Milwaukee Tools
Appleton
View:
Active Filters :
- Brand: Appleton Milwaukee Tools
- Size: 1-1/4in 4-1/2in
Part #:302655
- Appleton and O-Z/Gedney offer ETP 5000S Series steel EMT set screw couplings. They are used to ground and secure EMT raceway sections together
$
3.18
Qty:
Part #:302735
- Appleton EY 25% fill vertical and horizontal conduit sealing fittings prevent the passage of gases vapors or flames from one portion of a conduit system to another. They also restrict large amounts of ignitable gases or vapors from accumulating to confine explosive pressure. Appleton sealing fittings are explosionproof dust-ignitionproof and raintight. They are suitable for use in Class I and II locations.
$
55.45
Qty:
Part #:305735
- Appleton and O-Z/Gedney Hang-On hangers are designed secure rigid metal conduit IMC or EMT to threaded rod supports or directly to mounting surfaces.
$
1.76
Qty:
Part #:307122
- O-Z/Gedney threaded three piece couplings join two lengths of conduit when neither can be turned. Elbows provide a 90 change of direction in a conduit run. Gasket elbows also provide a compact wire pulling point.
$
26.95
Qty:
Part #:307975
- Appleton liquidtight STF Series connectors with threaded hubs are female ST Series connectors. They are designed to be used when making connection from liquidtight flexible metal conduit to threaded rigid conduit and IMC. The compact design results in a connector that offers a small turning radius.
$
24.89
Qty:
Part #:308001
- Appleton aluminum liquidtight ST Series connectors with plain throat provide a dependable connection for liquidtight flexible metal conduit. Their lightweight aluminum construction facilitates installation. The compact design results in a connector that offers a small turning radius. They seal out oil water dust dirt and fumes.
$
49.23
Qty:
Part #:288220
- M18 FUEL&trade 4-1/2" / 5" Braking Grinder (Tool Only)
The world's first cordless braking grinder stops accessories in under 2 seconds, delivers the power of a corded grinder, and has up to 10X longer tool life. The M18 FUEL&trade 4-1/2" / 5" Grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications. The POWERSTATE&trade Brushless Motor provides up to 10X longer motor life and lower cost of ownership. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack delivers up to 4X more run time and 20% more power. The grinder features REDLINK PLUS&trade Intelligence, the most advanced system of cordless power tool electronics, for maximum performance. A Rapid Stop Brake feature stops accessories in under 2 seconds. The 18-volt lithium-ion grinder&rsquos thin body design gives it optimized balance to rest easily in your hands. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work. The grinder is built with the same tool body, gearing system and anti-vibration side handle as Milwaukee&rsquos legendary high-performance corded grinders for maximum durability on the job. The kit includes 2 M18&trade REDLITHIUM&trade XC5.0 Extended Capacity Battery Packs, a multi-voltage charger and carrying case. Grinding wheel sold separately.
Qty:
Part #:729-2882-22
- M18 FUEL&trade 4-1/2" / 5" Braking Grinder w/ ONE-KEY&trade Paddle Switch, No Lock
Our M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade Paddle Switch, No Lock Kit is the next advancement in power and performance of cordless grinders while enhancing safety with its RAPIDSTOP&trade Brake. The M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade generates 11A corded power to complete the toughest grinding and cutting applications. The POWERSTATE&trade Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS&trade Intelligence ensures unmatched levels of performance, protection, and compatibility. The RAPIDSTOP&trade Brake provides stop times under 2 seconds with an abrasive disc. Our M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Compatible with ONE-KEY&trade, this grinder wirelessly connects to a smartphone to track and manage the tool, providing you with visibility to where tools are across your network of jobs. The included M18&trade REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Batteries deliver 50% more power while running 50% cooler than the M18&trade REDLITHIUM&trade XC Batteries. Experience faster accessory changes, and less downtime with tool-free accessory and guard adjustments, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade is the next level of jobsite productivity and enhanced safety in cordless grinders.
