Pass & Seymour (Legrand)
Square D
View:
Active Filters :
- Brand: Square D Pass & Seymour (Legrand) Tingley Wheeler-Rex
- Electrical Boxes, Conduit, Strut, and Raceway: Electrical Fittings
Part #:301466
- 20A Non-NEMA Plug - Black Back, White Front Body
Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
Raised ribs provide non-slip gripping profile for turning to lock and unlock.
Double dovetail design provides superior protection against cord pull-out forces.
Impact- and corrosion-resistant durable nylon 6 shell material.
Rounded back contour reduces snags and hang-ups on the job site.
Scallop shell design provides non-slip gripping surface for insertion and withdrawal.
Visible stamped NEMA configuration and device rating.
New-design external cord grips provide visible assurance of safe and proper cord retention.
Integral flexible rubber cord grommet conforms to and seals around SO cord to provide protection from oils, water, or chips entering wiring chamber.
Qty:
Part #:301467
- Industrial Spec Grade Turnlok 20A Non-NEMA Connector, Black Back, White Front Body
Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
Raised ribs provide non-slip gripping profile for turning to lock and unlock.
Double dovetail design provides superior protection against cord pull-out forces.
Impact- and corrosion-resistant durable nylon 6 shell material.
Rounded back contour reduces snags and hang-ups on the job site.
Scallop shell design provides non-slip gripping surface for insertion and withdrawal.
Visible stamped NEMA configuration and device rating.
New-design external cord grips provide visible assurance of safe and proper cord retention.
Integral flexible rubber cord grommet conforms to and seals around SO cord to provide protection from oils, water, or chips entering wiring chamber.
Qty:
Part #:301076
- Strain Relief Deluxe Cord Grips, 3/4-in NPT, Straight Male
Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance.
They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain.
They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets.
Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2 Class II, Div. 1 & 2 and Class III, Div. 1 & 2.
CSA File Number 67507
Qty:
Part #:303616
- Strain Relief Deluxe Cord Grips, 3/4-in
Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance.
They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain.
They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets.
Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2 Class II, Div. 1 & 2 and Class III, Div. 1 & 2.
PT, Straight Male
CSA File Number 67507
Qty:
Part #:301060
- Strain Relief Deluxe Cord Grips, 1/2-in NPT, Straight Male
Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance.
They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain.
They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets.
Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2 Class II, Div. 1 & 2 and Class III, Div. 1 & 2.
CSA File Number 67507
Qty:
Part #:306027
- Non-NEMA 3 Wire Plug - Black Back
Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
Raised ribs provide non-slip gripping profile for turning to lock and unlock.
Double dovetail design provides superior protection against cord pull-out forces.
Impact- and corrosion-resistant durable nylon 6 shell material.
Rounded back contour reduces snags and hang-ups on the job site.
Scallop shell design provides non-slip gripping surface for insertion and withdrawal.
Visible stamped NEMA configuration and device rating.
New-design external cord grips provide visible assurance of safe and proper cord retention.
Integral flexible rubber cord grommet conforms to and seals around SO cord to provide protection from oils, water, or chips entering wiring chamber.
White Front Body
Qty:
Part #:303617
- Strain Relief Deluxe Cord Grips, 1-1/2-in NPT, Straight Male
Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance.
They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain.
They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets.
Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2 Class II, Div. 1 & 2 and Class III, Div. 1 & 2.
CSA File Number 67507
Qty:
Part #:301055
- Strain Relief Deluxe Cord Grips, 1/2-in NPT, Straight Male
Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance.
They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain.
They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets.
Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2 Class II, Div. 1 & 2 and Class III, Div. 1 & 2.
CSA File Number 67507
Qty:
Part #:301073
- Strain Relief Deluxe Cord Grips, 3/4" NPT, Straight Male
Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance.
They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain.
They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets.
Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2 Class II, Div. 1 & 2 and Class III, Div. 1 & 2.
CSA File Number 67507
Qty:
Part #:303623
- Strain Relief Deluxe Cord Grips, 3/4-in NPT, Straight Male
Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance.
They are offered in single/double weave construction to help absorb direct pull, to resist flexing and binding, and to eliminate strain.
They are recommended for indoor or outdoor use where subjected to moisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets.
Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2 Class II, Div. 1 & 2 and Class III, Div. 1 & 2.
CSA File Number 67507
Qty:
Part #:301365
- 15A, 250V Extra-Hard Use Spec-Grade Connector, Black and White
Unit arrives completely ready-to-wire, cuts installation time significantly.
Nylon housing provides impact and chemical resistance.
Rugged two-piece cord grip provides more uniform cord retention.
Internal dust shield keeps terminals free of contaminants.
Tri-drive assembly screws are standard on all Specification Grade plugs and connectors.
All 3-wire terminals located on the same plane, allows for quick wire termination from any angle.
Heavy-duty brass alloy blades and contacts, resist heat rise, provide excellent conductivity.
Cord-grip screws recessed to protect installer against screwdriver head slippage.
For covering patents, see www.legrand.us/patents.
Qty:
Part #:306026
- Industrial Spec Grade Turnlok 20A Non-NEMA 3-Wire Connector, Black Back, White Front Body
Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
Raised ribs provide non-slip gripping profile for turning to lock and unlock.
Double dovetail design provides superior protection against cord pull-out forces.
Impact- and corrosion-resistant durable nylon 6 shell material.
Rounded back contour reduces snags and hang-ups on the job site.
Scallop shell design provides non-slip gripping surface for insertion and withdrawal.
Visible stamped NEMA configuration and device rating.
New-design external cord grips provide visible assurance of safe and proper cord retention.
Integral flexible rubber cord grommet conforms to and seals around SO cord to provide protection from oils, water, or chips entering wiring chamber.
Qty:
closeout
Part #:307483
- CLOSEOUTS Only 2 Left!
- Flexcor® Wire Mesh Grips Strain Relief Deluxe Cord Grips
Deluxe cord grips are woven of stainless steel mesh with an aluminum body for corrosion resistance.They are offered in single/double weave construction to help absorb direct pull, to resist flexing andbinding, and to eliminate strain. They are recommended for indoor or outdoor use where subjected tomoisture in the wiring of pendant stations, processing equipment, hand tools, and extension cord sets.Deluxe grips are suitable for use in hazardous locations per Class I, Div. 2 Class II, Div. 1 & 2 andClass III, Div. 1 & 2. NOTE Stainless steel mesh is not suitable for marine use.
$
46.89
Qty:
closeout
Part #:303620
- CLOSEOUTS Only 8 Left!
$
50.76
Qty:
Displaying: 1 - 14 of 14 Matching Items