1/4in
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Size: 1/4in 3in 20ft x 30ft L
Part #:502360
- All-Purpose Blue Poly Tarp
Tear and UV resistant mold and mildew resistant will not rot nor shrink.
Ideal for camping, hunting, tent fly, storage cover, canopy, boat cover, woodpile cover.
CORNERS AND GROMMETS
Rust-Proof Aluminum Grommetsevery 3 ft and on each corner.
OUTER EDGE All edges heat-sealed and reinforcedwith polyethylene rope.
CROSS WEAVE Polyethylene yarn woven for durability.
RAIN AND UV PROTECTION Water proof and UV resistant.
COLOR BLUE
$
43.55
Qty:
Part #:503802
-
PIP® Superior Grade Split Cowhide Leather Welder's Glove with Cotton/Foam Lining and DuPont&trade Kevlar® Stitching
Side Split Cowhide leather construction provides comfort, durability, excellent abrasion resistance, and breathability
Side Split leather is durable and provides excellent protection due to its dense fibers
Fully welted to protect seams from abrasions
Stitched with Kevlar® adding strength and burn resistance
Cotton/foam lining gives welders additional heat protection but still absorbs moisture
One-piece back for extended glove life
Wing thumb increases comfort in open-handed work
Double reinforced palm and thumb strap increases durability and provides added protection at common wear points
Part #:504775
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:512251
-
Radians SJ11QB Class 3 weather proof Bomber Jacket with a quilted liner makes it very easy to slip on and off over other fleece or other warm outwear.
Quilted Liner 160g/m2
Color blocked bottom
2" silver reflective tape
PU coated weather proof 300D oxford polyester shell
Concealed attached hood
Elastic waistband and cuffs
Zippered, lined slash pockets
3D flap covered cell phone / radio chest pocket
Two lower zipper closure lined pockets
One inside open chest pocket
Mic tabs on both shoulders.
Qty:
Part #:512262
Qty:
Part #:512740
- Powder-Free Latex Gloves, Large, Natural, 4 4/5 mil, 1000/Carton
Eliminates potential aerosolization of glove powder and powder associated transfer of chemical allergens
Perfect combination of protection and sensitivity.
Enhanced strength and durability.
Quick and easy to don.
Improved tactile sensitivity with increased gripping characteristics
Part #:806806
-
1/4" Quick Link, Steel, Zinc Plated, #7350
For Fast and Easy Connections Between Two Lengths of Chain
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Do Not Use to Support Human Weight, for Playground or Athletic Equipment, or as a Safety Device
Qty:
Part #:508013
-
1/4" Grade 30 Proof Coil Chain, Zinc Plated, 141' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:201554
- Barricade Safety Tapes 2 Mil Caution Tape 3" Wide x 1,000ft
&bull Rolls are individually labeled with UPC code&bull 2" Black characters on 3" wide yellow tape unless indicated.&bull Ask us about other legends and sizes available&bull Boxed packaging
Qty:
Part #:516622
- North Polar Insulated Leather Palm - 70/6465NK
High performance protection in cold weather. Thinsulate® liner provides excellent thermal protection, from temperatures down to -36° F (-38° C). Waterproof vinyl liner helps to prevent hands from getting wet. Gunn cut and wing thumb construction for wearer comfort.
Specifications
Construction
Gunn cut, wing thumb
Gauge / mil
NA
Glove Type
Thermal glove
Material
Split leather and cotton canvas
Material Color
Blue and yellow
Recommended for temperatures down to -36°F (-38°C)
Part #:200443
- Empire® Level Safety Barricade TapesProduct DetailsSafety tapes indicating warning or danger areasLarge bold lettering is easy to read at a distanceDurable plastic material remains pliant in cold weather
Qty:
Part #:506505
- Floor Stripe&trade High Performance Message Marking Tapes Identify and call attention to hazards throughout your facility. Printed 1-mil polyester tapes have 1-mil gloss over-laminate. Acrylic adhesive backing provides high tack and bond to a variety of smooth and rough surfaces. Available 3" wide x 50-ft. roll. Tapes can be custom printed with your message, graphic, or logo. Contact us with part number PTP155.
