5/8in
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Size: 5/8in 5 Gallon 32ft One Size Fits Most
Part #:511896
-
5/8" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:505252
- The D6232-2 Fiberglass Two-Section 32ft Extension Ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300lb, the ladder is durable and long lasting. The exclusive Alflo® rung joint means Twist-Proof® performance on the job. The Traction-Tred® D rungs are slip-resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
Qty:
closeout
$67.30 MSRP
$
38.42
Part #:507665
- CLOSEOUTS Only 4 Left!
-
5/8" Clevis Grab Hook, Forged Steel, Self Colored
Material is Drop-Forged Carbon Steel (Grade 30 & 43) or Heat-Treated Alloy Steel
Grade 30 & 43 Hooks Available Self-Colored or Zinc-Plated
Alloy Hooks Are Painted Orange and Stamped &rdquoAlloy&rdquo 3.5 to 1 Design Factor
Alloy Hook Sizes 1/4" to 3/8" are Supplied Individually Bagged and Unassembled
Self-Colored Finish Hooks Are Bulk Packed, Zinc Plated Hooks Are Packed 10 Per Box
Grab Hooks Are Designed to Grab a Chain Link and Hold it in Place
Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:808743
- Overview
Eagle Type 1 Safety Cans are constructed of 24-gauge hot dipped galvanized steel. Eagle safety cans are accepted under CARB, meet OSHA and NFPA Code 30 requirements, and are UL, ULC and FM Approved for safe handling and storage of gasoline and other flammable liquids. Available in a variety of colors for the safe handling and storage of flammables (red), kerosene (blue), diesel (yellow) and combustible liquids such as oils (green). Available with or without a funnel.
Key Benefits
24-gauge hot dipped galvanized steel construction
Spring closing lid for filling and pouring
Patented comfort grip
Non-sparking flame arrestor
Baked on powder coat finish
Double interlock, no-weld bottom seam
Deep drawn construction means not top or side seams
Optional funnel fits unleaded fuel tanks
Qty:
Part #:511957
- Specifications
Material
Galvanized
Diameter & Thread
5/8-11
Take-Up
6
OAL Closed Length
1411/16
Weight Lbs.
2.53
Rated Capacity Lbs.
3,200
$
36.99
Qty:
closeout
$37.18 MSRP
$
21.82
Part #:511876
- CLOSEOUTS Only 19 Left!
-
5/8" Connecting Link, Forged Carbon Steel, Self Colored, 10 Pcs per Box
Drop-Forged Heat-Treated Carbon or Alloy Steel
Standard Finish is Self-Colored or Galvanized to Meet ASTM A-153 Specifications
4 to 1 Design Factor
For Proper Closure, Peen the Prongs to Fill the Hole of the Mating Half as Much as Possible
Meets Design Requirements of Federal Specification RR-C-271D, Type II
Make Sure the Connecting Link Used is the Same Size as the Components Being Joined. e.g., a 3/8 in. Connecting Link is Used with 3/8 in. Chain
Any Assembly Made Using Connecting Links Should be Rated at the Working Load Limit of the Weakest Component.
The Working Load Limit of Connecting Links is Based on a Straight Line Pull. Any Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit.
NEVER Re-Use a Connecting Link
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
closeout
$21.51 MSRP
$
18.65
Part #:511850
- CLOSEOUTS Only 17 Left!
-
5/8" Wire Rope Clip, Forged Carbon Steel, Galvanized (DIscontinued being replaced with 490-M251)
Base is Drop-Forged Carbon Steel
Hot Galvanized to ASTM A-153 to Resist Rust and Corrosion
U-Bolts Are colored Blue for Identification Purposes and Use Heavy Duty Hex Nuts (UNC-2A)
Designed to Meet Federal Specifications, FF-C-450, Type 1, Class 1
Designed to Meet or Exceed All Requirements of ASME B30.26 Including Identification, Ductility, Design Factor and Temperature
Permanently Marked with Size and Manufacturer
Sizes 1/4" and Above Marked with USA and Date Code
Sizes 1/8" Through 1-1/4" Are Supplied Bagged and Unassembled
Note See Application and Warning Information
Qty:
Part #:511944
-
5/8" Heavy Wire Rope Thimble, Galvanized
Standard Material Hot Rolled, Mild Steel
Galvanized
Imported
A Thimble is a Wear Pad That Protects the Rope From Cuts, Kinking and Abrasions. Always Use An Appropriate Thimble When Making An Eye in a Rope.
When it is Necessary to Open a Thimble to Insert a Fitting, Make Sure the Points are Properly Aligned When the Thimble is Closed. Inspect Carefully for Cracks.
Thimbles ARE NOT Designed for Load Carrying Purposes Therefore Working Load Limits Have Not Been Established.
Qty:
Part #:504446
- 5 Gallon Seat Top Water Jug Without Cup Dispenser
Hydrate the entire team on the jobsite or on the field
Holds ice for up to 3 days
Recessed and angled drip-resistant spigot for easy dispensing
Reinforced handles for strength and product longevity
Keeper cord affixes lid to cooler for cleanliness and loss prevention
Pressure-fit lid won't trap dirt or mold
UV inhibitors and infrared technology protect the cooler against sun damage
Seat-top lid provides sitting surface
Item # 00042316
Qty:
Part #:4012-PLASTIC GOWN
- Made Locally in Ashtabula, OH!
Cerberus Safety Products protective gowns are designed to be disposable and convenient. Each gown is one-size-fits-all for adults, made from 0.0015in thick polyethylene film. Plastic welded, these gowns fit over the head and tie around the user, either in front or back depending on the individual's needs.
FD universal protective gown, suitable for standard and contact precautions, food service, and nursing applications.
Waist ties for a more secure fit
Packaged in rolls seperated by perforation for bulk quantity
Thumb holes for added mobility
Intended to protect from the minimal risk transfer of microorganisms and fluid
Qty:
Part #:512902
- Wear super-versatile, rechargeable safety lights on your body wherever you work or play. The COASTSA300 High-Vis Lighted Safety Armbandshines high-vis safety orange light in two modes&mdashsolid and flashing&mdashto increase your safety in dark and chaotic environments. Designed for no-pinch comfort, the armband is constructed with flexible straps so that you can place light right where you need it&mdashon the upper arm or wrist or even around your knee or ankle.The armbands are made from water-resistant material to ensure a long life, and the LED light can be removed when the band needs washing.
Qty:
Part #:841-385-451
- Country of Origin UNITED STATES. HAZMAT Item NO. Special Order Item NO.:
Qty:
Displaying: 1 - 12 of 12 Matching Items