1/4"
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Alt. Size: 1/4" 3/4" Double Extra Large Extra Large
Part #:200045
- Description
Class 2
2&rdquo Silver reflective tape
100% ANSI Polyester Mesh
Dual sized
Pockets 1 inside left chest w/ hook & loop closure
Hook & Loop closure
$
7.50
Qty:
Part #:205225
- Description
Class 2
2&rdquo 3M&trade Scotchlite&trade Reflective Material
100% ANSI Polyester Tricot
Zipper closure
$
24.83
Qty:
$
30.87
Qty:
$
30.87
Qty:
$
30.65
Qty:
$
33.90
Qty:
Qty:
Part #:517553
- Features
3/4 Dip, Impermeable Nitrile Base Coating
Sandy Nitrile Command&trade Touchscreen Coated Palm
Insulated 13 Gauge HPPE/Steel Blended Knit
Color Coded Thumb Saddle Reinforcement
Applications Cold Storage, Manufacturing, Frozen Food Processing, General Outdoor Activities
Part #:521705
- The Ultimate General Purpose Rain Jacket
Highly visible, flame resistant, and loaded with special features, the Comfort-Brite is lightweight, durable, and affordable.Ideal Applications Utilities, Telecommunications, Construction, Transportation, DOT&rsquos, Municipalities, Waste Management and General Industry. Chemical Resistance Many acids, oils, alcohols, salts, and alkalies. ANSI/ISEA 107 Type R Class 3 compliant jacket for high visibility. Loaded with special features for multipurpose applications. Fluorescent background material for excellent daytime visibility. 2 inch silver reflective tape reflects light for 360° nighttime conspicuity. Full cut shoulder with 90° sleeve to body angle for maximum freedom of movement. Therm-O-Rad sealed seams for 100% waterproof protection. Zipper/storm fly front seals out wind, rain, and contaminants. Non-conductive hardware. Roll-a-way hood in collar design for added convenience. Full-vented cape back for improved air circulation. D-ring access for fall protection harness. Easy access cargo pockets with closure. Hook & loop take-up straps on sleeve cuffs for adjustable fit. Mildew resistant. Flame resistant tested. Self extinguishing with flameout and afterglow less than or equal to 2 seconds after removal of ignition source and char length less than 6 inches. (Test method ASTM D6413.)
Qty:
Part #:800087
- With its reinforced heel and toe, these work overshoes are designed to stand up to tough daily wear. That's why they are considered the industry standard..Ideal Applications Food Processing, Transportation, Utilities, Construction, General Industry, Municipalities, and Agriculture. Chemical Resistance Acids, alcohols, bases and diluted water solutions of most chemicals that are water soluble. Not recommended for constant contact with petroleum and oil based products. 10 inch height. Injection molded, seamless construction for 100% waterproof protection. Excellent tensile strength, ease of stretch and tear resistance for more durability, better comfort and easier on and off. Will not crack or stiffen in the coldest of weather. Deep cleated outsole spits out debris for good slip resistance and longer wear. Heavy duty heel kick off cleat for easy no hands removal. Sturdy molded in rubber button for secure closure. No hardware to conduct, tear, snag, or corrode. No lining for easy cleaning and decontamination. More material in heel, toe, and sole for longer wear. Less material in the upper results in lighter weight and reduced leg fatigue.
Part #:800090
- With its reinforced heel and toe, these work overshoes are designed to stand up to tough daily wear. That's why they are considered the industry standard..Ideal Applications Food Processing, Transportation, Utilities, Construction, General Industry, Municipalities, and Agriculture. Chemical Resistance Acids, alcohols, bases and diluted water solutions of most chemicals that are water soluble. Not recommended for constant contact with petroleum and oil based products. 10 inch height. Injection molded, seamless construction for 100% waterproof protection. Excellent tensile strength, ease of stretch and tear resistance for more durability, better comfort and easier on and off. Will not crack or stiffen in the coldest of weather. Deep cleated outsole spits out debris for good slip resistance and longer wear. Heavy duty heel kick off cleat for easy no hands removal. Sturdy molded in rubber button for secure closure. No hardware to conduct, tear, snag, or corrode. No lining for easy cleaning and decontamination. More material in heel, toe, and sole for longer wear. Less material in the upper results in lighter weight and reduced leg fatigue.
Part #:800114
- The original Webdri® PVC on polyester overalls are designed for comfort and toughness. Webdri are truly comfortable, high performance overalls. Made with a heavy coating and a high loft lining, it can withstand extensive laundering and duty. That is why it is one of our most popular overalls.
Ideal Applications Food Processing, Agriculture, Construction, Manufacturing, and Forestry.
Chemical Resistance Many acids, oils, alcohols, salts and alkalies. Therm-O-Rad sealed seams for 100% waterproof protection. Plain front. Premium snap lock suspender buckles. Heavy duty snaps guaranteed not to fail. Suspender crossover. Mildew resistant. Stitch bonded non-woven lining defies punctures and tears as well as dissipates moisture. Specialty PVC coating resists fats and oils.
