listed 2" and greater are UL/ANSI/NSF Standards 61 and 372 3" - 16" FM APPROVED. Please consult factory for detail
listing and approvals.
DIMENSIONS All dimensions are in inches unless noted otherwise. (Click here for a short commentary on non-pressure sewer applications or visit http//
www.starpipeproducts.com/non-pressure_sewer_applications.asp. Review commentary before ordering or installing fittings for this application.)
INSTALLATION Per ANSI/AWWA C600 and C111 using DIP conforming to C150/C151 and PVC pipe conforming to C900/C905
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:205210
- Features and Advantages
&bull Sizes 3" - 12" consists of G2 design.&bull Can be used on 4"-48" AWWA C900 PVC, 4"-18" AWWA C909 PVCO and AWWA C906 HDPE pipes along with 3"-12" IPS ODASTM D2241 PVC pipe. (A transition gasket is required on IPS Plastic Pipe). See Tables A and B for further details.&bull Sizes 4"-12" are listed with Underwriters Laboratories, approved by Factory Mutual Research, and tested to and meets therequirements of ASTM F1674.&bull Safety factor is twice (21) the standardized pressure rating listed in Tables A and B.&bull Offers 5° of deflection on 3"-12" AWWA C900, 3° on 14"-24", 2° on 30"-36" and 1° on 42"-48".&bull Standard gland color is Coral Red and is made from high strength Ductile Iron per ASTM A536 Grade 65-45-12 and iscompatible with all Mechanical Joints that conform to ANSI/AWWA C111/A21.11.&bull Eliminates the need for tie rods and thrust blocks&bull Fewer wedges and lower wedge-bolt torque results in quicker and easier installation (see specifications and tables C, D & E).&bull Sizes 4"-12" uses a spacer that is easily removed when restraint is used on IPS Plastic pipe.&bull Curved wedges reduce the amount of localized pipe deformation.&bull The gland&rsquos larger inside diameter allows restraint to be installed on pipe with more ovality.&bull Improved design of the wedge bolts prevents over torquing which can damage PVC pipe.&bull For sizes 3"-12" and 42" -48" wedges are mechanically attached to wedge bolts, which eliminates the possibility of falling outduring shipping and handling.&bull US Patent# 9,822,910 applies to sizes 3"-12" and 42"-48".
Qty:
Qty:
Part #:501-D27090
- AEH Series Exhaust Heads Armstrongs AEH series carbon steel exhaust heads should be used when there is a risk of water carryover up an atmospheric vent pipe. The internal knock-out plate and stainless steel mesh screening effectively contains water carry-over and discharges it through the bottom drain leaving dry flash steam to vent through the top of the vessel.
Connections
• Flanged ASME B16.5 CL 150
• Drain FNPT
Qty:
Part #:501-D39124
- DS Series In-Line Condensate SeparatorsCarbon Steel Drain SeparatorCondensate in steam and air piping reduces thermal efficiency, causes water hammer, corrodes equipment such as valves and pipes, and causes other problems.
In-line (drain) separators DS-1, DS-2, DS-3, and DS-4 separate condensate efficiently by using the centrifugal force of steam or air created by introducing it into a specifically shaped path. Because of the simple structure of the drain separators, pressure loss is minimized, enabling clean, dry steam or air to be fed to equipment.
When steam or air flow enters the drain separator, centrifugal force is generated in the fluid because of the devices internal structural design. The fluid drains along the wall because of the difference in specific gravity with steam or air, eventually striking the baffle. The baffle guides the fluid to the drain outlet and to the trap, which drains it. As a result, small dirt particles and condensate are separated and removed from the system through the bottom drain.
• Cyclone structure maximizes liquid separation efficiency
• Pressure loss is extremely low
• No moving parts means no breakdowns
Qty:
Part #:501-D502638
- A/CA Series Cast Iron Y-Type Pipe Strainer Y-Type Cast Iron Strainer
• 250lb Screwed 1/2in - 3in
• Class 125 Flanged 2in - 6in
• Class 250 Flanged 2in - 6inScreen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Displaying: 1 - 24 of 24 Matching Items