2in
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Size: 2in 3/4 in #4 7/8 in
$
0.90
Qty:
Part #:202682
- Feature Method (ASTM) Value (English) Overall Thickness D-2103 5.0 mil (Nominal)Foil Thickness D-2103 .35 milWeight D-2103 27.5 lbs / 1,000 ft2Tensile Strength D-882 Length7,651 psiElongation D-882 Length 89%Printability D-2578 Plastic Density D-792-08
Qty:
closeout
$187.74 MSRP
$
110.24
Part #:511960
- CLOSEOUTS Only 1 Left!
-
3/4" x 6" Jaw & Jaw Turnbuckle, Forged Carbon Steel, Galvanized(Discontinued being replaced by TB108-J-J-HDG)
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class G
Jaws on Sizes 1/4&rdquo Through 5/8&rdquo Have Hex Head Bolt and Nut
Jaws on Sizes 3/4&rdquo Through 1-1/2&rdquo Have Cotter Key and Bolt
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
closeout
$168.18 MSRP
$
96.04
Part #:511961
- CLOSEOUTS Only 5 Left!
-
3/4" x 9" Jaw & Jaw Turnbuckle, Forged Carbon Steel, Galvanized(Discontinued being replaced by TB108-9-J-J)
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class G
Jaws on Sizes 1/4&rdquo Through 5/8&rdquo Have Hex Head Bolt and Nut
Jaws on Sizes 3/4&rdquo Through 1-1/2&rdquo Have Cotter Key and Bolt
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:808040
- Product Highlights
For Use with Printer BMP®71 Label Printer
Material Number B-595 (View Technical Data Sheet)
Recommended Ribbon M71-R6000
Overview
This durable, low-shrink vinyl with ultra-aggressive adhesive is ideal for labeling pipes, equipment, shelves and nearly any other industrial surface.
This B-595 vinyl material with permanent acrylic adhesive keeps labels adhered in harsh climates and is resistant to chemicals, oils and detergents
Vinyl tape is ideal for use in pipe marking, warehouse and safety identification, arc flash and visual workplace labels in both indoor and outdoor use
Permanent adhesive tape adheres to surfaces that are smooth, rough or powder coated, and to irregular surfaces or surfaces with low surface energy
Prints black text on white vinyl background with a clean gloss finish that is resistant to exposure to chemicals, grease, oil, and cleaning agents.
Durable labeling tape with an average outdoor durability of 8-10 years in temperatures ranging from -40° F to 180° F
A ribbon is required to print this material. Use Part Number M71-R6000
$
200.99
Qty:
closeout
$39.88 MSRP
$
36.30
Part #:511852
- CLOSEOUTS Only 12 Left!
-
7/8" Wire Rope Clip, Forged Carbon Steel, Galvanized(Discontinued being replaced by 490-M253)
Base is Drop-Forged Carbon Steel
Hot Galvanized to ASTM A-153 to Resist Rust and Corrosion
U-Bolts Are colored Blue for Identification Purposes and Use Heavy Duty Hex Nuts (UNC-2A)
Designed to Meet Federal Specifications, FF-C-450, Type 1, Class 1
Designed to Meet or Exceed All Requirements of ASME B30.26 Including Identification, Ductility, Design Factor and Temperature
Permanently Marked with Size and Manufacturer
Sizes 1/4" and Above Marked with USA and Date Code
Sizes 1/8" Through 1-1/4" Are Supplied Bagged and Unassembled
Note See Application and Warning Information
Qty:
closeout
$44.30 MSRP
$
29.85
Part #:204342
- CLOSEOUTS Only 3 Left!
- Feature Method (ASTM) Value (English)Overall Thickness D-2103 5.0 mil (Nominal)Foil Thickness D-2103 .35 milWeight D-2103 27.5 lbs / 1,000 ft2Tensile Strength D-882 Length 7,651 psi LengthElongation D-882 Length 89%Printability D-2578Plastic Density D-792-08
Qty:
Part #:502831
- #4 Double Loop (Inco) Chain, Zinc Coated, 100' per Carton
Farm and Animal Chains, and Many General-Purpose Applications
Standard Material Low Carbon Steel
Standard Finish Zinc Plated, Galvanized
Design Factor 4 to 1
Packaged in Cartons, Order Unit is "Feet"
Note Avoid Twisting in Suspension Applications
Campbell Recommends The Use of Proof Coil or Straight Link Coil Chain for Swing Set Applications
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
$
129.09
Qty:
Part #:912260
- Create your own custom crowd control solution with our Mr. Chain Plastic Barrier Chain. Made of lightweight and strong high-density polyethylene, this 2&rdquo plastic link chain is perfect for forming lines, directing crowds, or restricting access to protect people and property. Use the Mr. Chain Plastic Barrier Chain with Mr. Chain stanchions, poles, and cone connectors (all sold separately) to create strong visual barriers in a wide variety of indoor and outdoor settings. This 2" plastic safety chain is UV resistant for long-lasting outdoor use and will not rust.
Versatile plastic safety chain creates a strong visual barrier to protect people and property
Ideal for forming lines, directing crowds, and restricting access in both indoor and outdoor settings
Bulk plastic chain by the foot available in lengths from 25 to 500 feet
Made of lightweight, strong, and durable high-density polyethylene that will not rust
UV resistant and recyclable Made in the USA
This 2&rdquo crowd control plastic chain is recommended for use with Mr. Chain Plastic 2.5&rdquo Stanchions and 2.5&rdquo Ground Poles.
$
0.90
Qty:
Part #:841-262-55302
- Country of Origin TAIWAN; REPUBLIC OF CHINA. HAZMAT Item NO. Special Order Item YES.:
$
59.99
RL
Qty:
Displaying: 1 - 12 of 12 Matching Items