1in
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Size: 1in 13 35 XL
Part #:500567
-
#35 Sash Chain, Zinc Plated, 100' per Carton
Counter-Balance Chain for Double Hung Window Sashes
Also for Arc Lamp Chain, Animal Chain
Standard Material Low Carbon Steel
Standard Finish Zinc Plated, Copper Glo, Solid Bronze
Design Factor 4 to 1
Packaged in Cartons, Order Unit is "Feet"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:504778
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:511901
-
1" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
Qty:
Qty:
Part #:800672
- The Neese Economy Series is basic rain wear to keep on hand for emergency weather conditions, and is made of durable water resistant PVC over polyester. The Economy Rain Coat is 48" in length and has a stand up collar and detachable hood.
PVC (.35mm) on Polyester
Stand-up collar with snaps and detachable hood
Raglan shoulder design with underarm vents
Vented upper back
Snap front closure
Lower front left and right side slash pockets
Coat is minimum of 48&rdquo long
Qty:
Qty:
Part #:554964
- MCR Safety Mustang Leather Welding Work Gloves Premium Top Grain Cowskin Leather 4.5 Inch Split Leather Gauntlet Cuff
Only the finest top grain leather go into our MIG/TIG welding options. Sewn with DuPont&trade Kevlar® thread to resist sparks and sharp metals which can unravel most gloves, you will find these gloves a great long-term value. Low heat welding often requires optimal dexterity which affords great attention to detail. You'll find features on the 4950 include Premium grade cream grain cow leather, 4.5 Inch russet split gauntlet cuff and wing thumb. If you are looking for the best leather welding gloves, look no further than MCR Safety!
Part #:506852
-
9 oz FR Cotton Jacket - 30" Green
Cool, comfortable, and washable. Offers protection for light welding and from light sparks.
9 oz flame retardant 100% cotton Weldlite&trade fabric meets ASTM D6413-10
30" length
Relaxed fit design offers comfort for all-day wearability
Adjustable snap wrist, and large inside pocket
Leather reinforced, black anodized non-reflective snaps
Weldlite&trade high quality fabric is anti-static, rot and mildew resistant
Maintains its flame resistance for up to 50 home or 25 commercial washings
Sizes XS-6XL
$
21.50
Qty:
Part #:511947
-
1" Heavy Wire Rope Thimble, Galvanized
Standard Material Hot Rolled, Mild Steel
Galvanized
Imported
A Thimble is a Wear Pad That Protects the Rope From Cuts, Kinking and Abrasions. Always Use An Appropriate Thimble When Making An Eye in a Rope.
When it is Necessary to Open a Thimble to Insert a Fitting, Make Sure the Points are Properly Aligned When the Thimble is Closed. Inspect Carefully for Cracks.
Thimbles ARE NOT Designed for Load Carrying Purposes Therefore Working Load Limits Have Not Been Established.
Qty:
Part #:512137
- Specifications Case Qty:
- 12 per bag / 120 per case Packaging
Qty:
Part #:512233
- Radians ST11 Class 2 Hi-Viz T-Shirt with Max-Dri&trade Moisture Wicking Mesh.
This safety T-Shirt is made with an arid Birdseye Mesh allowing for maximum breathability, without compromising durability. The stripes are adhered by heat transfer rather than sewn on, making the safety T-shirt wear much more like a regular T-shirt. The wicking properties improve hot weather comfort making it feel much cooler. The front pocket does not include reflective material to allow for corporate imprints.
Qty:
Part #:512242
-
Radians SJ01B-3 Type R, Class 3, Long Sleeve Hooded Sweatshirt with zipper closure offers superior warmth while keeping you visible. Color blocking at the bottom conceals dirt.
Black elastic knit waistband and cuffs.
Low Piling Polyester fleece material.
Color blocking at the bottom.
2&rdquo silver reflective tape.
Full front zipper closure.
Two lower pouch pockets.
Hood with adjustable pull cords.
Custom imprinting available on left chest and back center.
25 Wash Max.
Meets ANSI/ISEA 107-2015 Standards.
Qty:
Part #:512254
-
Radians SJ11QB Class 3 weather proof Bomber Jacket with a quilted liner makes it very easy to slip on and off over other fleece or other warm outwear.
