#1
Safety and Welding Products


Displaying: 25 - 46 of 46 Matching Items
46 Items
View:
Active Filters :
Part #:800047
The Ultimate General Purpose Rain Jacket Highly visible, flame resistant, and loaded with special features, the Comfort-Brite is lightweight, durable, and affordable. Ideal Applications Utilities, Telecommunications, Construction, Transportation, DOT&rsquos, Municipalities, Waste Management and General Industry. Chemical Resistance Many acids, oils, alcohols, salts, and alkalies. ANSI/ISEA 107 Type R Class 3 compliant jacket for high visibility. Loaded with special features for multipurpose applications. Fluorescent background material for excellent daytime visibility. 2 inch silver reflective tape reflects light for 360&deg nighttime conspicuity. Full cut shoulder with 90&deg sleeve to body angle for maximum freedom of movement. Therm-O-Rad sealed seams for 100% waterproof protection. Zipper/storm fly front seals out wind, rain, and contaminants. Non-conductive hardware. Roll-a-way hood in collar design for added convenience. Full-vented cape back for improved air circulation. D-ring access for fall protection harness. Easy access cargo pockets with closure. Hook &amp loop take-up straps on sleeve cuffs for adjustable fit. Mildew resistant. Flame resistant tested. Self extinguishing with flameout and afterglow less than or equal to 2 seconds after removal of ignition source and char length less than 6 inches. (Test method ASTM D6413.)
$82.18 MSRP $ 61.96
Qty:
add to cart
Part #:800085
With its reinforced heel and toe, these work overshoes are designed to stand up to tough daily wear. That's why they are considered the industry standard..Ideal Applications Food Processing, Transportation, Utilities, Construction, General Industry, Municipalities, and Agriculture. Chemical Resistance Acids, alcohols, bases and diluted water solutions of most chemicals that are water soluble. Not recommended for constant contact with petroleum and oil based products. 10 inch height. Injection molded, seamless construction for 100% waterproof protection. Excellent tensile strength, ease of stretch and tear resistance for more durability, better comfort and easier on and off. Will not crack or stiffen in the coldest of weather. Deep cleated outsole spits out debris for good slip resistance and longer wear. Heavy duty heel kick off cleat for easy no hands removal. Sturdy molded in rubber button for secure closure. No hardware to conduct, tear, snag, or corrode. No lining for easy cleaning and decontamination. More material in heel, toe, and sole for longer wear. Less material in the upper results in lighter weight and reduced leg fatigue.
$37.57 MSRP $ 27.95 PR
Qty:
add to cart
PR
$55.99 MSRP $ 39.98
Qty:
add to cart
$ 19.66
Qty:
add to cart
Part #:800803
Lightweight and affordable Designed for 100% waterproof protection, our economy line of rainsuits is generously cut for ease of movement and comfort. With features such as electronically welded seams, easy access cargo pockets, vented cape back, snaps for adjustable fit, and heavy duty zipper, they are great for work or play. These imported suits are made to meet Tingley's high standard for quality. Ideal Applications General purpose, light duty. 2-piece suit includes hooded jacket and pants. .25mm double ply PVC. Lightweight and affordable. Zipper front jacket closure with outside storm flap to seal out wind and rain. Attached hood with drawcord. Snap fly front pants. All seams are electronically welded for 100% waterproof protection. Jacket has two easy access cargo pockets with flaps. Vented cape back and underarm vents circulate air for added comfort. Elastic waist pants with snap fly front. Take up snaps on sleeve and leg cuffs for adjustable fit.
