Milwaukee
A. Y. McDonald Water Works
View:
Active Filters :
Part #:101904
- Cord SolidsModel 5020PUUP 1/5 HP 120 Volts 60 Hz 3.6 Amps Thermoplastic Construction Discharge Size 1 1/4in Cord Length 10ft Solid Handling 1/8in 3450 RPM Single Phase:
Qty:
Qty:
Qty:
Part #:707045
- No-Lead 125# Brass Threaded Fittings. Brass Hex Reducing Bushing - No-Lead
- NSF / ANSI 61-4 & NSF / ANSI 372
A.Y. McDonald Mfg. Co. No-Lead Pipe Fittings & Nipples are constructed from heavy duty brass and are rated for commerical, industrialand residential applications up to 125 WOG. Threads conform to ANSI B1.20.1 and fitting dimensions comply with ANSI B16.15.
Qty:
Part #:101970
- Mechanically activated, wide angle switch for direct control of pumps up to 1/2 HP at120V and 1 HP at 230V.
Qty:
Part #:701122
- SUBMITTAL INFORMATION - Sizes:
- 1/4”, 3/8”, 1/2”, 3/4”, 1”- 25 PSIG- NOTE
Qty:
Part #:507333
- 67362 V & B Supreme Replacement Handle for 10# to 16# Sledge Hammers. Eye Size 1-3/8" x 1". Length 36". Includes one wood wedge, one steel wedge and instructions. MADE IN USA.
$
13.88
Qty:
Part #:101902
- Model 5025PVSP 1/4 HP 120 Volts 60 Hz 3.8 Amps Thermoplastic Construction 1 1/4” or 1 1/2” Size 10’ Length Cord Handling 1/8” Solids 3450 RPM Single Phase :
Qty:
Part #:200145
- SUBMITTAL INFORMATION Static Head:
- Min 2ft. / Max 10 ft. static head over check valvePressure Test
Qty:
Qty:
Part #:506907
- The 16oz 99 hammers are based on a unique rip hammer design originated by Vaughan. The extra steel behind the striking face, and the deep throat, octagon neck and smoothly swept claws creates a hammer that looks as good as it feels in use. Rust-resistant powder coat finish. MADE IN USA.
Qty:
Part #:506922
- R99 has Polished striking head, sides and claw. Octagon neck and round face. Forged steel from head to heel. Exclusive, Shock-Blok&trade plug in head absorbs shock. Non-slip cushioned PVC grip is molded to handle. "MADE IN THE USA".
Qty:
Part #:507326
- Supreme Hickory replacement handle for 2 lb to 4 lb Blacksmith Hammer. Oval Eye 1 inch x 3/4 inch. Overall length 16 inches. One wood wedge, two steel wedges and instructions included. MADE IN USA.
Qty:
Part #:508143
- DB200 Heads are partially filled with steel shot to increase impact and reduce rebound. The one-piece threaded faces feature a shoulder to absorb the force of side blows, protecting the threads. The one-piece, aluminum alloy heads are serrated to help keep the faces tight. A neoprene compound grip on the handle absorbs shock. Supplied with two white nylon faces. MADE IN ENGLAND.
Qty:
Part #:701356
- A.Y. McDonald Mfg. Co. No-Lead Low Pressure Valves are constructed from heavy duty no-lead brass and are recommended for residential and commercial applications and positive shut-off with various inlet configurations.:
Qty:
closeout
$280.59 MSRP
$
218.41
Part #:701136
- CLOSEOUTS Only 3 Left!
- SUBMITTAL INFORMATION - Sizes:
- 1/4”, 3/8”, 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”- 25 PSIG- NOTE
Qty:
Part #:506962
- HD3 3 LB Hand Driller the right hammer for striking star drills, cold chisels, brick chisels and punches. Broad, polished striking faces with generous bevels. Rust-resistant powder coat finish on smooth ground sides. Select, hickory handle. MADE IN USA.
Qty:
Part #:507311
- 61162 Supreme Adze Eye replacement handle for 13-16 oz. Claw hammers & Vaughan 16 oz. Scaling Hammer. Fits 99 & SC16. Eye 1 inch x 1/2 inch. Overall length 13 1/2 inches. One wood wedge, 2 steel wedges and instructions included. MADE IN USA.
Qty:
Part #:107512
- SUBMITTAL INFORMATION NO-LEAD:
- The weighted average of the wetted surface of this no-lead product contacted by consumable water contains less than one quarter ofone percent (0.25%) lead.
Qty:
Part #:704443
- SUBMITTAL INFORMATION - Sizes:
- 1/2”, 3/4”, 1”- Ambient working temp. = -40ºF to 125ºF- 400 WOG, 150 WSP- 1/4 turn operation- 2 piece forged brass body- Blow out proof stem- Conforms to MSS-SP-110- Thread comply to ANSI B1.20.1
Qty:
Part #:701354
- SUBMITTAL INFORMATION - 125 WOG- Sizes:
- 1/2”, 3/4”- 1/2” is MNPT or SWT Combination- Complies with NSF/ANSI 372-2010
Qty:
Part #:701123
- SUBMITTAL INFORMATION - Sizes:
- 1/2” - 3/4”- 125 WOG- Soft seat design- Non rising stem- Directional- Complies with NSF / ANSI 372-2010
Qty:
Part #:500054
- Polished faces with generous bevels. Rust resistant black paint on sides. Hickory handle. MADE IN USA.
Qty:
Part #:500310
- Polished faces with generous bevels. Rust resistant black paint on sides. Hickory handle. MADE IN USA.
Qty:
Displaying: 1 - 24 of 98 Matching Items