1-1/2in x 2-1/2in
Pipe, Fittings, and Flanges
View:
Active Filters :
- Main Category: Pipe, Fittings, and Flanges
- Size: 1-1/2in x 2-1/2in 2in x 3/4 x 1/2in 5/16in
$
1.79
FT
Qty:
Part #:334-RHA2515F
- Hydrant Adapter Rocker Lug Brass Attributes
Weight
0.94 lb
Material
Cast Brass
Male Thread
NST (NH)
Lug
Rocker Lug
Female Thread
NST (NH)
Male Thread Size
1-1/2"
Female Thread Size
2-1/2"
$
30.27
Qty:
Part #:702871
- Barbed Hose Mender Attributes
Weight
0.025 lb
Material
Brass
Length
2.06"
Hose ID
5/16"
$
1.82
Qty:
Qty:
Part #:201495
- Brass Female Swivel x Male Adapter - Pin Lug Attributes
Weight
2.43 lb
Material
Cast Brass
Male Thread
NPT
Swivel Thread
NST (NH)
Lug
Pin Lug
Swivel Thread Size
2-1/2"
Male Thread Size
1-1/2"
$
135.36
Qty:
Part #:334-FWV25F15F
- Forestry Grade Aluminum 1/4 Turn Ball Type Wye Valve Attributes
Maximum Operating Pressure
400 PSI (water/AFFF only) at 70°F (21°C)
Weight
4.07 lb
Material
Cast Aluminum
Inlet
2-1/2" female NST (NH)
Outlet
(2) 1-1/2" male NST (NH)
$
559.39
Qty:
Part #:334-1790505C
- Barbed Tee Splicer Attributes
Weight
0.064 lb
Material
Brass
Hose ID
5/16"
$
4.07
Qty:
Part #:201496
- Style N37, Hydrant Adapter Rocker Lug Attributes
Weight
0.58 lb
Material
Hardcoat Aluminum
Male Thread
NST (NH)
Lug
Rocker Lug
Female Thread
NST (NH)
Male Thread Size
1-1/2"
Female Thread Size
2-1/2"
$
50.39
Qty:
Part #:1267-20604-MFC
- Additional InformationBlow-out proof stem provides a secondary stem seal in the full open positionAll stem threads are rolled for strength and ease of operationOne-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threadsSlotted spring pin to prevent accidental looseningVinyl dust cap for bonnet and stem (non-packing)Additional OptionsStem TipsNon-rotating (316 stainless) (T1 )Ball (440C stainless) (T5)Ball (carbide) (T6)Ball (Monel) (T8)Non-rotating regulating (316 Stainless) (T9)O-RingsEPDM (EM1)FFKM (Perfluoroelastomer 3018 or equivalent) (KZ1)NBR (NB1)Panel MountingsPanel mount (1 nut) (PM1)Panel mount (2 nuts) (PM2)Handles1-13/16" Mini "T" (HL1)1-3/8" Phenolic (HL4)1-3/4" Phenolic (HL5 )NotePlugs and bleed plugs are available and can be ordered separately.Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 204-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requestsAll NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.Other o-ring materials available on request.
Qty:
Part #:1267-20604-MFS
- Additional InformationBlow-out proof stem provides a secondary stem seal in the full open positionAll stem threads are rolled for strength and ease of operationOne-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threadsSlotted spring pin to prevent accidental looseningVinyl dust cap for bonnet and stem (non-packing)Additional OptionsStem TipsNon-rotating (316 stainless) (T1 )Ball (440C stainless) (T5)Ball (carbide) (T6)Ball (Monel) (T8)Non-rotating regulating (316 Stainless) (T9)O-RingsEPDM (EM1)FFKM (Perfluoroelastomer 3018 or equivalent) (KZ1)NBR (NB1)Panel MountingsPanel mount (1 nut) (PM1)Panel mount (2 nuts) (PM2)Handles1-13/16" Mini "T" (HL1)1-3/8" Phenolic (HL4)1-3/4" Phenolic (HL5 )NotePlugs and bleed plugs are available and can be ordered separately.Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 204-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requestsAll NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.Other o-ring materials available on request.
Qty:
Part #:1267-20604-MFS-P1
- Additional InformationBlow-out proof stem provides a secondary stem seal in the full open positionAll stem threads are rolled for strength and ease of operationOne-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threadsSlotted spring pin to prevent accidental looseningVinyl dust cap for bonnet and stem (non-packing)Additional OptionsStem TipsNon-rotating (316 stainless) (T1 )Ball (440C stainless) (T5)Ball (carbide) (T6)Ball (Monel) (T8)Non-rotating regulating (316 Stainless) (T9)O-RingsEPDM (EM1)FFKM (Perfluoroelastomer 3018 or equivalent) (KZ1)NBR (NB1)Panel MountingsPanel mount (1 nut) (PM1)Panel mount (2 nuts) (PM2)Handles1-13/16" Mini "T" (HL1)1-3/8" Phenolic (HL4)1-3/4" Phenolic (HL5 )NotePlugs and bleed plugs are available and can be ordered separately.Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 204-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requestsAll NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.Other o-ring materials available on request.