$25.00 MSRP $ 20.92
Qty:
add to cart
$47.79 MSRP $ 36.02
Qty:
add to cart
$ 36.15
Qty:
add to cart
Part #:554937
MCR Safety Mustang Leather Welding Work Gloves Premium Top Grain Cowskin Leather 4.5 Inch Split Leather Gauntlet Cuff Only the finest top grain leather go into our MIG/TIG welding options. Sewn with DuPont&trade Kevlar&reg thread to resist sparks and sharp metals which can unravel most gloves, you will find these gloves a great long-term value. Low heat welding often requires optimal dexterity which affords great attention to detail. You'll find features on the 4950 include Premium grade cream grain cow leather, 4.5 Inch russet split gauntlet cuff and wing thumb. If you are looking for the best leather welding gloves, look no further than MCR Safety!
$ 18.29
Qty:
add to cart
PR
Part #:507504
5/16" Alloy Clevis Grab Hook, Forged Alloy, Painted Orange Material is Drop-Forged Carbon Steel (Grade 30 &amp 43) or Heat-Treated Alloy Steel Grade 30 &amp 43 Hooks Available Self-Colored or Zinc-Plated Alloy Hooks Are Painted Orange and Stamped &rdquoAlloy&rdquo 3.5 to 1 Design Factor Alloy Hook Sizes 1/4" to 3/8" are Supplied Individually Bagged and Unassembled Self-Colored Finish Hooks Are Bulk Packed, Zinc Plated Hooks Are Packed 10 Per Box Grab Hooks Are Designed to Grab a Chain Link and Hold it in Place Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load DO NOT EXCEED THE WORKING LOAD LIMIT
$21.54 MSRP $ 12.64
Qty:
add to cart
closeout
Part #:511863
CLOSEOUTS Only 10 Left!
5/16" Clevis Grab Hook, Forged Steel, Self Colored(Discontinued being replaced with T9501524) Material is Drop-Forged Carbon Steel (Grade 30 &amp 43) or Heat-Treated Alloy Steel Grade 30 &amp 43 Hooks Available Self-Colored or Zinc-Plated Alloy Hooks Are Painted Orange and Stamped &rdquoAlloy&rdquo 3.5 to 1 Design Factor Alloy Hook Sizes 1/4" to 3/8" are Supplied Individually Bagged and Unassembled Self-Colored Finish Hooks Are Bulk Packed, Zinc Plated Hooks Are Packed 10 Per Box Grab Hooks Are Designed to Grab a Chain Link and Hold it in Place Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load DO NOT EXCEED THE WORKING LOAD LIMIT
$11.53 MSRP $ 6.75
Qty:
add to cart
closeout
Part #:511871
CLOSEOUTS Only 7 Left!
5/16" Connecting Link, Forged Carbon Steel, Self Colored, 10 Pcs per Box Drop-Forged Heat-Treated Carbon or Alloy Steel Standard Finish is Self-Colored or Galvanized to Meet ASTM A-153 Specifications 4 to 1 Design Factor For Proper Closure, Peen the Prongs to Fill the Hole of the Mating Half as Much as Possible Meets Design Requirements of Federal Specification RR-C-271D, Type II Make Sure the Connecting Link Used is the Same Size as the Components Being Joined. e.g., a 3/8 in. Connecting Link is Used with 3/8 in. Chain Any Assembly Made Using Connecting Links Should be Rated at the Working Load Limit of the Weakest Component. The Working Load Limit of Connecting Links is Based on a Straight Line Pull. Any Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit. NEVER Re-Use a Connecting Link DO NOT EXCEED THE WORKING LOAD LIMIT
$17.42 MSRP $ 10.22
Qty:
add to cart
Part #:511913
5/16" Eye Grab Hook, Grade 43, Zinc Plated Forged Steel Grade 43 UPC Tagged Grab Hooks Are Designed to Grab a Chain Link and Hold it in Place DO NOT EXCEED THE WORKING LOAD LIMIT
$4.92 MSRP $ 2.81
Qty:
add to cart
Part #:511926
5/16" Eye Slip Hook, Grade 43, Zinc Plated Forged Steel Grade 43 UPC Tagged Slip Hooks Are Designed to Allow Chain to Slip Through the Hook DO NOT EXCEED THE WORKING LOAD LIMIT
$8.47 MSRP $ 4.97
Qty:
add to cart
Part #:519625
Ultra-Thin Nitrile Coated, Gray 13 Gauge Nylon Knit Import
$ 1.50 PR
Qty:
add to cart
PR
$ 22.31 PR
Qty:
add to cart
PR
Part #:502826
#1 Double Loop (Inco) Chain, Zinc Plated, 100' per Carton Farm and Animal Chains, and Many General-Purpose Applications Standard Material Low Carbon Steel Standard Finish Zinc Plated, Galvanized Design Factor 4 to 1 Packaged in Cartons, Order Unit is "Feet" Note Avoid Twisting in Suspension Applications Campbell Recommends The Use of Proof Coil or Straight Link Coil Chain for Swing Set Applications Do Not Use for Overhead Lifting DO NOT EXCEED THE WORKING LOAD LIMIT
$0.92 MSRP $ 0.57
Qty:
add to cart
closeout
Part #:506614
CLOSEOUTS Only 2 Left!
