Indiana-Seal
Dixon Valve & Coupling Company
View:
Active Filters :
- Brand: Dixon Valve & Coupling Company Indiana-Seal Jamesbury
- Size: 4in 6in
Part #:703250
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:703544
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
Part #:704795
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:706863
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:708731
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:708927
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
Part #:710085
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:509605
- Cast Iron Threaded Foot Valve Attributes
Weight
15.52 lb
Size
4"
Material
Painted Cast Iron
Thread
NPT
$
106.03
Qty:
Part #:800635
- Boss-Lock Cam & Groove Type B Coupler x Male NPT Attributes
Maximum Operating Pressure
100 PSI
Weight
2.36 lb
Size
4"
Material
356T6 Aluminum
Seal
Buna-N
$
89.96
Qty:
Part #:800955
- Dixon Cam & Groove Type E Adapter x Hose Attributes
Maximum Operating Pressure
100 PSI
150 PSI with King Crimp Ferrule system
Weight
2.155 lb
Size
4"
Material
356T6 Aluminum
$
50.13
Qty:
Part #:800970
- Dixon Cam & Groove Type F Adapter x Male NPT Attributes
Maximum Operating Pressure
100 PSI
Weight
2.23 lb
Size
4"
Material
356T6 Aluminum
$
53.20
Qty:
Qty:
Qty:
Part #:500645
- Round Hole Strainer Attributes
Weight
3.14 lb
Material
Zinc Plated Steel
Thread
NPSM
Thread Size
4"
$
36.84
Qty:
Part #:206006
- 1404045:
$
46.35
Qty:
Part #:206985
- 1404037:
Qty:
Part #:206990
- 1406024:
Qty:
Part #:800600
- Dixon Cam & Groove Type A Adapter x Female NPT Attributes
Maximum Operating Pressure
100 PSI
Weight
1.3 lb
Size
4"
Material
356T6 Aluminum
$
43.92
Qty:
Part #:800805
- Boss-Lock Cam & Groove Type D Coupler x Female NPT
Attributes
Maximum Operating Pressure
100 PSI
Weight
2.2 lb
Size
4"
Material
356T6 Aluminum
Seal
Buna-N
$
69.49
Qty:
Part #:800735
- Boss-Lock Cam & Groove Type C Coupler x Hose Shank Attributes
Maximum Operating Pressure
100 PSI
Weight
2.5 lb
Size
4"
Material
356T6 Aluminum
Seal
Buna-N
$
95.43
Qty:
Part #:334-600-A-SS
- Dixon Cam & Groove Type A Adapter x Female NPT Attributes
Maximum Operating Pressure
75 PSI
Weight
5.66 lb
Size
6"
Material
316 Stainless Steel
$
249.30
Qty:
Part #:334-AC600
- Boss-Lock Cam & Groove Type C Coupler x Hose Shank Attributes
Maximum Operating Pressure
75 PSI
Weight
5.52 lb
Size
6"
Material
356T6 Aluminum
Seal
Buna-N
$
207.93
Qty:
Part #:801106
- Dixon Cam & Groove Type DP Dust Plug Attributes
Weight
1.38 lb
Size
4"
Material
356T6 Aluminum
$
28.12
Qty:
Part #:801490
- Cam & Groove Gasket Attributes
Weight
0.07 lb
Size
4" (100 mm)
Material
Neoprene
Color Code
1 red stripe
Color
Black
$
3.04
Qty:
Displaying: 1 - 24 of 79 Matching Items