LoveJoy
Jamesbury
View:
Active Filters :
- Brand: Jamesbury LoveJoy Lukjan Pennunion Corp
- Actuators: Pneumatic Actuators
Part #:705850
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708705
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708713
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708714
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708717
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708721
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709250
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709251
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709253
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709476
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709813
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:710076
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:704803
- Jamesbury Quadra-Powr X 2(QPX2) including 60psi spring option and male square drive with 50 ft-lbs end of air output torque and 57 ft-lbs end of spring output torque at 60psi supply air. Jamesbury Part # C0221605 QPX2C/MC
Quadra-Powr X (QPX) Spring-Diaphragm Rotary ActuatorsExclusively developed for quarter-turn valve service, Quadra-PowrX spring-diaphragm actuators provide safe and reliable operation even when minimal supply pressures are available. Yet they are capable of operating at pressures as high as 7 bar (100 psi). These units can be operated by air, gas, water, oil, or other supply media compatible with the ductile iron/carbon steel casing of the actuator and the Buna-N diaphragm reinforced with polyamide fabric. Quadra-PowrX torque outputs range from 15 to 796 Nm (11 to 587 ft lbs), depending on actuator selection and available supply pressure.
Qty:
Part #:708707
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708712
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708715
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708716
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708720
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709051
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709252
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709493
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709801
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:710077
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Qty:
Displaying: 1 - 24 of 24 Matching Items