$43.83 MSRP $ 29.37
Qty:
add to cart
Part #:333-RWGD101L
Radians RWGD101 AXIS D2&trade Dyneema&reg Cut Protection Level A3 Glove Dyneema&reg Diamond Technology offers maximum protection over traditional materials like aramid, leather, nylon and polyethylene with glass fiber. Dyneema&reg Diamond Technology fibers are thinner than generic HMPE fibers and less dense than aramid fibers, making them more comfortable, thinner and cooler to the touch, while still providing advanced cut protection. The RWGD101, an Axis D2&trade Series glove with Dyneema&reg Diamond Technology, has an ANSI Cut rating of A3 and an EN388 cut rating of 5. The RWGD101 glove features a 13 gauge white polyester shell with Dyneema&reg Diamond Technology and a gray PU palm coating to provide significant protection against abrasion and cuts.
$11.43 MSRP $ 8.79
Qty:
add to cart
Part #:463244
COMMAND&trade A2 PU (12 PACK) Polyurethane Command&trade Touchscreen Coated Palm 18 Gauge HPPE/Steel Knit Color Coded Thumb Saddle Reinforcement Packaged for Vending RATING AND SPECS EN 388 RATING3X42C ANSI CUT RATING A2 ANSI CUT GRAMS753g ANSI PUNCTURE RATING4 PALM MATERIALPolyurethane GRIP RATING Dry 5/5 &bull Wet 5/5 &bull Oily 5/5
$9.99 MSRP $ 5.85
Qty:
add to cart
Part #:841-150-16754
Country of Origin PEOPLE'S REPUBLIC OF CHINA. HAZMAT Item NO. Special Order Item NO.:
$ 17.99 PR
Qty:
add to cart
Part #:920062
Five layers of protection providing a high level of breathability and protection against dry particulates and water based light liquid sprays and splashes. Good for use in industrial manufacturing, paper industry, food processing and any heavy dust environment. When extra protection is needed this attached hood and elastic wrist and ankles does the trick to keep dirt and debris out Full length zipper front and exceptional strength for easy donning ANSI Sized for a wide range of motion Elastic waistband for improved fit Serged seams Latex Free NFPA 99 compliant antistatic material One time use product
$ 3.85
Qty:
add to cart
Part #:463254
Foam Nitrile Command&trade Touchscreen Coated Palm 18 Gauge HPPE/Steel Knit Color Coded Thumb Saddle Reinforcement RATING AND SPECS EN 388 RATING4X42C ANSI CUT RATING A3 ANSI CUT GRAMS 1469g ANSI PUNCTURE RATING 4 PALM MATERIAL Foam Nitrile GRIP RATING Dry 5/5 &bull Wet 5/5 &bull Oily 4/5
$10.99 MSRP $ 6.85
Qty:
add to cart
 
Displaying: 25 - 46 of 46 Matching Items