Qty:
$
36.15
Qty:
Part #:801222
- Lightweight and affordable
Designed for 100% waterproof protection, our economy line of rainsuits is generously cut for ease of movement and comfort. With features such as electronically welded seams, easy access cargo pockets, vented cape back, snaps for adjustable fit, and heavy duty zipper, they are great for work or play. These imported suits are made to meet Tingley's high standard for quality. Ideal Applications General purpose, light duty. 2-piece suit includes hooded jacket and pants. .25mm double ply PVC. Lightweight and affordable. Zipper front jacket closure with outside storm flap to seal out wind and rain. Attached hood with drawcord. Snap fly front pants. All seams are electronically welded for 100% waterproof protection. Jacket has two easy access cargo pockets with flaps. Vented cape back and underarm vents circulate air for added comfort. Elastic waist pants with snap fly front. Take up snaps on sleeve and leg cuffs for adjustable fit.
Qty:
Part #:807290
- Overview
Designed for rigorous wire marking applications, PermaSleeve® PS Heat Shrink Polyolefin (B-342) sleeves combine speed, ease of use, and permanence to create high quality labeling.
Industrial Grade &ndash Extreme temperature resistance, UV resistant, Chemical resistant, Fuel and Oil resistant, Self-extinguishing
Superior Aesthetics &ndash Crisp, clear identification resistant to abrasions and fading
Certifications &ndash UL Recognized to UL 224, RoHS Compliant to 2011/65/EU (Pass 2015/863), SAE AS23053/5 (Class 1), SAE AS-81531, MIL-STD-202
31 heat shrinking sleeve designed for 20 - 10 gauge (diameter 0.062 - 0.15 inches, 1.6 - 3.8 mm)
For material specific performance and properties, please refer to the Technical Data Sheet (TDS
Product Highlights
Material Number
B-342 (View Technical Data Sheet)
For Use with Printer
BMP®21 Label Printer, BMP®21-PLUS Label Printer, IDPAL Handheld Labeler
Sleeve Size
0.187 in Dia x 7 ft L
Label Properties
Heat Shrink
$
99.73
Qty:
closeout
Part #:511960
- CLOSEOUTS Only 1 Left!
-
3/4" x 6" Jaw & Jaw Turnbuckle, Forged Carbon Steel, Galvanized(Discontinued being replaced by TB108-J-J-HDG)
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class G
Jaws on Sizes 1/4&rdquo Through 5/8&rdquo Have Hex Head Bolt and Nut
Jaws on Sizes 3/4&rdquo Through 1-1/2&rdquo Have Cotter Key and Bolt
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
$
110.24
Qty:
closeout
Part #:511961
- CLOSEOUTS Only 5 Left!
-
3/4" x 9" Jaw & Jaw Turnbuckle, Forged Carbon Steel, Galvanized(Discontinued being replaced by TB108-9-J-J)
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class G
Jaws on Sizes 1/4&rdquo Through 5/8&rdquo Have Hex Head Bolt and Nut
Jaws on Sizes 3/4&rdquo Through 1-1/2&rdquo Have Cotter Key and Bolt
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
$
96.04
Qty:
closeout
$43.28 MSRP
$
24.70
Part #:511954
- CLOSEOUTS Only 4 Left!
-
1/4&rdquo x 4&rdquo Hook & Eye Turnbuckle, Forged Carbon Steel, Galvanized
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class F
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:512360
- The Radians RWG22 Hi-Viz work glove provides excellent protection from abrasion. The seamless design of the 13 gauge, polyester shell with the polyurethane dipped palm provides protection in wet or dry conditions and a comfortable fit in hazardous applications.
Applications Construction, Assembly, Automotive, General Purpose, Manufacturing, Shipping, Warehousing
Qty:
closeout
$31.18 MSRP
$
20.89
Qty:
Qty:
Part #:333-RWGD101XL
- Radians RWGD101 AXIS D2&trade Dyneema® Cut Protection Level A3 Glove
Dyneema® Diamond Technology offers maximum protection over traditional materials like aramid, leather, nylon and polyethylene with glass fiber. Dyneema® Diamond Technology fibers are thinner than generic HMPE fibers and less dense than aramid fibers, making them more comfortable, thinner and cooler to the touch, while still providing advanced cut protection. The RWGD101, an Axis D2&trade Series glove with Dyneema® Diamond Technology, has an ANSI Cut rating of A3 and an EN388 cut rating of 5. The RWGD101 glove features a 13 gauge white polyester shell with Dyneema® Diamond Technology and a gray PU palm coating to provide significant protection against abrasion and cuts.
Qty:
Displaying: 25 - 48 of 52 Matching Items