Qty:
Part #:302027
- Appleton and O-Z/Gedney offer ETP 4000S Series steel EMT set screw connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 4000S Series have a male NPS threaded hub and are available with or without an insulated throat.
$
2.74
Qty:
Part #:303946
- Appleton and O-Z/Gedney K-clamps are designed to secure rigid metal conduit IMC or EMT. They can be used across parallel or perpendicular to beam channel and angle supports.
$
12.78
Qty:
Part #:303990
- Appleton and O-Z/Gedney K-clamps are designed to secure rigid metal conduit IMC or EMT. They can be used across parallel or perpendicular to beam channel and angle supports.
$
7.38
Qty:
Part #:306852
- Appleton combination couplings are used to couple flexible metal conduit to EMT conduit. Their armored cable and flexible metal conduit connectors are used to ground and secure armored ground wire armored cable nonmetallic sheathed cable and flexible metal conduit to boxes and enclosures
$
18.01
Qty:
Part #:306866
- Appleton combination couplings are used to couple flexible metal conduit to EMT conduit. Their armored cable and flexible metal conduit connectors are used to ground and secure armored ground wire armored cable nonmetallic sheathed cable and flexible metal conduit to boxes and enclosures.
$
37.74
Qty:
Part #:306951
- Appleton and O-Z/Gedney rigid conduit and IMC locknuts are used to secure and ground conduits and fittings to enclosures and prevents loosening due to vibration or motion. They are available in plain gasketed and bonding styles.
$
1.48
Qty:
Part #:306982
- Appleton and O-Z/Gedney conduit bushings are used with a locknut to terminate rigid metal conduit or IMC conduit to a box or enclosure. They provide a smooth pulling surface for wires.
$
1.28
Qty:
Part #:307010
- Appleton and O-Z/Gedney metallic knockout blanks and fixture stems are widely recognized for quality selection and ease of installation. They may be used as a junction box or a device box for switches receptacles GFCIs etc. Manufactured of durable materials with consistent construction means easy installation making all the difference in the speed and final quality of any wiring job.
$
1.86
Qty:
Part #:307067
- Appleton and O-Z/Gedney threaded enlargers are used to adapt an outlet hole to the next larger size of conduit. The offset nipples provide box to box connection of knockouts and allows misaligned knockout connection by rolling the offset nipple until aligned with each knockout. Bushed nipples are used through knockouts to connect box to conduit coupling. They can be used with a locknut to connect two boxes side by side or back to back or to connect fixture housings and continuous runs.
$
4.87
Qty:
Part #:307200
- O-Z/Gedney threaded three piece couplings join two lengths of conduit when neither can be turned. Elbows provide a 90 change of direction in a conduit run. Gasket elbows also provide a compact wire pulling point.
$
31.85
Qty:
Part #:307352
- Appleton offers beam clamps straps clamps and clamp backs for rigid metal conduit or imc. Beam clamps provide support for conduit hanging systems. Two-hole straps are used to support rigid metal conduit and IMC. Clamp backs provide spacing from mounting surfaces when they are used with pipe clamps.
$
1.73
Qty:
Part #:307366
- Appleton offers beam clamps straps clamps and clamp backs for rigid metal conduit or imc. Beam clamps provide support for conduit hanging systems. Two-hole straps are used to support rigid metal conduit and IMC. Clamp backs provide spacing from mounting surfaces when they are used with pipe clamps.
$
0.90
Qty:
Part #:308182
- O-Z/Gedney offers clamps and straps. They are used to secure oval/round cables or support runs of rigid metal conduit IMC and EMT.
$
0.59
Qty:
Part #:308316
- Appleton Form 35 Malleable Iron Conduit Outlet Bodies Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintenance.
$
47.02
Qty:
Part #:300740
- Appleton Form 85 Unilets Conduit Outlet Bodies Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintenance
$
30.64
Qty:
Part #:300840
- Appleton and O-Z/Gedney K-clamps are designed to secure rigid metal conduit IMC or EMT. They can be used across parallel or perpendicular to beam channel and angle supports.
$
2.60
Qty:
Displaying: 1 - 24 of 57 Matching Items