Black painted steel with chrome triangular bezel and U-clamp
Pipe, Fittings, and Flanges
View:
Active Filters :
Part #:800026
- Dixon Cam & Groove Type F Adapter x Male NPT Attributes
Maximum Operating Pressure
250 PSI
Weight
1.7 lb
Size
2"
Material
Unplated Malleable Iron
$
40.72
Qty:
Part #:811050
- Dixon Cam & Groove Type DC Dust Cap Attributes
Weight
1.76 lb
Size
2"
Material
Unplated Malleable Iron
Seal
Buna-N
$
63.61
Qty:
Part #:334-FNG150S
- Gasket for Fog Nozzle Attributes
Weight
0.005 lb
Size
1-1/2"
Material
Buna-N
Thread
NPSH
Thickness
0.125"
OD
1.827"
ID
1.500"
$
2.51
Qty:
Part #:510172
- Cam & Groove Gasket Attributes
Weight
0.025 lb
Size
2" (50 mm)
Material
Buna-N
Color Code
1 blue stripe
Color
Black
$
0.96
Qty:
Part #:510407
- Dixon Cam & Groove Type A Adapter x Female NPT Attributes
Maximum Operating Pressure
250 PSI
Weight
1.15 lb
Size
2"
Material
Unplated Malleable Iron
$
33.06
Qty:
Part #:334-250-G-BU
- Cam & Groove Gasket Attributes
Weight
0.04 lb
Size
2-1/2" (65 mm)
Material
Buna-N
Color Code
1 blue stripe
Color
Black
$
1.04
Qty:
Part #:1267-15-120-100-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-120-15-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-120-15-PSI/KPA-10-32
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-120-15-PSI/KPA-BP3
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-120-160-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-120-160-PSI/KPA-GL
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.NoteA steel, stainless or chrome case & cover ring must be additionally ordered when lenses other than acrylic are utilized on all 100 Series models.
Qty:
Part #:1267-15-120-30-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-120-30-PSI/KPA-GL
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.NoteA steel, stainless or chrome case & cover ring must be additionally ordered when lenses other than acrylic are utilized on all 100 Series models.
Qty:
Part #:1267-15-120-30-VAC/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-120-30-VAC/KPA-GL
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.NoteA steel, stainless or chrome case & cover ring must be additionally ordered when lenses other than acrylic are utilized on all 100 Series models.
Qty:
Part #:1267-15-120-60-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-120-60-PSI/KPA-GL
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.NoteA steel, stainless or chrome case & cover ring must be additionally ordered when lenses other than acrylic are utilized on all 100 Series models.
Qty:
Part #:1267-20-120-100-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-100-PSI/KPA-GL
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.NoteA steel, stainless or chrome case & cover ring must be additionally ordered when lenses other than acrylic are utilized on all 100 Series models.
Qty:
Part #:1267-20-120-1000-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-15-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-160-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Displaying: 1 - 24 of 53 Matching Items