Quilted Liner 160g/m2
Color blocked bottom
2" silver reflective tape
PU coated weather proof 300D oxford polyester shell
Concealed attached hood
Elastic waistband and cuffs
Zippered, lined slash pockets
3D flap covered cell phone / radio chest pocket
Two lower zipper closure lined pockets
One inside open chest pocket
Mic tabs on both shoulders.
Qty:
Part #:512265
Qty:
Part #:512530
- The RWG603 Cut Protection Sandy Foam Nitrile Coated Glove by Radians has an ANSI Cut rating of A5 and an EN388 cut rating of 5. The high visibility red sandy foam nitrile palm coating provides a strong grip in both wet and dry applications. The dense TPR overlays on the back of the hand provide added impact protection. This 13 gauge high performance glove is ideal for applications that need both cut and abrasion resistance along with the ability to grip objects.
Applications Petrochem Industry, Automotive, Construction, Manufacturing, Material Handling
Qty:
Part #:808492
- Easily stretch over large work boots
Workbrutes® G2 are wider and have more room in the toe for the ideal fit over safety toe work boots and other large shoes, while high-quality PVC provides ultimate protection from liquids, mud and harsh chemical environments.
Product Details
17-inch height overshoe
Seamless injection-molding for 100% liquidproof protection
Expansion pleats for easy donning even over work boots
Thumb pocket at the top allows a non-slip grip for easy on
Frigiflex® PVC compound stays stretchy & flexible in cold temps
Increased thickness in the heel, toe & cleats for longer life
No lining for easy cleaning, laundering and decontamination
Molded-in buttons and holes for ideal fit and protection
High-stretch upper with durable, abrasion resistant outsole
Heavy-duty heel kick for hands-free removal
Part #:521006
- Lightweight Fall-Arrest Harness, X-Large
&bull Designed to arrest free falls and distribute impact forces over thighs, pelvis, chest and shoulders as required by OSHA&bull For workers who also need positioning, this harness allows insertion of an existing positioning belt through 5-Inch (127 mm) backstrap loops on the harness&bull Easily adjusts for proper fit and function&bull Waist strap has friction-style buckle for adjustments over a continuous range of sizes&bull Seat strap adds extra comfort and support&bull Friction slide adjusters hold shoulder straps in place so the user does not need to readjust for each use&bull Drop-forged circle D-ring has corrosion-resistant finish, wear-minimizing roller and is proof-loaded to meet OSHA regulations&bull Durable 1-3/4'' (44 mm) Type 13, or equivalent, nylon webbing harness construction&bull Tongue buckles with grommeted leg straps provide comfortable fit over a range of sizes&bull Identity and warning tags and/or labels are reminders of proper application and inspection procedures. The Klein name, model, date of manufacture and OPE-system application symbol(s) are permanently and clearly inscribed on these tags and labels&bull Certified and compliant with ANSI and CSA requirements
Qty:
Part #:202082
- Radians SV2Z Economy Type R Class 2 Safety Vest with Zipper Closure is compliant protection at an economical price. Excellent choice for extreme work environments like asphalt paving that greatly reduce the useful life of a vest, or protection for short-term labor.
Qty:
Part #:200045
- Description
Class 2
2&rdquo Silver reflective tape
100% ANSI Polyester Mesh
Dual sized
Pockets 1 inside left chest w/ hook & loop closure
Hook & Loop closure
$
7.50
Qty:
Part #:205225
- Description
Class 2
2&rdquo 3M&trade Scotchlite&trade Reflective Material
100% ANSI Polyester Tricot
Zipper closure
$
24.83
Qty:
$
30.87
Qty:
$
30.65
Qty:
Part #:517553
- Features
3/4 Dip, Impermeable Nitrile Base Coating
Sandy Nitrile Command&trade Touchscreen Coated Palm
Insulated 13 Gauge HPPE/Steel Blended Knit
Color Coded Thumb Saddle Reinforcement
Applications Cold Storage, Manufacturing, Frozen Food Processing, General Outdoor Activities
Displaying: 1 - 24 of 48 Matching Items