Milwaukee
Greenlee
Part #:504747
- A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is soft and flexible so it handles curves and contours.
Installation takes only minutes and removal of the sealant is simple and involves no scraping or grinding. It is sold in continuous lengths so that it can be cut off in various lengths.
Part #:800024
- ML402 features a blend of synthetic fibers treated with specially formulated lubricants with a saxoline base.
The lubrication formulation makes the extra difference. The ductile nature of the lubricant prevents wicking and provides superior sealability.
The packing is constructed with a Multi-Lok braid and each strand is individually coated with graphite. The packing receives a final secondary surface coating of graphite.
Part #:800292
- A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is soft and flexible so it handles curves and contours.
Installation takes only minutes and removal of the sealant is simple and involves no scraping or grinding. It is sold in continuous lengths so that it can be cut off in various lengths.
Part #:800552
- A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is soft and flexible so it handles curves and contours.
Installation takes only minutes and removal of the sealant is simple and involves no scraping or grinding. It is sold in continuous lengths so that it can be cut off in various lengths.
Part #:801552
- A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is soft and flexible so it handles curves and contours.
Installation takes only minutes and removal of the sealant is simple and involves no scraping or grinding. It is sold in continuous lengths so that it can be cut off in various lengths.
Part #:500594
- 1-1/8" Step Bit (#9)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2" drill chucks
Laser markings for quick, easy product and size identification.
Replaced 30008
Also available for sale in a carton, qty. 25 (Cat # GSB09-B UPC # 783310082071)
$
71.95
Qty:
Part #:500536
- 1/2" Step Bit (#1)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provide balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34401
Also available for sale in a carton, qty. 25 (Cat # GSB01-B UPC # 783310082057)
Qty:
Part #:500574
- 7/8" Step Bit (#4)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34403
Also available for sale in a carton, qty. 25 (Cat # GSB04-B UPC # 783310082040)
$
55.05
Qty:
Part #:521244
- Extended DTAP Kit
Complete hole drilling, tapping and deburring/countersinking in one operation using power drill to save time and labor
Back tapered beyond tap to prevent thread damage from over-drilling
Made from hardened high-speed steel versus carbon-steel for longer life
High wuality hex shank to ensure strong connection to drill chuck
Designed to tap up to 10 gauge metal
Quick change adaptor included
$
72.00
Qty:
Part #:510307
- 240' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Fish tape is available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
$
115.80
Qty:
Part #:801544
- Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties.
No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
Part #:805892
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:501682
- Slug-Buster® 1/2" Conduit Size Replacement Punch
Made in USA
Alignment Markings improve punching accuracy and productivity
Punches and dies are clearly marked for quick part identification
$
34.30
Qty:
Part #:504951
- Standard Round 1/2" - 1-1/4" Manual Knockout Set
For use with new Greenlee KRW-1 high-leverage ratchet wrench
Slug-Buster® punch profile splits slugs for easy slug removal
Knurled edge on punches for better grip
New die design optimized for widest range of materials and drivers
Easy threading - draw studs with "dog point" tip helps eliminate cross-threading.
Knockout set punches, dies and case made in the USA
Draw stud manufactured in the USA from US and global components
Laser markings for quick part identification. Alignment markings for improved accuracy.
$
299.00
Qty:
Part #:807974
- 11/16 x 18 Nail Eater® Bit
Improved cutting edge provides 30% longer life span
Patented new design for improved cutting and cleaner holes
Self-feeding screw point draws bit through wood
Unique patented design cutting angle - smoother starts, reduced cutting loads
Made of super tough, heat-treated steel
Cuts through nails and provides longer life
Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s
See Bit Extensionsif more length is required
P.O.P packaged
$
34.45
Qty:
Part #:500437
- 1/2" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Laser markings for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 60246
$
60.60
Qty:
Part #:500493
- 3/4" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Knockout sets are laser marked for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 7211BB-3/4
$
78.75
Qty:
Part #:811000
- Pro Stainless Wire Stripper / Cutter / Crimper
High grade stainless steel lasts 5X longer
Precision ground stripping holes offer easy, consistent jacket removal
Strips 10-18 AWG Solid and12-20 AWG Stranded conductors
Cleanly shears 6-32 and 8-32 bolts
Crimps 16-10 insulated and non-insulated terminals
Multiple functions include plier nose, strippers, cutter, looping holes, crimper, bolt re-thread/shear and spring back with low profile lock
Looping holes and serrated nose for bending, pulling and shaping wires
Long-life spring and low-profile lock for quick, repetitive stripping and cutting
Vinyl cushion grip resists slipping and has an ergonomic fit
$
24.65
Qty:
Part #:800174
- ML4002 is engineered with finely ground particles of the highest quality graphite in a PTFE matrix to control graphite migration. SEPCO ML4002 is 100% GFO fibers with the W. L. Gore seal of approval.
This Comp packing is an excellent, all around packing exhibiting good thermal conductivity characteristics resulting in higher shaft speed, feet-per-minute (fpm) ratings.
Part #:800260
- ML4002 is engineered with finely ground particles of the highest quality graphite in a PTFE matrix to control graphite migration. SEPCO ML4002 is 100% GFO fibers with the W. L. Gore seal of approval.
This Comp packing is an excellent, all around packing exhibiting good thermal conductivity characteristics resulting in higher shaft speed, feet-per-minute (fpm) ratings.
Part #:800290
- A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is soft and flexible so it handles curves and contours.
Installation takes only minutes and removal of the sealant is simple and involves no scraping or grinding. It is sold in continuous lengths so that it can be cut off in various lengths.
Part #:800545
- Multi-Lok braided high-purity carbon fibers made from a PAN base, with a minimum carbon content of 95.0%. (Staple fibers from PAN produce a more flexible packing than filament fibers, which tends to fracture when bent. Each individual strand is coated with pure PTFE and cured before braiding. During the braiding process, pure PTFE is applied throughout the body of the packing. The packing is lubricated under hydraulic pressure with a proprietary nonpetroleum lubricant, containing no sulfur, silicone, or waxes.
Part #:800546
- Multi-Lok braided high-purity carbon fibers made from a PAN base, with a minimum carbon content of 95.0%. (Staple fibers from PAN produce a more flexible packing than filament fibers, which tends to fracture when bent. Each individual strand is coated with pure PTFE and cured before braiding. During the braiding process, pure PTFE is applied throughout the body of the packing. The packing is lubricated under hydraulic pressure with a proprietary nonpetroleum lubricant, containing no sulfur, silicone, or waxes.
Part #:801543
- Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties.
No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
Displaying: 1 - 24 of 95 Matching Items