3in
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Size: 3in 7/16in 20ft x 30ft 32ft
Part #:502360
- All-Purpose Blue Poly Tarp
Tear and UV resistant mold and mildew resistant will not rot nor shrink.
Ideal for camping, hunting, tent fly, storage cover, canopy, boat cover, woodpile cover.
CORNERS AND GROMMETS
Rust-Proof Aluminum Grommetsevery 3 ft and on each corner.
OUTER EDGE All edges heat-sealed and reinforcedwith polyethylene rope.
CROSS WEAVE Polyethylene yarn woven for durability.
RAIN AND UV PROTECTION Water proof and UV resistant.
COLOR BLUE
$
43.55
Qty:
Part #:201554
- Barricade Safety Tapes 2 Mil Caution Tape 3" Wide x 1,000ft
&bull Rolls are individually labeled with UPC code&bull 2" Black characters on 3" wide yellow tape unless indicated.&bull Ask us about other legends and sizes available&bull Boxed packaging
Qty:
Part #:200443
- Empire® Level Safety Barricade TapesProduct DetailsSafety tapes indicating warning or danger areasLarge bold lettering is easy to read at a distanceDurable plastic material remains pliant in cold weather
Qty:
Part #:505252
- The D6232-2 Fiberglass Two-Section 32ft Extension Ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300lb, the ladder is durable and long lasting. The exclusive Alflo® rung joint means Twist-Proof® performance on the job. The Traction-Tred® D rungs are slip-resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
Qty:
Part #:506505
- Floor Stripe&trade High Performance Message Marking Tapes Identify and call attention to hazards throughout your facility. Printed 1-mil polyester tapes have 1-mil gloss over-laminate. Acrylic adhesive backing provides high tack and bond to a variety of smooth and rough surfaces. Available 3" wide x 50-ft. roll. Tapes can be custom printed with your message, graphic, or logo. Contact us with part number PTP155.
closeout
$12.46 MSRP
$
7.11
Part #:511845
- CLOSEOUTS Only 5 Left!
-
7/16" Wire Rope Clip, Forged Carbon Steel, Galvanized (Being replaced by Columbus Mckinnon 2/Pack 490-M249-2)
Base is Drop-Forged Carbon Steel
Hot Galvanized to ASTM A-153 to Resist Rust and Corrosion
U-Bolts Are colored Blue for Identification Purposes and Use Heavy Duty Hex Nuts (UNC-2A)
Designed to Meet Federal Specifications, FF-C-450, Type 1, Class 1
Designed to Meet or Exceed All Requirements of ASME B30.26 Including Identification, Ductility, Design Factor and Temperature
Permanently Marked with Size and Manufacturer
Sizes 1/4" and Above Marked with USA and Date Code
Sizes 1/8" Through 1-1/4" Are Supplied Bagged and Unassembled
Note See Application and Warning Information
Qty:
Part #:511894
-
7/16" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Qty:
Part #:202683
- Feature Method (ASTM) Value (English) Overall Thickness D-2103 5.0 mil (Nominal)Foil Thickness D-2103 .35 milWeight D-2103 27.5 lbs / 1,000 ft2 13.4 kg / 100 m2Tensile Strength D-882 Length 7,651 psiElongation D-882 Length 89%Printability D-2578 Plastic Density D-792-08
Qty:
Part #:330-TGS2030
- Heavy-Duty 12 by 12 Cross Weave Reversible Green/Silver 8-mil Poly Tarp
Durable for requested and extended use on tough job sites.
KOTAP ADVANTAGES
LAST LONGER THAN REGULAR TARPS.
STRONGER THAN COMPETING TARPS12X12 WEAVE VS 10X10 OR 10X12.
STRONG UV PROTECTIONSILVER SIDE REFLECTS UV RAYS,THEREBY OFFERING ADDITIONALPROTECTION TO TARP CONTENTS.
STRONG GROMMET APPLICATIONSGROMMMETS SPACED EVERY 1.5&rsquoAND REINFORCED PLASTIC CORNERBARS.
SPECIFICATIONS
Fabric Weave 12X12
8-mil thickness
Woven & coated polyethylene
Strong UV Protection Silver side reflects UV rays, offering more sun protection
All four edges heat-sealed and reinforced with polyethylenerope in hem
Rust-proof aluminum grommets every 1.5 ft and on each corner
Corners reinforced with solid plastic bar
COLOR GREEN / SILVER
$
57.25
Qty:
Part #:690-T7645036
-
7/16" Spring Snap Link, Steel, Zinc Plated, #2450
Ideal for Hanging Keys and Other Utility Items From Belt
Fast and Easy to Connect and Disconnect
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Do Not Use to Support Human Weight, for Playground or Athletic Equipment, or as a Safety Device
Qty:
Displaying: 1 - 13 of 13 Matching Items