Cam and Groove Gaskets
Pipe, Fittings, and Flanges
View:
Active Filters :
- Main Category: Pipe, Fittings, and Flanges
- Pipe and Fittings: Cam and Groove Gaskets Cam and Groove Copper Tube and Fittings Transair Pipe and Fittings
$
1.27
FT
Qty:
$
1.79
FT
Qty:
$
1.75
FT
Qty:
Qty:
Qty:
Qty:
Part #:521321
- Technical Specifications
Pipe O.D. (inch) 1-1/2
Length (ft) 20
Color Blue
Length (m) 6
Pipe O.D. (mm) 40
Pipe Outside Diameter 1-1/2 inch, 40 mm
Length 20 ft, 6 m
Color Blue
Maximum Operating Pressure 232 psi, 15.9 bar
Minimum Operating Temperature -4 °F, -20 °C
Maximum Operating Temperature +115 °F, +46.1 °C
Weight 6.22 lb, 2.82 kg
Vacuum Pressure Rating 29.6 Inch-Hg
Materials of Construction Powder Coated Aluminum
Application Compressed Air, Vacuum, Industrial/Inert Gases
Specifications Met EN 755.2, EN 755.8, EN 573.3, ISO 9001, ASME B31.1 - 31.9, ISO 8573 (Air Quality), TUV Certification, CE Conformity, QUALICOAT
$
27.39
Qty:
Part #:521326
- To drill Transair pipe, use drilling tool 6698 02 01.:
$
148.13
Qty:
Part #:811312
-
Part Number
100GTFVI
Material
PTFE (TFE) with FKM-A Filler
Color
White / Black
Color Code
1 yellow stripe
Size
1" (25mm)
Weight Lb
0.0200
$
12.99
Qty:
Part #:801247
- Cam & Groove Gasket Attributes
Weight
0.035 lb
Size
2" (50 mm)
Material
FKM-A
Color Code
1 yellow stripe
Color
Green
$
11.25
Qty:
Part #:801317
- Cam & Groove Gasket Attributes
Weight
0.065 lb
Size
3" (75 mm)
Material
FKM-A
Color Code
1 yellow stripe
Color
Green
$
13.80
Qty:
Part #:510700
- Cam & Groove Encapsulated Gasket Attributes
Maximum Operating Pressure
125 PSI
Weight
0.01 lb
Size
1" (25 mm)
Material
PTFE (FEP) Encapsulated Silicone
Color
Translucent / Red
Maximum Temperature
225°F (107°C)
$
22.05
Qty:
Part #:101200
- asc-es.comSCI® Press - Copper FittingsApplications*Fluids containing hydrocarbon-based oils are not compatible with the EPDM seal.All copper tubing must comply with the ASTM B88 standard. Fittings are approved for installations above and below ground as permitted by local building codes.Copper Fitting Alloy C1220 has been evaluated by IAPMO R&T Lab to NSF/ANSI 61 for use in drinking water supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5may require corrosion control to limit leaching of copper into the drinking water.PS-10.22 page 2 PS-SUB-SCI Press-Cooper-v01 20221020SCI Press Copper Fittings are intended for use with ASTM B88 seamless copperwater tube (Types K, L, & M) in residential and commercial plumbing andmechanical systems. Common applications are listed below:
- Types of Service Pressure Temperature EPDM Compatibility*Liquids/Potable WaterWater Systems 300 psi (Test pressure of 600 psi) -20°F to 248° YSteam (Residential) 5 psi Max 227° YAcetone (Liquid) 70 psi -14° to 104°' YFuel, Oil, LubricantsEthanol (Pure grain alcohol) 200 psi Ambient, less than 250° YGasesCompressed Air(Oil concentration ≤25 mg/m3) 200 psi Max 140° YNitrogen 200 psi Max 140° YCarbon Dioxide 200 psi Max 140° YCarbon Monoxide 200 psi Max 140° YArgon 200 psi Max 140° YOxygen(Non-Medical, Keep free of oil and grease) 140 psi Max 140° YHydrogen 125 psi Max 140° YVacuum (Maximum absolute pressure) 750μm Hg Max 160° YVacuum (Maximum differential pressure) 29.2" Hg Max 160° Y
$
3.08
Qty:
Part #:101202
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
$
3.62
Qty:
Qty:
Qty:
Part #:811300
- Cam & Groove Envelope Gasket Attributes
Weight
0.016 lb
Size
1" (25 mm)
Material
PTFE (TFE) with Buna-N Filler
Color Code
1 blue stripe
Color
White / Black
$
6.12
Qty:
Part #:334-200GTFVI
- Cam & Groove Envelope Gasket Attributes
Weight
0.04 lb
Size
2" (50 mm)
Material
PTFE (TFE) with FKM-A Filler
Color Code
1 yellow stripe
Color
White / Black
$
19.26
Qty:
Displaying: 1 - 24 of 251 Matching Items