Milwaukee Tools
Jamesbury
View:
Active Filters :
- Brand: Jamesbury Milwaukee Tools
- Size: 4ft 6in T25
Part #:703544
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
Part #:708927
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
Part #:503117
- 6" Carbide Grit SAWZALL® Blade (3 Pk)
Milwaukee® carbide grit blades are designed for cutting ceramic tile, plaster, masonry, brick, fiberglass and other abrasive materials.
Qty:
Part #:700341
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:700447
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:702391
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:701373
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Qty:
Part #:705123
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:705124
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
Part #:729-E255IM
- Business Unit Hand Tools, Storage, PPE. Product Level 1 HT|S|PPE-Layout. Product Level 2 HT|S|PPE-Squares. Product Level 3 HT Combo Squares. Product Level 4 HT IM Squares. Product Level 5 HT Empire. AX Item Number E255IM. Country of Origin USA. Harmonized Tariff 9017208080.:
Qty:
Part #:729-48-32-4185
- SHOCKWAVE&trade 2" Impact Torx® T25 Power Bits (25 Pk)
Our SHOCKWAVE&trade Impact Duty&trade Torx Bits are engineered to be the Most Durable, Best Fitting driver bits on the market. The Wear Guard Tip&trade delivers increased wear resistance which protects the fit over the life of the bit. The Shockzone&trade is optimized for for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76&trade has customized steel and heat treatment per tip type to extend the life of the driver bits, providing up to 50X life vs. competitive impact driver bits. The MILWAUKEE® SHOCKWAVE&trade driver bits are built to deliver extreme durability for the most demanding applications.
Qty:
Part #:503778
- 13 Amp 6" Small Angle Grinder Paddle, No-Lock
The 13 Amp 6" Small Angle Grinder (Paddle, Lock-On) delivers up to 30% more durability and power than the competition. With a 2,100 MWO motor that powers through the toughest jobs, the 6161-30 is the perfect match for industrial users. Milwaukee's Electronic Advantage includes Overload Protection to maximize motor life, an Electronic Clutch that extends tool life and helps prevent bind-up, Line Lock-Out that prevents automatic start-up after power loss, and Soft Start. Constant Power Technology® enables the grinder to maintain speed under load for unmatched performance and productivity. Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed product, without a wrench. In addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Qty:
Part #:729-49-93-7815
- 6" SteelHead Diamond Cut-Off
Qty:
Part #:729-2980-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Metal Working. Product Level 3 TOL Grinders. Product Level 4 TOL SAGs. Product Level 5 TOL FUEL. AX Item Number 298020. Country of Origin VNM. Harmonized Tariff 8467290010.:
Qty:
Part #:729-2980-22
- M18 FUEL&trade 4-1/2&rdquo - 6&rdquo Braking Grinder Kit, Paddle Switch No-Lock
Our M18 FUEL&trade 4-1/2&rdquo - 6&rdquo Braking Grinder, Paddle Switch, No-Lock two battery kit is our highest performing small angle grinder. It generates the power of a 13A corded grinder, brakes all accessories under 3 seconds, and has 6&rdquo grinding capacity. The POWERSTATE&trade Brushless Motor provides you with 9,000 RPM and the power equivalent of a 13A corded grinder, delivering industry-leading performance. REDLINK PLUS&trade Intelligence ensures maximum performance and protects your angle grinder from overload, overheating and over discharge. The Rapid Stop Brake feature stops all accessories in under 3 seconds. Providing you with high performance, advanced ergonomics and legendary durability, the M18 FUEL&trade 4-1/2&rdquo - 6&rdquo Braking Grinder is designed to complete the toughest grinding, surface preparation and cutting applications with all 4-1/2&rdquo &ndash 6&rdquo accessories. The M18&trade REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Battery provides you with more material removed per charge and unmatched run-time in all applications. Tool-free accessory changes using the FIXTEC nut and tool-free guard adjustments mean you will experience less downtime as you work.The cordless angle grinder's grinding wheel is sold separately. The kit includes two M18&trade REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Batteries.
Close
Includes
(1)
M18 FUEL&trade 4-1/2&rdquo - 6&rdquo Braking Grinder Paddle Switch, No-Lock (2980-20)
(2)
M18 REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Battery Pack (48-11-1865)
(1)
M18&trade & M12&trade Rapid Charger (48-59-1808)
(1) FIXTEC Nut (1) T27 Guard (1) Back Flange (1) Wrench (1) Side Handle
Read More
Where to Buy
Share This
Qty:
Qty:
Displaying: 1 - 17 of 17 Matching Items