Milwaukee Tools
Appleton
View:
Active Filters :
- Brand: Appleton Milwaukee Tools
- Size: 4in 175w
Part #:521570
- 4" Full Cable Twist Knot Wheel - Stainless Steel
The Full Cable Twist Knot Wire Wheel is designed for general heavy duty cleaning of scale, surface oxidation, rubber flash, heavy burrs and weld splatter. Full Cable Twist Knot Wire Wheels are available in carbon and stainless steel. This Cable Knot Wire Wheel is designed for use with 4-1/2 or 5 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made of stainless steel.
Qty:
Part #:500204
- 4" Knot Wire Cup Brush - Carbon Steel
For lighter duty surface cleaning a Crimped style Cup Brush is appropriate. Crimped wire is less rigid than knotted and can get into crevices more easily. Milwaukee offers a full range of Crimp and Knotted Wire Cup Brushes. This Crimp Wire Cup Brush is designed to be used on 9 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made from carbon steel wire.
Qty:
Part #:729-48-52-5000
-
4" Stringer Bead Wheel - Stainless
For lighter duty surface cleaning a Crimped style Cup Brush is appropriate. Crimped wire is less rigid than Knotted and can get into crevices more easily. Milwaukee offers a full range of Crimp and Knotted Wire Cup Brushes. This Crimp Wire Cup Brush is designed to be used on 7 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made from carbon steel wire.
Qty:
Part #:503172
- 4" Full Cable Twist Knot Wheel - Carbon Steel
For lighter duty surface cleaning a Crimped style Cup Brush is appropriate. Crimped wire is less rigid than Knotted and can get into crevices more easily. Milwaukee offers a full range of Crimp and Knotted Wire Cup Brushes. This Crimp Wire Cup Brush is designed to be used on 7 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made from carbon steel wire.
Qty:
Part #:304003
- Appleton and O-Z/Gedney K-clamps are designed to secure rigid metal conduit IMC or EMT. They can be used across parallel or perpendicular to beam channel and angle supports.
$
21.79
Qty:
Part #:300864
- Appleton and O-Z/Gedney K-clamps are designed to secure rigid metal conduit IMC or EMT. They can be used across parallel or perpendicular to beam channel and angle supports
$
8.51
Qty:
Part #:301655
- Appleton and O-Z/Gedney metallic 4 octagon boxes extension rings and covers are widely recognized for quality selection and ease of installation. They may be used as a junction box or a device box for switches receptacles GFCIs etc. Manufactured of durable materials with consistent construction means easy installation making all the difference in the speed and final quality of any wiring job.
$
26.70
Qty:
Part #:302553
- Appleton and O-Z/Gedney offer ETP 4000S Series steel EMT set screw connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 4000S Series have a male NPS threaded hub and are available with or without an insulated throat.
$
30.33
Qty:
Part #:302840
- Appleton HUB threaded conduit hubs are general purpose fittings designed for RMC and IMC. They provide a more vibration resistant connection with assured ground continuity. The HUB design is an insulated throat form with a bonding screw. The o-ring provides a watertight connection between the hub and an enclosure.
$
156.34
Qty:
Part #:304014
- Appleton and O-Z/Gedney offer ETP 5000S Series steel EMT set screw couplings. They are used to ground and secure EMT raceway sections together.
$
20.93
Qty:
Part #:306957
- Appleton and O-Z/Gedney rigid conduit and IMC locknuts are used to secure and ground conduits and fittings to enclosures and prevents loosening due to vibration or motion. They are available in plain gasketed and bonding styles.
$
24.63
Qty:
Part #:307130
- O-Z/Gedney threaded three piece couplings join two lengths of conduit when neither can be turned. Elbows provide a 90 change of direction in a conduit run. Gasket elbows also provide a compact wire pulling point.
$
414.51
Qty:
Part #:307360
- Appleton offers beam clamps straps clamps and clamp backs for rigid metal conduit or imc. Beam clamps provide support for conduit hanging systems. Two-hole straps are used to support rigid metal conduit and IMC. Clamp backs provide spacing from mounting surfaces when they are used with pipe clamps.
$
16.37
Qty:
Part #:308324
- Appleton Form 35 Malleable Iron Conduit Outlet Bodies Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintenance.
$
483.89
Qty:
Part #:308421
- Appleton Form 85 Unilets Conduit Outlet Bodies Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintenance.
$
34.57
Qty:
Part #:729-48-52-1300
-
4" Crimped Wire Cup Brush- Carbon Steel
For lighter duty surface cleaning a Crimped style Cup Brush is appropriate. Crimped wire is less rigid than Knotted and can get into crevices more easily. Milwaukee offers a full range of Crimp and Knotted Wire Cup Brushes. This Crimp Wire Cup Brush is designed to be used on 7 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made from carbon steel wire.
Qty:
Part #:521670
- 4" Stringer Bead Wheel - Carbon Steel
For maximum weld cleaning in confined area, the narrow faced Stringer Bead Wheel provides aggressive action. A tight twist provides the narrow profile with the required stiffness to clean pipe joints in fabrication shops and pipeline maintenance. Stringer Bead Wheels are available in both carbon and stainless steel. This Stringer Bead Wheel is designed for use on 4-1/2 or 5 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made of stainless steel.
Qty:
Part #:506641
- 4" Radial Crimped Wheel- Carbon Steel
The Crimped Wire Brush is suited for general purpose surface cleaning and conditioning. Milwaukee offers Crimped Wire Wheels in both carbon and stainless steel. The brush is designed for use on 4-1/2 or 5 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made of carbon steel.
Qty:
Part #:805210
- 4" 14 TPI SAWZALL® Blades (5 Pk)
Thin Kerf metal-cutting blades with the Double Duty Upgrade&trade feature a tooth form that is optimized for the longest life and increased speed. Tough Neck&trade is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Maintaining a short profile and thin body, these blades are ideal for making fast, flexible cuts.
Qty:
Part #:504347
- 1/4" x 4" High Speed Steel Pilot Bit
Qty:
Part #:805349
- 4" Diamond Cup Wheel Double Row
MILWAUKEE® Diamond Cup Wheels are designed to the highest standards, only using quality diamonds. Available in sizes 4", 5", and 7", Diamond cup wheels are designed for fast removal, shaping, and smoothing of concrete, masonry, and stone. MILWAUKEE® provides cup wheels in Single-Row, Double-Row, and Segmented-Turbo.
Qty:
Part #:729-49-93-8006
-
4" Diamond Premium Turbo
Milwaukee Diamond Blades are designed to the highest standards, only using quality diamonds. Available in sizes 4"-14". Milwaukee's Diamond Blade line will cover a full range of materials including specialized blades for Green Concrete, Asphalt and Ductile Iron. All Milwaukee Blades are designed for both wet and dry cutting.
Qty:
Part #:805348
- 4" Diamond Universal segmented-turbo
Milwaukee Diamond Universal blades are designed to the highest standards, only using quality diamonds. For use in a wide range of applications. This blade is ideal for cutting reinforced concrete, concrete, brick, block, green concrete, asphalt, stone, and granite. All Milwaukee Blades are designed for both Wet and Dry Cutting.
Qty:
Part #:729-49-93-7700
- Business Unit Accessories. Product Level 1 Accessories Abrasives. Product Level 2 Accessories Abrasives. Product Level 3 ACCY Diamond Cutting. Product Level 4 ACCY Material Removal. Product Level 5 ACCY One (1) Packs. AX Item Number 49937700. Country of Origin CHN. Harmonized Tariff 6804224000.:
Qty:
Displaying: 1 - 24 of 25 Matching Items