J. H. Williams
Greenlee
View:
Active Filters :
Part #:511684
- 1/2" Drive Crowfoot Wrench Set, Open End, SAE, 12 Pieces
10840 12 Piece 1/2" Drive Crowfoot Wrenches on Clip RailsContents IncludeProduct Code Size (Inches) 10810 15&frasl16 10811 1 10812 1 1&frasl16 10813 1 1&frasl8
10814 1 3&frasl16
10815 1 1&frasl4
10816 1 5&frasl16
10817 1 3&frasl8
10818 1 7&frasl16
10819 1 1&frasl2
10820 1 9&frasl16
10821 1 5&frasl8
Qty:
Part #:500594
- 1-1/8" Step Bit (#9)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2" drill chucks
Laser markings for quick, easy product and size identification.
Replaced 30008
Also available for sale in a carton, qty. 25 (Cat # GSB09-B UPC # 783310082071)
$
71.95
Qty:
Part #:500536
- 1/2" Step Bit (#1)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provide balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34401
Also available for sale in a carton, qty. 25 (Cat # GSB01-B UPC # 783310082057)
Qty:
Part #:500574
- 7/8" Step Bit (#4)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34403
Also available for sale in a carton, qty. 25 (Cat # GSB04-B UPC # 783310082040)
$
55.05
Qty:
Part #:521244
- Extended DTAP Kit
Complete hole drilling, tapping and deburring/countersinking in one operation using power drill to save time and labor
Back tapered beyond tap to prevent thread damage from over-drilling
Made from hardened high-speed steel versus carbon-steel for longer life
High wuality hex shank to ensure strong connection to drill chuck
Designed to tap up to 10 gauge metal
Quick change adaptor included
$
72.00
Qty:
Part #:510307
- 240' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Fish tape is available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
$
115.80
Qty:
Part #:507333
- 67362 V & B Supreme Replacement Handle for 10# to 16# Sledge Hammers. Eye Size 1-3/8" x 1". Length 36". Includes one wood wedge, one steel wedge and instructions. MADE IN USA.
$
13.88
Qty:
Qty:
Part #:506907
- The 16oz 99 hammers are based on a unique rip hammer design originated by Vaughan. The extra steel behind the striking face, and the deep throat, octagon neck and smoothly swept claws creates a hammer that looks as good as it feels in use. Rust-resistant powder coat finish. MADE IN USA.
Qty:
Part #:506922
- R99 has Polished striking head, sides and claw. Octagon neck and round face. Forged steel from head to heel. Exclusive, Shock-Blok&trade plug in head absorbs shock. Non-slip cushioned PVC grip is molded to handle. "MADE IN THE USA".
Qty:
Part #:507326
- Supreme Hickory replacement handle for 2 lb to 4 lb Blacksmith Hammer. Oval Eye 1 inch x 3/4 inch. Overall length 16 inches. One wood wedge, two steel wedges and instructions included. MADE IN USA.
Qty:
Part #:508143
- DB200 Heads are partially filled with steel shot to increase impact and reduce rebound. The one-piece threaded faces feature a shoulder to absorb the force of side blows, protecting the threads. The one-piece, aluminum alloy heads are serrated to help keep the faces tight. A neoprene compound grip on the handle absorbs shock. Supplied with two white nylon faces. MADE IN ENGLAND.
Qty:
Part #:501682
- Slug-Buster® 1/2" Conduit Size Replacement Punch
Made in USA
Alignment Markings improve punching accuracy and productivity
Punches and dies are clearly marked for quick part identification
$
34.30
Qty:
Part #:504951
- Standard Round 1/2" - 1-1/4" Manual Knockout Set
For use with new Greenlee KRW-1 high-leverage ratchet wrench
Slug-Buster® punch profile splits slugs for easy slug removal
Knurled edge on punches for better grip
New die design optimized for widest range of materials and drivers
Easy threading - draw studs with "dog point" tip helps eliminate cross-threading.
Knockout set punches, dies and case made in the USA
Draw stud manufactured in the USA from US and global components
Laser markings for quick part identification. Alignment markings for improved accuracy.
$
299.00
Qty:
Part #:807974
- 11/16 x 18 Nail Eater® Bit
Improved cutting edge provides 30% longer life span
Patented new design for improved cutting and cleaner holes
Self-feeding screw point draws bit through wood
Unique patented design cutting angle - smoother starts, reduced cutting loads
Made of super tough, heat-treated steel
Cuts through nails and provides longer life
Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s
See Bit Extensionsif more length is required
P.O.P packaged
$
34.45
Qty:
Part #:500437
- 1/2" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Laser markings for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 60246
$
60.60
Qty:
Part #:500493
- 3/4" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Knockout sets are laser marked for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 7211BB-3/4
$
78.75
Qty:
Part #:506962
- HD3 3 LB Hand Driller the right hammer for striking star drills, cold chisels, brick chisels and punches. Broad, polished striking faces with generous bevels. Rust-resistant powder coat finish on smooth ground sides. Select, hickory handle. MADE IN USA.
Qty:
Part #:811000
- Pro Stainless Wire Stripper / Cutter / Crimper
High grade stainless steel lasts 5X longer
Precision ground stripping holes offer easy, consistent jacket removal
Strips 10-18 AWG Solid and12-20 AWG Stranded conductors
Cleanly shears 6-32 and 8-32 bolts
Crimps 16-10 insulated and non-insulated terminals
Multiple functions include plier nose, strippers, cutter, looping holes, crimper, bolt re-thread/shear and spring back with low profile lock
Looping holes and serrated nose for bending, pulling and shaping wires
Long-life spring and low-profile lock for quick, repetitive stripping and cutting
Vinyl cushion grip resists slipping and has an ergonomic fit
$
24.65
Qty:
closeout
$23.00 MSRP
$
15.01
Part #:504774
- CLOSEOUTS Only 1 Left!
- 1/2" Drive 6-Point SAE 1-1/8" Shallow Socket &bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener &bull Designed for maximum engagement on 6 point fasteners
Qty:
Part #:507311
- 61162 Supreme Adze Eye replacement handle for 13-16 oz. Claw hammers & Vaughan 16 oz. Scaling Hammer. Fits 99 & SC16. Eye 1 inch x 1/2 inch. Overall length 13 1/2 inches. One wood wedge, 2 steel wedges and instructions included. MADE IN USA.
Qty:
Part #:500214
- 9-Piece Quick-Change Hole Saw Set with 7/8" - 2-1/2" Saws
Only one arbor required for sizes 7/8 - 6 In
Drills pilot hole without a saw
$
131.55
Qty:
Part #:511006
- Digital Light Meter
Measures incandescent, fluorescent, metal halide, high-pressure sodium and halogen lamp output
Color and cosine-corrected for enhanced accuracy
Measures up to 50,000 lux
Peak and data hold means no lost measurements
Accessories included (1) 9V battery and carrying case
Lifetime Limited Warranty
$
261.55
Qty:
Part #:804724
- 1/2" EMT Hand Bender
Bends offsets in one easy operation
Insert conduit, depress handle, release and remove conduit Makes identical offsets every time for wall mounted boxes with exposed conduit Creates offset that matches the knockout in box Maximum offset of 0
.56" (9/16)
$
351.55
Qty:
Displaying: 1 - 24 of 189 Matching Items