3M
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Brand: 3M Eagle Manufacturing Jackson Safety Ninja
Part #:300554
- NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particlesTwo-strap design with welded dual point attachment helps provide a secure sealCushioning nose foam
Highlights
NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles
Two-strap design with welded dual point attachment helps provide a secure seal
Cushioning nose foam
Lightweight construction promotes greater worker acceptance and may help increase wear time
Lightweight construction promotes greater worker acceptance and may help increase wear time
Advanced electrostatic media is designed for ease of breathing
This classic disposable N95 particulate respirator is designed to help provide comfortable, reliable worker respiratory protection against certain non oil based particles.
3M&trade Particulate Respirator 8210, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. This respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. This respirator can also help reduce inhalation exposures to certain airborne biological particles (examples mold, Bacillus anthracis, Mycobacterium tuberculosis), but cannot eliminate the risk of contracting infection, illness, or disease. The respirator incorporates 3M&rsquos proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection.
This particulate respirator is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain non-oil based particles and provides at least 95 percent filter efficiency.
Breathing hazardous particles can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Particulate Respirator 8210, which is designed to help reduce exposure to certain airborne particles.
WARNING These respirators help reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For proper use, see package instructions, supervisor, or call 3M OH&ESD Technical Service in USA at 1-800-243-4630 and in Canada at 1-800-267-4414.
$
1.27
Qty:
Part #:841-138-14944
- Blade Mounted Cap Adapters, 382 B, 22 in x 14 1/2 in
Jackson Safety Blade Mounted Cap AdaptersProduct DetailsQuick detach bracketsPolyethylene spark deflectorTotally dielectric, all plastic device for slotted capsFace shields are secured with integral plastic lugsCurved plastic channel fits over the bill of the cap
Qty:
Part #:841-138-14381
- Jackson Safety HDG10 Face Shield Headgear
Model K HeadgearProduct DetailsHas spark deflectorSoft, absorbent, wrap-around, foam cushioned sweatband gently hugs natural shape of head
Qty:
Part #:841-138-14683
- Manual-Arc Welding Electrode Holders, 200 A, Aluminum Alloy, For 4 AWG-1/0 AWG
Jackson Safety Manual-Arc Welding Electrode HoldersProduct DetailsFully insulated springIntegral groovesIntegrated jaw pattern for multi-position electrode holding
Qty:
Part #:841-138-14693
- Electrode Holder Parts for 14682 (A-W) Electrode Holder
Jackson Safety Electrode Holder PartsProduct DetailsReplacement part for electrode holderQuality component extends life of holder for continued reliable performance
Qty:
Part #:841-138-14694
- Electrode Holder Parts for JH-2 A-W JH-2A-W
Jackson Safety Electrode Holder PartsProduct DetailsReplacement part for electrode holderQuality component extends life of holder for continued reliable performance
Qty:
Part #:841-138-14949
- Blade Mounted Cap Adapters, 82BM Metal Campmount
Jackson Safety Blade Mounted Cap AdaptersProduct DetailsQuick detach bracketsPolyethylene spark deflectorTotally dielectric, all plastic device for slotted capsFace shields are secured with integral plastic lugsCurved plastic channel fits over the bill of the cap
Qty:
Part #:841-138-29079
- F30 Acetate Face Shields, 34-40 Acetate, Clear, 15 1/2 in x 9 in
Jackson Safety F30 Acetate Face ShieldsProduct DetailsIdeal for scratch resistance and premium opticsHigh-grade cast sheet acetate protects against splash99.9% UV protectionTesting and ApprovalsMeets ANSI Z87.1 Standard
Qty:
Part #:841-138-29087
- Jackson Safety F20 Polycarbonate Face ShieldsProduct DetailsProvide a high degree of protection on the jobIdeal for situations that require impact and heat resistanceOptical-grade polycarbonate from extruded sheets99.9% UV protectionGreat for protection while grinding also excellent for debris and splash protectionTesting and ApprovalsMeets ANSI Z87.1 Standard
Qty:
Part #:841-138-46148
- NexGen Digital Variable ADF Welding Helmets, 9-13, Black, 3.8 in x 2.35 in
Jackson Safety NexGen Digital Variable ADF Welding HelmetsProduct DetailsDigital controls feature variable shades, sensitivity and delay adjustmentsFour independent sensors positioned to reduce possibility of blockage during weldOperates with solar lithium batteries (included) and has low-battery indicatorVersatile 3-N-1 built-in function Weld, Torch, GrindAmber view lens allows for enhanced clarity of weld puddleTechnology allows unit to detect welds less than 5 ampsBuilt-in mag lens holder.
