Intermatic
Hangerlok
View:
Active Filters :
- Brand: Hangerlok Intermatic
Part #:301702
- Stem Mount Thermal Photocontrol, 120 V
These photocontrols install on standard outdoor light fixtures and electrical boxes with 1&frasl2"-14 NPSM thread or 7&frasl8" knock-out holes for dusk-to-dawn ON/OFF control of outdoor lighting.
$
15.35
Qty:
Part #:305991
- Locking Type Thermal Photocontrol, 120-277 V
These photocontrols install on light fixtures with ANSI C136.10 NEMA receptacles commonly found on street light fixtures. Locking type design facilitates fast installation and replacement of photocontrol.
$
24.41
Qty:
Part #:307241
- NightFox&trade Stem Mount Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½&rdquo-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8&rdquo diameter. Come with 9" wire leads.
$
22.40
Qty:
Part #:309367
- NightFox&trade Select Grade Locking Type Electronic Photocontrol, 120-277 V
Designed to meet a 15-year service life, this photocontrol is LED-compatible and backed by an 8-year warranty.
$
17.96
Qty:
Part #:300423
- Wall Mount Thermal Photocontrol, 120 V
Intermatic&rsquos wall mount thermal-type photocontrol installs into standard outdoor single-gang electrical boxes. The photocontrol provides dusk-to-dawn lighting control. Compatible with Fluorescent, HID, and Incandescent bulbs.
$
16.96
Qty:
Part #:309735
- NightFox&trade Stem and Swivel Mount Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½&rdquo-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8&rdquo diameter. Come with 9" wire leads.
$
24.48
Qty:
Part #:300145
- Extra/replacement trippers 1 ON and 1 OFF
Indoor Lighting Control
Timing/Scheduling ON/OFF
$
3.67
Qty:
Part #:302241
- Locking Type Receptacle, 3-Pin, C136.10 Compliant, with Pole Mounting Bracket
The K122 NEMA receptacles provide the connector interface for locking type photocontrols. They can be installed in the light fixture itself, or attached externally with the use of a mounting bracket (included).
$
28.66
Qty:
Part #:302607
- Set of 12 Trippers for T1900, T2000, C8800, R8800 and T8800 Series
$
4.40
Qty:
closeout
Part #:303880
- CLOSEOUTS Only 2 Left!
- For Indoor/Outdoor Use
$
36.89
Qty:
Part #:704656
- Designed to simplify, streamline and secure a wide range of industry piping and conduit systems.
Hangerlok was developed to bring greater performance to construction, OEM, design projects and the engineering community.
Having the marketing and engineering knowledge of decades in these markets, the people who brought you the first thermoplastic support hanger, developed Hangerlok to improve function and performance driven application needs.
Using experienced designers, Solidworks engineers, independent testing parties to provide substantial data and improved design, Hangerlok was created.
Improved materials offer improved performance and broader application opportunities. Using a Nylon 6/ 6 polymer, Hangerlok can be used inside facilities and also exposed areas. Using both a UV inhibitor and a flame retardant, Hangerlok is durable and halogen free. It is by far the best material for this product type.
Being UV resistant along with it&rsquos non-conductive qualities, Hangerlok&rsquos versatility makes it a must have one piece pipe hanger and conduit support system.
Over the years of selling the original auto-locking support and hanger, materials changed that did not meet market demands and certain applications. There needed to be a better product and Hangerlok met that need.
$
0.86
Qty:
Part #:704667
- Designed to simplify, streamline and secure a wide range of industry piping and conduit systems.
Hangerlok was developed to bring greater performance to construction, OEM, design projects and the engineering community.
Having the marketing and engineering knowledge of decades in these markets, the people who brought you the first thermoplastic support hanger, developed Hangerlok to improve function and performance driven application needs.
Using experienced designers, Solidworks engineers, independent testing parties to provide substantial data and improved design, Hangerlok was created.
Improved materials offer improved performance and broader application opportunities. Using a Nylon 6/ 6 polymer, Hangerlok can be used inside facilities and also exposed areas. Using both a UV inhibitor and a flame retardant, Hangerlok is durable and halogen free. It is by far the best material for this product type.
Being UV resistant along with it&rsquos non-conductive qualities, Hangerlok&rsquos versatility makes it a must have one piece pipe hanger and conduit support system.
Over the years of selling the original auto-locking support and hanger, materials changed that did not meet market demands and certain applications. There needed to be a better product and Hangerlok met that need.
