Asc Engineered Solutions
Pipe, Fittings, and Flanges
View:
Active Filters :
- Main Category: Pipe, Fittings, and Flanges
- Brand: Asc Engineered Solutions Dixon Valve & Coupling Company Llc
$
13.53
Qty:
Part #:101200
- asc-es.comSCI® Press - Copper FittingsApplications*Fluids containing hydrocarbon-based oils are not compatible with the EPDM seal.All copper tubing must comply with the ASTM B88 standard. Fittings are approved for installations above and below ground as permitted by local building codes.Copper Fitting Alloy C1220 has been evaluated by IAPMO R&T Lab to NSF/ANSI 61 for use in drinking water supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5may require corrosion control to limit leaching of copper into the drinking water.PS-10.22 page 2 PS-SUB-SCI Press-Cooper-v01 20221020SCI Press Copper Fittings are intended for use with ASTM B88 seamless copperwater tube (Types K, L, & M) in residential and commercial plumbing andmechanical systems. Common applications are listed below:
- Types of Service Pressure Temperature EPDM Compatibility*Liquids/Potable WaterWater Systems 300 psi (Test pressure of 600 psi) -20°F to 248° YSteam (Residential) 5 psi Max 227° YAcetone (Liquid) 70 psi -14° to 104°' YFuel, Oil, LubricantsEthanol (Pure grain alcohol) 200 psi Ambient, less than 250° YGasesCompressed Air(Oil concentration ≤25 mg/m3) 200 psi Max 140° YNitrogen 200 psi Max 140° YCarbon Dioxide 200 psi Max 140° YCarbon Monoxide 200 psi Max 140° YArgon 200 psi Max 140° YOxygen(Non-Medical, Keep free of oil and grease) 140 psi Max 140° YHydrogen 125 psi Max 140° YVacuum (Maximum absolute pressure) 750μm Hg Max 160° YVacuum (Maximum differential pressure) 29.2" Hg Max 160° Y
$
3.08
Qty:
Part #:101202
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
$
3.62
Qty:
Part #:101206
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
$
16.69
Qty:
$
10.69
Qty:
Part #:334-2721212C
- Male NPT x Push-on Hose Barb Attributes
Weight
0.194 lb
Material
Brass
Component Material
Yellow Plastic Cap
Male Thread
NPTF
Temperature Range
-40°F to 150°F
Length
2.55"
Hose ID
3/4"
Hex
1-1/16"
Male Thread Size
3/4"-14
Pressure Rating
350 PSI
$
6.38
Qty:
$
13.44
Qty:
Qty:
Qty:
Qty:
Part #:334-1231-06-10
- Male JIC x Male SAE O-ring Boss® Attributes
Weight
0.183 lb
Material
Zinc Plated Steel
Male Thread
JIC
SAE O-ring Boss
Working Pressure
3500 PSI
Male Thread Size
9/16"-18
7/8"-14
$
2.43
Qty:
Part #:334-2881217C
- Female 37° JIC Swivel x Push-on Hose Barb:
$
9.53
Qty:
Part #:334-31266000
- Legris Push-In Plug Attributes
Tube OD
3/8"
Weight
0.01 lb
Material
Plastic
Temperature Range
-4°F to 175°F (-20°C to 79°C)
$
2.37
Qty:
Part #:334-3CMB4-B-E
- DQC CM-Series Industrial Mold Interchange Unvalved Coupler Push-Loc Barb:
$
14.19
Qty:
Part #:334-6401-6-8
- Male O-ring Boss® x Male NPTF Attributes
Weight
0.12 lb
Material
Zinc Plated Steel
Male Thread
SAE O-ring boss
NPTF
Working Pressure
3000 PSI
Male Thread Size
9/16"-18
1/2"-14
$
2.03
Qty:
Part #:334-6500-6-4
- 37° JIC:
$
4.15
Qty:
Part #:334-69S12X12
- Push-In Male Swivel Elbow Attributes
Tube OD
3/8"
Weight
0.1065 lb
Material
Forged Brass
Male Thread
NPTF
Temperature Range
-10°F to 200°F (-23°C to 93°C)
$
7.88
Qty:
Part #:334-69S8X4
- Push-In Male Swivel Elbow Attributes
Tube OD
1/4"
Weight
0.05 lb
Material
Forged Brass
Male Thread
NPTF
Temperature Range
-10°F to 200°F (-23°C to 93°C)
Male Thread Size
1/8"
$
5.19
Qty:
Part #:334-B17SC
- Boss® Wing Nut Cap Attributes
Weight
1.86 lb
Size
1-1/4" and 1-1/2" (32mm and 40mm)
Material
Plated Iron
$
43.61
Qty:
Part #:334-C6259K3232PSW
- Hydraulic 4-Bolt Flange Pipe Socket Weld Attributes
Maximum Operating Pressure Metric
40 MPa
Maximum Operating Pressure
6000 PSI
Weight
9.4 lb
Material
Carbon Steel
Style
Code 62
Fitting Type
O-ring
Torque
Grade 8 UNC 332 lb-ft
Port
2"
$
147.49
Qty:
Part #:334-C62603232PSW
- Hydraulic 4-Bolt Flange Pipe Socket Weld Attributes
Maximum Operating Pressure Metric
40 MPa
Maximum Operating Pressure
6000 PSI
Weight
6.9 lb
Material
Carbon Steel
Style
Code 62
Fitting Type
Flat Face
Torque
Grade 8 UNC 332 lb-ft
Port
2"
$
143.97
Qty:
Part #:334-CM3F3-B
- DQC CM-Series Industrial Mold Interchange Plug Female NPTF Attributes
Weight
0.07 lb
Material
Brass
Maximum OD
0.87"
Thread
Female NPTF
Body Size
3/8"
Temperature Range
-90°F to +400°F (-68°C to +205°C)
Thread Size
3/8"-18
Length
1.34"
Hex
3/4"
$
4.88
Qty:
Part #:334-CM3M3-B
- DQC CM-Series Industrial Mold Interchange Plug Male NPTF Attributes
Weight
0.087 lb
Material
Brass
Maximum OD
0.79"
Thread
Male NPTF
Body Size
3/8"
Temperature Range
-90°F to +400°F (-68°C to +205°C)
Thread Size
3/8"-18
Length
1.43"
Hex
11/16"
$
2.07
Qty:
Displaying: 1 - 24 of 165 Matching Items