Joint Restraint
View:
Active Filters :
- Underground Utility: Joint Restraint
Part #:200534
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Part #:204343
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Part #:204344
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Part #:200536
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Part #:204350
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Part #:411-SF403GN
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Part #:207102
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Part #:200413
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Part #:200537
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Part #:209524
- Features and Advantages
&bull Sizes 3" - 12" consists of G2 design.&bull Can be used on 4"-48" AWWA C900 PVC, 4"-18" AWWA C909 PVCO and AWWA C906 HDPE pipes along with 3"-12" IPS ODASTM D2241 PVC pipe. (A transition gasket is required on IPS Plastic Pipe). See Tables A and B for further details.&bull Sizes 4"-12" are listed with Underwriters Laboratories, approved by Factory Mutual Research, and tested to and meets therequirements of ASTM F1674.&bull Safety factor is twice (21) the standardized pressure rating listed in Tables A and B.&bull Offers 5° of deflection on 3"-12" AWWA C900, 3° on 14"-24", 2° on 30"-36" and 1° on 42"-48".&bull Standard gland color is Coral Red and is made from high strength Ductile Iron per ASTM A536 Grade 65-45-12 and iscompatible with all Mechanical Joints that conform to ANSI/AWWA C111/A21.11.&bull Eliminates the need for tie rods and thrust blocks&bull Fewer wedges and lower wedge-bolt torque results in quicker and easier installation (see specifications and tables C, D & E).&bull Sizes 4"-12" uses a spacer that is easily removed when restraint is used on IPS Plastic pipe.&bull Curved wedges reduce the amount of localized pipe deformation.&bull The gland&rsquos larger inside diameter allows restraint to be installed on pipe with more ovality.&bull Improved design of the wedge bolts prevents over torquing which can damage PVC pipe.&bull For sizes 3"-12" and 42" -48" wedges are mechanically attached to wedge bolts, which eliminates the possibility of falling outduring shipping and handling.&bull US Patent# 9,822,910 applies to sizes 3"-12" and 42"-48".
Qty:
Part #:209525
- Features and Advantages
&bull Sizes 3" - 12" consists of G2 design.&bull Can be used on 4"-48" AWWA C900 PVC, 4"-18" AWWA C909 PVCO and AWWA C906 HDPE pipes along with 3"-12" IPS ODASTM D2241 PVC pipe. (A transition gasket is required on IPS Plastic Pipe). See Tables A and B for further details.&bull Sizes 4"-12" are listed with Underwriters Laboratories, approved by Factory Mutual Research, and tested to and meets therequirements of ASTM F1674.&bull Safety factor is twice (21) the standardized pressure rating listed in Tables A and B.&bull Offers 5° of deflection on 3"-12" AWWA C900, 3° on 14"-24", 2° on 30"-36" and 1° on 42"-48".&bull Standard gland color is Coral Red and is made from high strength Ductile Iron per ASTM A536 Grade 65-45-12 and iscompatible with all Mechanical Joints that conform to ANSI/AWWA C111/A21.11.&bull Eliminates the need for tie rods and thrust blocks&bull Fewer wedges and lower wedge-bolt torque results in quicker and easier installation (see specifications and tables C, D & E).&bull Sizes 4"-12" uses a spacer that is easily removed when restraint is used on IPS Plastic pipe.&bull Curved wedges reduce the amount of localized pipe deformation.&bull The gland&rsquos larger inside diameter allows restraint to be installed on pipe with more ovality.&bull Improved design of the wedge bolts prevents over torquing which can damage PVC pipe.&bull For sizes 3"-12" and 42" -48" wedges are mechanically attached to wedge bolts, which eliminates the possibility of falling outduring shipping and handling.&bull US Patent# 9,822,910 applies to sizes 3"-12" and 42"-48".
Qty:
Part #:200412
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Part #:204671
- Description
&bull Designed to assist in restraining of mechanical joint fittings, valves,hydrants and pipes by threaded rods&bull Manufactured with high strength ductile iron per ASTM A 536, Grade65-45-12&bull Designed for use on sizes 4" through 24"&bull Installed between MJ Bell and MJ Gland
Qty:
Part #:205210
- Features and Advantages
&bull Sizes 3" - 12" consists of G2 design.&bull Can be used on 4"-48" AWWA C900 PVC, 4"-18" AWWA C909 PVCO and AWWA C906 HDPE pipes along with 3"-12" IPS ODASTM D2241 PVC pipe. (A transition gasket is required on IPS Plastic Pipe). See Tables A and B for further details.&bull Sizes 4"-12" are listed with Underwriters Laboratories, approved by Factory Mutual Research, and tested to and meets therequirements of ASTM F1674.&bull Safety factor is twice (21) the standardized pressure rating listed in Tables A and B.&bull Offers 5° of deflection on 3"-12" AWWA C900, 3° on 14"-24", 2° on 30"-36" and 1° on 42"-48".&bull Standard gland color is Coral Red and is made from high strength Ductile Iron per ASTM A536 Grade 65-45-12 and iscompatible with all Mechanical Joints that conform to ANSI/AWWA C111/A21.11.&bull Eliminates the need for tie rods and thrust blocks&bull Fewer wedges and lower wedge-bolt torque results in quicker and easier installation (see specifications and tables C, D & E).&bull Sizes 4"-12" uses a spacer that is easily removed when restraint is used on IPS Plastic pipe.&bull Curved wedges reduce the amount of localized pipe deformation.&bull The gland&rsquos larger inside diameter allows restraint to be installed on pipe with more ovality.&bull Improved design of the wedge bolts prevents over torquing which can damage PVC pipe.&bull For sizes 3"-12" and 42" -48" wedges are mechanically attached to wedge bolts, which eliminates the possibility of falling outduring shipping and handling.&bull US Patent# 9,822,910 applies to sizes 3"-12" and 42"-48".
