Asc Engineered Solutions
Pipe, Fittings, and Flanges
View:
Active Filters :
- Main Category: Pipe, Fittings, and Flanges
- Brand: Asc Engineered Solutions General Flange Modern Pipe Supports Sharkbite
$
2.20
Qty:
$
3.20
Qty:
$
3.50
Qty:
$
13.53
Qty:
Part #:101200
- asc-es.comSCI® Press - Copper FittingsApplications*Fluids containing hydrocarbon-based oils are not compatible with the EPDM seal.All copper tubing must comply with the ASTM B88 standard. Fittings are approved for installations above and below ground as permitted by local building codes.Copper Fitting Alloy C1220 has been evaluated by IAPMO R&T Lab to NSF/ANSI 61 for use in drinking water supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5may require corrosion control to limit leaching of copper into the drinking water.PS-10.22 page 2 PS-SUB-SCI Press-Cooper-v01 20221020SCI Press Copper Fittings are intended for use with ASTM B88 seamless copperwater tube (Types K, L, & M) in residential and commercial plumbing andmechanical systems. Common applications are listed below:
- Types of Service Pressure Temperature EPDM Compatibility*Liquids/Potable WaterWater Systems 300 psi (Test pressure of 600 psi) -20°F to 248° YSteam (Residential) 5 psi Max 227° YAcetone (Liquid) 70 psi -14° to 104°' YFuel, Oil, LubricantsEthanol (Pure grain alcohol) 200 psi Ambient, less than 250° YGasesCompressed Air(Oil concentration ≤25 mg/m3) 200 psi Max 140° YNitrogen 200 psi Max 140° YCarbon Dioxide 200 psi Max 140° YCarbon Monoxide 200 psi Max 140° YArgon 200 psi Max 140° YOxygen(Non-Medical, Keep free of oil and grease) 140 psi Max 140° YHydrogen 125 psi Max 140° YVacuum (Maximum absolute pressure) 750μm Hg Max 160° YVacuum (Maximum differential pressure) 29.2" Hg Max 160° Y
$
3.08
Qty:
Part #:101202
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
$
3.62
Qty:
Part #:101206
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
$
16.69
Qty:
Qty:
Qty:
Qty:
$
10.69
Qty:
$
0.88
Qty:
Part #:100597
-
3/4 in. x 3/4 in.
Innovative SharkBite push-to-connect pipe repair couplings make for quick and easy installations. Connect two pieces of PEX, copper, CPVC, PE-RT and / orSDR-9 HDPE pipe in any combination. Approved for underground and behind-the-wall applications, brass couplings with push-to-connect design can be installed permanently or provide a temporary fix while you work. Choose the right model for your pipe type, measure and mark the correct insertion depth and push to connect.
Push-to-connect brass pipe connectors are ideal for working in tight spaces but can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day. Plus, SharkBite brass pipe couplings
Are compatible with PEX, copper, CPVC, PE-RT andSDR-9 HDPE pipe in any combination.
Don't require special tools, crimping, glue or soldering.
Can be installed in wet lines.
Are approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
Can be easily removed using a Disconnect Clip or Disconnect Tongs (both sold separately).
Large diameter fittings (1-1/4 in. - 2 in.) require a Stiffener (sold separately) when connecting to PEX pipe.
Are rated for 200 psi and 200°F (93°C).
25-year warranty.
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Displaying: 1 - 24 of 33 Matching Items