L
1-gang
Part #:304966
- Extremely durable for hard-use institutional applications. Spring-loaded covers close automatically when plugs are removed. Die-cast copper-free aluminum construction. Stainless steel springs. Screws and spring covers are chrome-plated brass. Baked-on lacquer finish. Heavy rubber gaskets provide positive seal. All covers below are for 4 screw mounting only. Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
$
12.35
Qty:
Part #:503802
-
PIP® Superior Grade Split Cowhide Leather Welder's Glove with Cotton/Foam Lining and DuPont&trade Kevlar® Stitching
Side Split Cowhide leather construction provides comfort, durability, excellent abrasion resistance, and breathability
Side Split leather is durable and provides excellent protection due to its dense fibers
Fully welted to protect seams from abrasions
Stitched with Kevlar® adding strength and burn resistance
Cotton/foam lining gives welders additional heat protection but still absorbs moisture
One-piece back for extended glove life
Wing thumb increases comfort in open-handed work
Double reinforced palm and thumb strap increases durability and provides added protection at common wear points
Part #:504775
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:512251
-
Radians SJ11QB Class 3 weather proof Bomber Jacket with a quilted liner makes it very easy to slip on and off over other fleece or other warm outwear.
Quilted Liner 160g/m2
Color blocked bottom
2" silver reflective tape
PU coated weather proof 300D oxford polyester shell
Concealed attached hood
Elastic waistband and cuffs
Zippered, lined slash pockets
3D flap covered cell phone / radio chest pocket
Two lower zipper closure lined pockets
One inside open chest pocket
Mic tabs on both shoulders.
Qty:
Part #:512262
Qty:
Part #:512740
- Powder-Free Latex Gloves, Large, Natural, 4 4/5 mil, 1000/Carton
Eliminates potential aerosolization of glove powder and powder associated transfer of chemical allergens
Perfect combination of protection and sensitivity.
Enhanced strength and durability.
Quick and easy to don.
Improved tactile sensitivity with increased gripping characteristics
Part #:516622
- North Polar Insulated Leather Palm - 70/6465NK
High performance protection in cold weather. Thinsulate® liner provides excellent thermal protection, from temperatures down to -36° F (-38° C). Waterproof vinyl liner helps to prevent hands from getting wet. Gunn cut and wing thumb construction for wearer comfort.
Specifications
Construction
Gunn cut, wing thumb
Gauge / mil
NA
Glove Type
Thermal glove
Material
Split leather and cotton canvas
Material Color
Blue and yellow
Recommended for temperatures down to -36°F (-38°C)
Part #:303701
- One Gang Heavy Cast Aluminum Cover Duplex Receptacle Horizontal, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:303205
- WP BOX 1G 3 HOLE 1/2 WPB23
Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Qty:
Part #:506851
-
Cool, comfortable, and washable. Offers protection for light welding and from light sparks.
9 oz flame retardant 100% cotton Weldlite&trade fabric meets ASTM D6413-10
30" length
Relaxed fit design offers comfort for all-day wearability
Adjustable snap wrist, and large inside pocket
Leather reinforced, black anodized non-reflective snaps
Weldlite&trade high quality fabric is anti-static, rot and mildew resistant
Maintains its flame resistance for up to 50 home or 25 commercial washings
Sizes XS-6XL
Qty:
Part #:512240
-
Radians SJ01B-3 Type R, Class 3, Long Sleeve Hooded Sweatshirt with zipper closure offers superior warmth while keeping you visible. Color blocking at the bottom conceals dirt.
Black elastic knit waistband and cuffs.
Low Piling Polyester fleece material.
Color blocking at the bottom.
2&rdquo silver reflective tape.
Full front zipper closure.
Two lower pouch pockets.
Hood with adjustable pull cords.
Custom imprinting available on left chest and back center.
25 Wash Max.
Meets ANSI/ISEA 107-2015 Standards.
Qty:
Part #:512473
-
The Radians RWG22 Hi-Viz work glove provides excellent protection from abrasion. The seamless design of the 13 gauge, polyester shell with the polyurethane dipped palm provides protection in wet or dry conditions and a comfortable fit in hazardous applications.
Applications Construction, Assembly, Automotive, General Purpose, Manufacturing, Shipping, Warehousing
Qty:
closeout
$17.67 MSRP
$
11.88
Part #:512500
- CLOSEOUTS Only 1 Left!