Qty:
Part #:205212
- Features and Advantages
&bull Sizes 3" - 12" consists of G2 design.&bull Can be used on 4"-48" AWWA C900 PVC, 4"-18" AWWA C909 PVCO and AWWA C906 HDPE pipes along with 3"-12" IPS ODASTM D2241 PVC pipe. (A transition gasket is required on IPS Plastic Pipe). See Tables A and B for further details.&bull Sizes 4"-12" are listed with Underwriters Laboratories, approved by Factory Mutual Research, and tested to and meets therequirements of ASTM F1674.&bull Safety factor is twice (21) the standardized pressure rating listed in Tables A and B.&bull Offers 5° of deflection on 3"-12" AWWA C900, 3° on 14"-24", 2° on 30"-36" and 1° on 42"-48".&bull Standard gland color is Coral Red and is made from high strength Ductile Iron per ASTM A536 Grade 65-45-12 and iscompatible with all Mechanical Joints that conform to ANSI/AWWA C111/A21.11.&bull Eliminates the need for tie rods and thrust blocks&bull Fewer wedges and lower wedge-bolt torque results in quicker and easier installation (see specifications and tables C, D & E).&bull Sizes 4"-12" uses a spacer that is easily removed when restraint is used on IPS Plastic pipe.&bull Curved wedges reduce the amount of localized pipe deformation.&bull The gland&rsquos larger inside diameter allows restraint to be installed on pipe with more ovality.&bull Improved design of the wedge bolts prevents over torquing which can damage PVC pipe.&bull For sizes 3"-12" and 42" -48" wedges are mechanically attached to wedge bolts, which eliminates the possibility of falling outduring shipping and handling.&bull US Patent# 9,822,910 applies to sizes 3"-12" and 42"-48".
Qty:
Qty:
closeout
$
15.49
Qty:
Part #:221100
- #585 Washers Carbon Steel For 3&rdquo - 12&rdquo Socket Clamps&bull Usage for 3/4&rdquo rod&bull Two washers are requiredfor each Socket Clamp
$
6.40
Qty:
Part #:203864
- Socket Clamps Pipe OD 4.8, 5/8in-11 x 3in Bolt Size, Stock Size 1/2in x 2in,
$
56.85
Qty:
Part #:203865
- Socket Clamps Pipe OD 6.90in, 5/8in-11 x 3in Bolt Size, Stock Size 1/2in x 2in,
For use in preventing underground pipe joints from separating
Also known as &ldquoRetainer Clamps&rdquo or &ldquoFriction Clamps&rdquo. Designed for centrifugally-spun cast and ductile iron pipe with OD&rsquos as shown in the table below.
All Socket Clamps include two half clamps, two bolts and nuts and two washers. Sizes 3&Prime through 12&Prime are supplied with #585 cast washers, which are shown below as replacement parts. Sizes 14&Prime and larger are supplied with two fabricated washers.
Used with all-thread rod and Trumbull tie-lugs or tie-bolts for joint restraint, shown
$
56.65
Qty:
Part #:203866
- Socket Clamps Pipe OD 9.05in, 5/8in-11 x 3in Bolt Size, Stock Size 1/2in x 2in,
For use in preventing underground pipe joints from separating
Also known as &ldquoRetainer Clamps&rdquo or &ldquoFriction Clamps&rdquo. Designed for centrifugally-spun cast and ductile iron pipe with OD&rsquos as shown in the table below.
All Socket Clamps include two half clamps, two bolts and nuts and two washers. Sizes 3&Prime through 12&Prime are supplied with #585 cast washers, which are shown below as replacement parts. Sizes 14&Prime and larger are supplied with two fabricated washers.
Used with all-thread rod and Trumbull tie-lugs or tie-bolts for joint restraint, shown
$
84.75
Qty:
Part #:203867
- Socket Clamps Pipe OD 11.10in, 5/8in-11 x 3in Bolt Size, Stock Size 1/2in x 2in,
For use in preventing underground pipe joints from separating
Also known as &ldquoRetainer Clamps&rdquo or &ldquoFriction Clamps&rdquo. Designed for centrifugally-spun cast and ductile iron pipe with OD&rsquos as shown in the table below.
All Socket Clamps include two half clamps, two bolts and nuts and two washers. Sizes 3&Prime through 12&Prime are supplied with #585 cast washers, which are shown below as replacement parts. Sizes 14&Prime and larger are supplied with two fabricated washers.
Used with all-thread rod and Trumbull tie-lugs or tie-bolts for joint restraint, shown
Qty:
Part #:1585-364-3429
- Socket Clamps Pipe OD 17.40, 1in-8 x 4-1/2in Bolt Size, Stock Size 3/4in x 4in,
For use in preventing underground pipe joints from separating
Also known as &ldquoRetainer Clamps&rdquo or &ldquoFriction Clamps&rdquo. Designed for centrifugally-spun cast and ductile iron pipe with OD&rsquos as shown in the table below.
All Socket Clamps include two half clamps, two bolts and nuts and two washers. Sizes 3&Prime through 12&Prime are supplied with #585 cast washers, which are shown below as replacement parts. Sizes 14&Prime and larger are supplied with two fabricated washers.
Used with all-thread rod and Trumbull tie-lugs or tie-bolts for joint restraint, shown
Qty:
Displaying: 1 - 23 of 23 Matching Items