Qty:
Part #:800057
- 1 Gallon Steel Safety Can for Flammables, Type I, Flame Arrester, Funnel, Red - UI10FS
The rugged and reliable 1 gal (3.8 l) Eagle Red Type I Steel Safety Can for Flammables (model UI10FS) weighs 3.52 lbs (1.67 kg) when empty and roughly 10 lbs (5 kg) when full, making it great for quick fuel ups. The pour or fill hole has an inner diameter of 1.65 in (4.19 cm) and the attached funnel helps to prevent spills and splashes when pouring into smaller tanks. And because this can measures 8 in (20.5 cm) high with an outer diameter of 9 in (22.9 cm), it&rsquos easy to store in your Eagle safety cabinet.
$
77.25
Qty:
Qty:
Part #:809482
- 1206 Series FM Approved SafeSmoker Receptacles, 5 qt, 38" h, Polyethylene, Beige
UPC 048441001613
Qty:
Part #:841-127-N9690L
- MCR Safety Ninja® Ice GlovesProduct DetailsDesigned with HPT coating (Hydropellent Technology)Nylon outer shell with an acrylic terry interior linerRepels liquids while retaining strong gripSuitable for cold weather/storage applicationsCoating remains soft in temperatures as low as -58 F°Lining treated with Actifresh to reduce bacteria buildup
$
9.10
Qty:
Part #:808743
- Overview
Eagle Type 1 Safety Cans are constructed of 24-gauge hot dipped galvanized steel. Eagle safety cans are accepted under CARB, meet OSHA and NFPA Code 30 requirements, and are UL, ULC and FM Approved for safe handling and storage of gasoline and other flammable liquids. Available in a variety of colors for the safe handling and storage of flammables (red), kerosene (blue), diesel (yellow) and combustible liquids such as oils (green). Available with or without a funnel.
Key Benefits
24-gauge hot dipped galvanized steel construction
Spring closing lid for filling and pouring
Patented comfort grip
Non-sparking flame arrestor
Baked on powder coat finish
Double interlock, no-weld bottom seam
Deep drawn construction means not top or side seams
Optional funnel fits unleaded fuel tanks
Qty:
Part #:841-138-22516
- Jackson Safety V60 Nemesis RX Safety EyewearProduct DetailsCheaters" style with diopters for vision assistanceLarger lens for wraparound impact protectionEnhanced nose piece design to channel away sweatBase Curve 8IncludesNeck CordTesting and ApprovalsANSI Z87.1+ 2010
Qty:
Part #:841-138-14699
- Jackson Safety Electrode Holder PartsProduct DetailsReplacement part for electrode holderQuality component extends life of holder for continued reliable performance
Qty:
Part #:841-138-14730
- Jackson Safety Ground ClampsProduct DetailsLarge contact areas, high-clamping pressure and long-levered handles for easy jaw openingClamps have fully insulated pivots and springsThe cable jacket is held securely inside the conductor body with a cable bar for improved holding ability and longer cable life
Qty:
Part #:841-138-14975
- Jackson Safety WH10 HSL 100 Passive Welding HelmetProduct DetailsNarrow shell design is perfect for work in tight spacesExtended front increases throat protection from sparks, slag and other physical hazardsHard hat adaptable using 187-S (15968)ADF adaptableTesting and ApprovalsANSI Z87.1 2010 CSA Compliant
Qty:
closeout
$
1.32
Qty:
Displaying: 1 - 24 of 66 Matching Items