Part #:506851
-
Cool, comfortable, and washable. Offers protection for light welding and from light sparks.
9 oz flame retardant 100% cotton Weldlite&trade fabric meets ASTM D6413-10
30" length
Relaxed fit design offers comfort for all-day wearability
Adjustable snap wrist, and large inside pocket
Leather reinforced, black anodized non-reflective snaps
Weldlite&trade high quality fabric is anti-static, rot and mildew resistant
Maintains its flame resistance for up to 50 home or 25 commercial washings
Sizes XS-6XL
Qty:
Part #:511891
-
1/4" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
Qty:
Part #:511940
-
1/4" Heavy Wire Rope Thimble, Galvanized
Standard Material Hot Rolled, Mild Steel
Galvanized
Imported
A Thimble is a Wear Pad That Protects the Rope From Cuts, Kinking and Abrasions. Always Use An Appropriate Thimble When Making An Eye in a Rope.
When it is Necessary to Open a Thimble to Insert a Fitting, Make Sure the Points are Properly Aligned When the Thimble is Closed. Inspect Carefully for Cracks.
Thimbles ARE NOT Designed for Load Carrying Purposes Therefore Working Load Limits Have Not Been Established.
Qty:
Part #:512240
-
Radians SJ01B-3 Type R, Class 3, Long Sleeve Hooded Sweatshirt with zipper closure offers superior warmth while keeping you visible. Color blocking at the bottom conceals dirt.
Black elastic knit waistband and cuffs.
Low Piling Polyester fleece material.
Color blocking at the bottom.
2&rdquo silver reflective tape.
Full front zipper closure.
Two lower pouch pockets.
Hood with adjustable pull cords.
Custom imprinting available on left chest and back center.
25 Wash Max.
Meets ANSI/ISEA 107-2015 Standards.
Qty:
Part #:512473
-
The Radians RWG22 Hi-Viz work glove provides excellent protection from abrasion. The seamless design of the 13 gauge, polyester shell with the polyurethane dipped palm provides protection in wet or dry conditions and a comfortable fit in hazardous applications.
Applications Construction, Assembly, Automotive, General Purpose, Manufacturing, Shipping, Warehousing
Qty:
closeout
$17.67 MSRP
$
11.88
Part #:512500
- CLOSEOUTS Only 1 Left!
- The RWG603 Cut Protection Sandy Foam Nitrile Coated Glove by Radians has an ANSI Cut rating of A5 and an EN388 cut rating of 5. The high visibility red sandy foam nitrile palm coating provides a strong grip in both wet and dry applications. The dense TPR overlays on the back of the hand provide added impact protection. This 13 gauge high performance glove is ideal for applications that need both cut and abrasion resistance along with the ability to grip objects.
Applications Petrochem Industry, Automotive, Construction, Manufacturing, Material Handling
Qty:
Part #:517554
- The Radians RWG605 cold weather glove provides EN388 level 5 protection and ANSI level 4 protection against cuts. The RWG605 features a 13 gauge knitted HPPE outer shell with a smooth blue latex coating and a 7 gauge Acrylic inner shell to provide extra protection and comfort. The palm has a black foam latex coating that provides excellent protection from abrasion in wet or dry, cold weather conditions.
Applications Cold Storage, Manufacturing, Frozen Food Processing, General Outdoor Activities
Part #:690-0181413
-
1/4" Grade 43 High Test Chain, Bright, 150' per Round Pail
Designed for Use in Load Binding, Towing, Logging and Other Applications Requiring High Strength
Standard Material Carbon Steel
Standard Finish Bright and Zinc Plated
Hallmarking "C4" All Sizes and "USA" on 1/4" and 5/16"
Proof Tested
Design Factor 3 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:502806
-
1/4" Grade 30 Proof Coil Chain, Zinc Plated, 800' per Round Drum
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:511842
-
Benefits and Features
Meets the dimensional and finish requirements of FF-C-450
Drop forged saddle
Forged saddles include size, USA and CM logo
Drop-forged base for superior function and toughness
Specifiations
Bolt 5/16in-18
Torque 15ft-lbs
Qty:
$
4.75
Qty:
Displaying: 1 - 24 of 60 Matching Items