1 in
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Size: 1 in 3/16in 11 S/M
Part #:502912
-
3/16&rdquo Cold Shut, Steel, Zinc Plated
Connections for Chain and Attachments
When Using Cold Shuts with Chain, Use One Size Larger Than Chain Size
With A Hammer, Drive the Open End Through the Cold Shut Eye. Peen the Extended End to Prevent Opening
Order Unit is "Each"
Note Cold Shuts Should Not Be Reused After Closure Has Been Made
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Qty:
Part #:511841
- 3/16" Wire Rope Clip, Electro-Galvanized
If Used on Coated Cable, Remove the Coating From the Assembly Area
Follow Assembly Instructions
Qty:
Part #:807287
- Country of Origin MX:
$
84.73
Qty:
Part #:511937
-
3/16" Wire Rope Thimble, Electro-Galvanized
If Used on Coated Cable, Remove the Coating From the Assembly Area
Follow Assembly Instructions
Qty:
closeout
$22.83 MSRP
$
13.03
Part #:511947
- CLOSEOUTS Only 10 Left!
-
1" Heavy Wire Rope Thimble, Galvanized
Standard Material Hot Rolled, Mild Steel
Galvanized
Imported
A Thimble is a Wear Pad That Protects the Rope From Cuts, Kinking and Abrasions. Always Use An Appropriate Thimble When Making An Eye in a Rope.
When it is Necessary to Open a Thimble to Insert a Fitting, Make Sure the Points are Properly Aligned When the Thimble is Closed. Inspect Carefully for Cracks.
Thimbles ARE NOT Designed for Load Carrying Purposes Therefore Working Load Limits Have Not Been Established.
Qty:
Part #:508012
-
3/16" Grade 30 Proof Coil Chain, Zinc Plated, 250' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:502805
-
3/16" Grade 30 Proof Coil Chain, Zinc Plated, 250' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:800595
- Our Premier G2® boot is tough, yet extremely comfortable. The Premier's unique blend of high molecular weight PVC resins and specialty additives offers superior chemical resistance to concentrates of fats, certain acids, alkalies, hydrocarbons, and other chemicals. That's why it is an excellent choice for food processing and petrochemical applications.
Ideal Applications Suited for various jobs within Food Processing (particularly red meat, turkey, dairy, and beverage), Chemical, and Petroleum Industries. Chemical Resistance Fats, oils, certain acids, alkalies, petroleum hydrocarbons, and other chemicals. Composite safety toe meets or exceeds ASTM F2413 M/I/C EH, and does not transfer cold or set off metal detectors. Calf Relief Expansion (CRE)&trade expands up to 1.5 inches for more calf comfort. Injection molded seamless construction is 100% liquid proof. Soft and flexible upper for all day working comfort. 15&rdquo Ht. with a cutline at 12&rdquo to facilitate fast and clean height modification. Outsole material is soft for excellent slip resistance and walking comfort while offering good abrasion and chemical resistance. Chevron-Plus® outsole provides excellent slip resistance on wet-contaminated and wet-clean surfaces and has more cleat material for longer service life. Beveled heel for reduced back and leg strain. Tread wear indicators to show when half the tread has worn away. Extra thick, removable contour cushion insoles absorb moisture and shock and provide outstanding comfort. Achieved apassing resultfor ASTM F1671 testing.
Electrical Hazard soles and heels are intended to reduce the hazards due to accidental contact with live electrical circuits, electrically energized conductors, parts or apparatus. Electric Hazard soles and heels are not intended for wear in those work environments where volatile chemicals or explosives may be present, where conductive footwear is required.
Warning Electric Hazard features of the soles and heels will deteriorate in wet environments, and when worn with excessive wear on the soles and heels.
closeout
$32.19 MSRP
$
21.57
Qty:
closeout
$5.66 MSRP
$
3.79
Qty:
Part #:806809
-
3/16" Quick Link, Steel, Zinc Plated, #7350
For Fast and Easy Connections Between Two Lengths of Chain
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Do Not Use to Support Human Weight, for Playground or Athletic Equipment, or as a Safety Device
Qty:
Part #:690-0143336
-
3/16" Grade 30 Proof Coil Chain, Galvanized, 150' per Square Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:841-150-21073
- Country of Origin INDONESIA. HAZMAT Item NO. Special Order Item YES.:
$
61.78
CASE
Qty:
Displaying: 1 - 16 of 16 Matching Items