Pass & Seymour (Legrand)
Logistics Supply
View:
Active Filters :
- Brand: Logistics Supply Pass & Seymour (Legrand) Tingley
- CSA Listings Info: C22.2 No. 42; C22.2 No. 223 C22.2 No. 42M Yes
Part #:304331
- 20A Double Pole, Double Throw Switch, Brown
Oversize silver alloy contacts for long life and better heat dissipation.
Side wired terminals accept #14 - #10 AWG copper or copper-clad conductors.
Fiber terminal insulation barriers standard.
Can be mounted in standard device boxes or in NEMA 1 sheet steel enclosures.
Bodies, covers, and toggles molded of durable nylon.
Single Pole-Double Throw and Double Pole-Double Throw.
Locking Switches supplied with one 1498-NT key.
Normally open.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
CSA File Number 17949
Qty:
Part #:304966
- Extremely durable for hard-use institutional applications. Spring-loaded covers close automatically when plugs are removed. Die-cast copper-free aluminum construction. Stainless steel springs. Screws and spring covers are chrome-plated brass. Baked-on lacquer finish. Heavy rubber gaskets provide positive seal. All covers below are for 4 screw mounting only. Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
$
12.35
Qty:
Part #:304701
- Weatherproof Cover for Flanged Inlet/Outlet
Unbreakable glass-filled polycarbonate construction to withstand years of job site abuse and harsh environmental exposure.
Stainless steel mounting screws also resist corrosion.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
Molded-in label area (2.8 sq. in.) for pre-printed or handwritten labels for identification of circuits, ratings and other application data.
WPG1 and WPG2 have lockable bullnose for OSHA locktag/tagout compliance.
Covers fit all competitive inlets and outlets.
Pre-attached gaskets for easy installation and tight seal to panel or weatherproof box -- with no misaligned or collapsed gaskets.
Tamper-proof hinge features permanent, locked-in pins for added security.
cULus ListingNumber 143222
Qty:
Part #:303020
- 20A NEMA Plug L1520 - Black Ba
Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
Raised ribs provide non-slip gripping profile for turning to lock and unlock.
Double dovetail design provides superior protection against cord pull-out forces.
Impact- and corrosion-resistant durable nylon 6 shell material.
Rounded back contour reduces snags and hang-ups on the job site.
Scallop shell design provides non-slip gripping surface for insertion and withdrawal.
Visible stamped NEMA configuration and device rating.
New-design external cord grips provide visible assurance of safe and proper cord retention.
Integral flexible rubber cord grommet conforms to and seals around SO cord to provide protection from oils, water, or chips entering wiring chamber.
ck, White Front Body
cULus ListingNumber 146159
Qty:
Part #:303701
- One Gang Heavy Cast Aluminum Cover Duplex Receptacle Horizontal, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:300771
- MaxGrip M3 Plug, Yellow
Tough nylon construction with crush / impact resistance that exceeds hospital grade and Fed Spec requirements arc resistance exceeds UL requirements.
Self-hinge swings wide open to make quick, easy work of light, clean connections. Insert conductors into terminals and tighten terminal screws close hinge housing around cord and tighten housing screws.
Enclosed terminals provide solid, internally-clamped connections.
Molded finger grips promote safe, sure handling.
High-visibility yellow and orange, or gray.
Hospital Grade version displays the Hospital Grade green dot.
For covering patents, see www.legrand.us/patents.
Qty:
Part #:301076
- Strain Relief Deluxe Cord Grips, 3/4-in NPT, Straight Male
Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance.
They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain.
They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets.
Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2 Class II, Div. 1 & 2 and Class III, Div. 1 & 2.
CSA File Number 67507
Qty:
Part #:303616
- Strain Relief Deluxe Cord Grips, 3/4-in
Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance.
They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain.
They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets.
Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2 Class II, Div. 1 & 2 and Class III, Div. 1 & 2.
PT, Straight Male
CSA File Number 67507
Qty:
Part #:307182
- Toggle Switch Openings, One Gang, 302/304 Stainless Steel
Type 302/304 Stainless Steel, non-magnetic .032''' nominal thickness.
Brushed finish.
This alloy contains 18% chromium and 8% nickel for superior resistance to corrosion.
Recommended for use in food processing plants, dairies, chemical plants, and other industrial, institutional, and commercial applications where corrosive atmospheres exist.
Standard, Jumbo, and Tandem plates available, as well as special Panel plates up to 5-gangs high and 10-gangs wide.
Packaged in protective film, with finish-matching screws.
Variety of special plated finishes.
Paintable to match plastic plates.
Can be silk-screened or engraved, and custom punched with over 300 opening styles.
Qty:
Part #:307233
- 15A, 125V Watertight Straight Blade Plug, Yellow
Thermoplastic elastomer (TPV) construction stands up to impacts, oils, chemicals, heat and weather.
Nickel-plated blades and contacts for long-lasting, superior corrosion resistance.
Devices resist high-pressure hose down of 1,500 psi.
Color-coded sealing bushings provided for a large range of cord diameters.
Large ribs on body for a superior grip when mating.
For covering patents, see www.legrand.us/patents.