- The RWG603 Cut Protection Sandy Foam Nitrile Coated Glove by Radians has an ANSI Cut rating of A5 and an EN388 cut rating of 5. The high visibility red sandy foam nitrile palm coating provides a strong grip in both wet and dry applications. The dense TPR overlays on the back of the hand provide added impact protection. This 13 gauge high performance glove is ideal for applications that need both cut and abrasion resistance along with the ability to grip objects.
Applications Petrochem Industry, Automotive, Construction, Manufacturing, Material Handling
Qty:
Part #:517554
- The Radians RWG605 cold weather glove provides EN388 level 5 protection and ANSI level 4 protection against cuts. The RWG605 features a 13 gauge knitted HPPE outer shell with a smooth blue latex coating and a 7 gauge Acrylic inner shell to provide extra protection and comfort. The palm has a black foam latex coating that provides excellent protection from abrasion in wet or dry, cold weather conditions.
Applications Cold Storage, Manufacturing, Frozen Food Processing, General Outdoor Activities
$
4.75
Qty:
Part #:307182
- Toggle Switch Openings, One Gang, 302/304 Stainless Steel
Type 302/304 Stainless Steel, non-magnetic .032''' nominal thickness.
Brushed finish.
This alloy contains 18% chromium and 8% nickel for superior resistance to corrosion.
Recommended for use in food processing plants, dairies, chemical plants, and other industrial, institutional, and commercial applications where corrosive atmospheres exist.
Standard, Jumbo, and Tandem plates available, as well as special Panel plates up to 5-gangs high and 10-gangs wide.
Packaged in protective film, with finish-matching screws.
Variety of special plated finishes.
Paintable to match plastic plates.
Can be silk-screened or engraved, and custom punched with over 300 opening styles.
Qty:
Part #:307185
- Duplex Receptacle Openings, One Gang, 302/304 Stainless Steel
Type 302/304 Stainless Steel, non-magnetic .032''' nominal thickness.
Brushed finish.
This alloy contains 18% chromium and 8% nickel for superior resistance to corrosion.
Recommended for use in food processing plants, dairies, chemical plants, and other industrial, institutional, and commercial applications where corrosive atmospheres exist.
Standard, Jumbo, and Tandem plates available, as well as special Panel plates up to 5-gangs high and 10-gangs wide.
Packaged in protective film, with finish-matching screws.
Variety of special plated finishes.
Paintable to match plastic plates.
Can be silk-screened or engraved, and custom punched with over 300 opening styles.
Qty:
Part #:307154
- Blank Plates, Box Mounted, One Gang, Ivory
Molded of rugged, practically indestructible self-extinguishing nylon. ('TP' series only.)
Available in 'TP' series, extra 3/16 inch width and height than Standard size plates and 'TPJ' series, extra 3/16 inch width and height than Junior-Jumbo size plates.
Available in Ivory, White, Brown, Gray, Black, Blue, Orange, Red, and Light Almond.
Preferred for hospital, industrial, institutional, and other high-abuse applications.
Nominal thickness, .070 inch.
cULus ListingNumber 143222
Qty:
Part #:300310
- Single Gang Cast While-In-Use Cover, Gray
Compliant with National Electric Code (NEC) Section 406.8(B)(1) for wet locations.
UL listed for ''Extra-Duty'' applications.
Heavy cast aluminum construction.
Corner hinge allows for vertical or horizontal mounting.
Device inserts allow for multiple device types.
Install without removing electrical device thanks to keyed mounting holes.
Cord flap gaskets inhibit water splash and insects, all gaskets are factory installed.
Accepts padlocks.
Qty:
Part #:303196
- One Gang Blank Cover, Brushed Aluminum
Designed for both interior and exterior applications.
Universal aluminum mounting plates.
Gray, bronze and white models have baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
CSA File Number 17695
Qty:
Part #:307371
- Weatherproof Single Gang Box, Gray
Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:300341
- Power Outlet Receptacle Openings, One Gang, 302/304 Stainless Steel
Type 302/304 Stainless Steel, non-magnetic .032''' nominal thickness.
Brushed finish.
This alloy contains 18% chromium and 8% nickel for superior resistance to corrosion.
Recommended for use in food processing plants, dairies, chemical plants, and other industrial, institutional, and commercial applications where corrosive atmospheres exist.
Standard, Jumbo, and Tandem plates available, as well as special Panel plates up to 5-gangs high and 10-gangs wide.
Packaged in protective film, with finish-matching screws.
Variety of special plated finishes.
Paintable to match plastic plates.
Can be silk-screened or engraved, and custom punched with over 300 opening styles.
Qty:
Part #:303227
- Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
Qty:
Displaying: 1 - 24 of 68 Matching Items