Qty:
Part #:1267-20604-MFS-P2
- Additional InformationBlow-out proof stem provides a secondary stem seal in the full open positionAll stem threads are rolled for strength and ease of operationOne-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threadsSlotted spring pin to prevent accidental looseningVinyl dust cap for bonnet and stem (non-packing)Additional OptionsStem TipsNon-rotating (316 stainless) (T1 )Ball (440C stainless) (T5)Ball (carbide) (T6)Ball (Monel) (T8)Non-rotating regulating (316 Stainless) (T9)O-RingsEPDM (EM1)FFKM (Perfluoroelastomer 3018 or equivalent) (KZ1)NBR (NB1)Panel MountingsPanel mount (1 nut) (PM1)Panel mount (2 nuts) (PM2)Handles1-13/16" Mini "T" (HL1)1-3/8" Phenolic (HL4)1-3/4" Phenolic (HL5 )NotePlugs and bleed plugs are available and can be ordered separately.Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 204-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requestsAll NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.Other o-ring materials available on request.
Qty:
Part #:1267-30604-MFC
- Additional InformationFKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling PTFE packing optionalAll stem threads are rolled for strength and ease of operationOne-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threadsSlotted spring pin to prevent accidental looseningVinyl dust cap for bonnet and stem (non-packing)Additional OptionsSoft SeatsPEEK (PK1)PCTFE (KF1)Stem TipsNon-rotating (316 stainless) (T1 )O-RingsEPDM (EM1)FFKM (Perfluoroelastomer 3018 or equivalent) (KZ1)NBR (NB1)Panel MountingsPanel mount (1 nut) (PM1)Panel mount (2 nuts) (PM2)Handles1-3/8" Phenolic (HL4)1-3/4" Phenolic (HL5 )NotePlugs and bleed plugs are available and can be ordered separately.Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 204-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requestsAll NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.Other o-ring materials available on request.
Qty:
Part #:1267-30604-MFS
- Additional InformationFKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling PTFE packing optionalAll stem threads are rolled for strength and ease of operationOne-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threadsSlotted spring pin to prevent accidental looseningVinyl dust cap for bonnet and stem (non-packing)Additional OptionsSoft SeatsPEEK (PK1)PCTFE (KF1)Stem TipsNon-rotating (316 stainless) (T1 )O-RingsEPDM (EM1)FFKM (Perfluoroelastomer 3018 or equivalent) (KZ1)NBR (NB1)Panel MountingsPanel mount (1 nut) (PM1)Panel mount (2 nuts) (PM2)Handles1-3/8" Phenolic (HL4)1-3/4" Phenolic (HL5 )NotePlugs and bleed plugs are available and can be ordered separately.Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 204-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requestsAll NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.Other o-ring materials available on request.
Qty:
Part #:1267-30604-MFS-P1
- Additional InformationFKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling PTFE packing optionalAll stem threads are rolled for strength and ease of operationOne-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threadsSlotted spring pin to prevent accidental looseningVinyl dust cap for bonnet and stem (non-packing)Additional OptionsSoft SeatsPEEK (PK1)PCTFE (KF1)Stem TipsNon-rotating (316 stainless) (T1 )O-RingsEPDM (EM1)FFKM (Perfluoroelastomer 3018 or equivalent) (KZ1)NBR (NB1)Panel MountingsPanel mount (1 nut) (PM1)Panel mount (2 nuts) (PM2)Handles1-3/8" Phenolic (HL4)1-3/4" Phenolic (HL5 )NotePlugs and bleed plugs are available and can be ordered separately.Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 204-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requestsAll NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.Other o-ring materials available on request.
Qty:
Part #:334-DMH15F25F
- Double Male Hex Nipple Brass
Attributes
Weight
1.26 lb
Optional Package/Box Quantity
5
Material
Cast Brass
Male Thread
NST (NH)
NST (NH)
Male Thread Size
1-1/2"
2-1/2"
$
52.63
Qty:
Part #:334-HA2515F
- Hydrant Adapter Pin Lug Brass
Attributes
Weight
0.88 lb
Optional Package/Box Quantity
20
Material
Cast Brass
Male Thread
NST (NH)
Lug
Pin Lug
Female Thread
NST (NH)
Male Thread Size
1-1/2"
Female Thread Size
2-1/2"
$
25.34
Qty:
Displaying: 1 - 17 of 17 Matching Items