$
1.55
Qty:
closeout
Part #:310284
- CLOSEOUTS Only 1 Left!
- Specifications
UL/CUL Listed for Wet Locations
Heavy Duty Die-Cast Aluminum Powder Coating Construction
High-Impact Polycarbonate Lens
Corrosion Resistant
1/2" Tapped Holes Available for Installling Photocell
120v Ballast
$
111.54
Qty:
Intermatic 24-Hour Mechanical Time Switch 120v 60hz SPST Indoor Metal Enclosure 1 hour Interval T101
- 24-Hour Mechanical Time Switch, 120 VAC, 60Hz, SPST, Indoor Metal Enclosure, 1 Hour Interval
The T100 Series Mechanical Time Switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience.
$
86.52
Qty:
Intermatic 24-Hour Mechanical Time Switch 208v-277v 60hz Indoor Metal Enclosure 1 Hour Interval T104
- 24-Hour Mechanical Time Switch, 208-277 VAC, 60Hz, DPST, Indoor Metal Enclosure, 1 Hour Interval
The T100 Series Mechanical Time Switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience.
$
101.37
Qty:
Intermatic 24-Hour Mechanical Time Swtich 120v 60hz DPST Indoor Metal Enclosure 1 Hour Interval T103
- 24-Hour Mechanical Time Switch, 120 VAC, 60Hz, DPST, Indoor Metal Enclosure, 1 Hour Interval
The T100 Series Mechanical Time Switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience.
$
100.06
Qty:
Part #:302724
- Locking Type Thermal Photocontrol, 480 V
These photocontrols install on light fixtures with ANSI C136.10 NEMA receptacles commonly found on street light fixtures. Locking type design facilitates fast installation and replacement of photocontrol.
$
31.03
Qty:
Part #:303046
- Spring Wound Countdown Timer, Commercial, 125-277 VAC, 50/60 Hz, SPST, 15 Minute Max, Without Hold, Silver
The FF Series Commercial Countdown Timers are designed to replace any standard wall switch and do not require electricity to operate. These energy-efficient switches automatically limit the ON times for fans, lighting, motors, heaters, and other energy consuming loads. A commercial "brushed metal" look plate (plastic construction) meets NEC requirements. NOTE Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly.
$
34.52
Qty:
Part #:303047
- Spring Wound Countdown Timer, Commercial, 125-277 VAC, 50/60 Hz, SPST, 30 Minute Max, Without Hold, Silver
The FF Series Commercial Countdown Timers are designed to replace any standard wall switch and do not require electricity to operate. These energy-efficient switches automatically limit the ON times for fans, lighting, motors, heaters, and other energy consuming loads. A commercial "brushed metal" look plate (plastic construction) meets NEC requirements. NOTE Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly.
$
34.52
Qty:
Part #:300541
- Spring Wound Countdown Timer, Commercial, 125-277 VAC, 50/60 Hz, SPST, 60 Minute Max, Without Hold, Silver
The FF Series Commercial Countdown Timers are designed to replace any standard wall switch and do not require electricity to operate. These energy-efficient switches automatically limit the ON times for fans, lighting, motors, heaters, and other energy consuming loads. A commercial "brushed metal" look plate (plastic construction) meets NEC requirements. NOTE Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly.
$
34.52
Qty:
Part #:301240
- Mechanical Water Heater Time Switch
With the easy-to-set "Yellow Dial," these time switches allow for basic control of electric water heaters. These time switches offer a minimum ON/OFF time of one hour, and are available for 208-250 VAC applications. With the proven reliability of our mechanical line, these time switches provide dependable electric water heater control.
$
109.36
Qty:
closeout
$
44.68
Qty:
Part #:312425
- Stem Mount Thermal Photocontrol, 208-277 V
These photocontrols install on standard outdoor light fixtures and electrical boxes with 1&frasl2"-14 NPSM thread or 7&frasl8" knock-out holes for dusk-to-dawn ON/OFF control of outdoor lighting.
$
28.45
Qty:
Part #:312496
- 24-Hour Mechanical Time Switch, 208-277 VAC, 60Hz, SPST, Indoor Metal Enclosure, 1 Hour Interval
The T100 Series Mechanical Time Switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience.
$
106.72
Qty:
Displaying: 1 - 24 of 70 Matching Items