CSA File Number 701645
Qty:
Part #:307235
- 15A, 125V Rubber Dust-Tight Plug, Yellow
Rubber body construction stands up to impacts, oils, chemicals, heat, and weather.
Floating blades allow self-alignment with contacts for a firm, even electrical connection.
Terminal screws backed-out, ready-to-wire, saving time and money.
Nickel-plated blades and contacts for long-lasting, superior corrosion resistance.
Quick-drive assembly screws allow for fast installation, saving time and money.
Self-centering cord clamps provide superior strain relief.
For covering patents, see www.legrand.us/patents.
CSA File Number 701645
Qty:
Part #:307236
- 15A, 125V Rubber Dust-Tight Connector, Yellow
Rubber body construction stands up to impacts, oils, chemicals, heat, and weather.
Floating blades allow self-alignment with contacts for a firm, even electrical connection.
Terminal screws backed-out, ready-to-wire, saving time and money.
Nickel-plated blades and contacts for long-lasting, superior corrosion resistance.
Quick-drive assembly screws allow for fast installation, saving time and money.
Self-centering cord clamps provide superior strain relief.
For covering patents, see www.legrand.us/patents.
CSA File Number 701645
Qty:
Part #:303395
- Thermoplastic Weatherproof Covers for Flanged Inlet/Outlet
Unbreakable glass-filled polycarbonate construction to withstand years of job site abuse and harsh environmental exposure.
Stainless steel mounting screws also resist corrosion.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
Molded-in label area (2.8 sq. in.) for pre-printed or handwritten labels for identification of circuits, ratings and other application data.
WPG1 and WPG2 have lockable bullnose for OSHA locktag/tagout compliance.
Covers fit all competitive inlets and outlets.
Pre-attached gaskets for easy installation and tight seal to panel or weatherproof box -- with no misaligned or collapsed gaskets.
Tamper-proof hinge features permanent, locked-in pins for added security.
cULus ListingNumber 143222
Qty:
Part #:307371
- Weatherproof Single Gang Box, Gray
Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:303230
- Weatherproof Two Gang Box, Gray
Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:305445
- Power Outlets
cULus ListingNumber 140596
Qty:
Part #:303060
- Power Outlets
cULus ListingNumber 140596
Qty:
Part #:301060
- Strain Relief Deluxe Cord Grips, 1/2-in NPT, Straight Male
Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance.
They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain.
They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets.
Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2 Class II, Div. 1 & 2 and Class III, Div. 1 & 2.
CSA File Number 67507
Qty:
Part #:307192
- Power Outlet Receptacle Openings, Two Gang, 302/304 Stainless Steel
Type 302/304 Stainless Steel, non-magnetic .032''' nominal thickness.
Brushed finish.
This alloy contains 18% chromium and 8% nickel for superior resistance to corrosion.
Recommended for use in food processing plants, dairies, chemical plants, and other industrial, institutional, and commercial applications where corrosive atmospheres exist.
Standard, Jumbo, and Tandem plates available, as well as special Panel plates up to 5-gangs high and 10-gangs wide.
Packaged in protective film, with finish-matching screws.
Variety of special plated finishes.
Paintable to match plastic plates.
Can be silk-screened or engraved, and custom punched with over 300 opening styles.
Qty:
Part #:300341
- Power Outlet Receptacle Openings, One Gang, 302/304 Stainless Steel
Type 302/304 Stainless Steel, non-magnetic .032''' nominal thickness.
Brushed finish.
This alloy contains 18% chromium and 8% nickel for superior resistance to corrosion.
Recommended for use in food processing plants, dairies, chemical plants, and other industrial, institutional, and commercial applications where corrosive atmospheres exist.
Standard, Jumbo, and Tandem plates available, as well as special Panel plates up to 5-gangs high and 10-gangs wide.
Packaged in protective film, with finish-matching screws.
Variety of special plated finishes.
Paintable to match plastic plates.
Can be silk-screened or engraved, and custom punched with over 300 opening styles.
Qty:
Part #:304256
- Fluorescent Starter
CSA File Number 7145
Qty:
Part #:304580
- Dustproof Stainless Steel Cover
Stainless Steel Covers are dustproof only and do not meet NEC 406.8(A) or (B).
Exclusive -- Spec-grade stainless steel covers.
Ideal for hard-use and corrosive applications.
Aesthetically pleasing.
CSA File Number 17695
Qty:
Part #:303105
- Toggle Switch Openings, One Gang, Ivory
Molded of non-combustible mar-proof material.
Available in 'SP' series in Standard, Junior-Jumbo, and Jumbo sizes.
Seven standard colors available -- Ivory, White, Brown, Gray, Black, Red, and Light Almond.
Individually wrapped with color-matching screws.
Resistant to discoloration, grease, oil, solvent, and moisture.
Nominal thickness, .070 inch.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:303106
- Toggle Switch Openings, One Gang, White
Molded of non-combustible mar-proof material.
Available in 'SP' series in Standard, Junior-Jumbo, and Jumbo sizes.
Seven standard colors available -- Ivory, White, Brown, Gray, Black, Red, and Light Almond.
Individually wrapped with color-matching screws.
Resistant to discoloration, grease, oil, solvent, and moisture.
Nominal thickness, .070 inch.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Displaying: 1 - 24 of 64 Matching Items