ANSI Cut Gloves
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Safety Details: ANSI Cut Gloves Welding Gloves
- Personal Protective Equipment (PPE): Hand Protection
Part #:503802
-
PIP® Superior Grade Split Cowhide Leather Welder's Glove with Cotton/Foam Lining and DuPont&trade Kevlar® Stitching
Side Split Cowhide leather construction provides comfort, durability, excellent abrasion resistance, and breathability
Side Split leather is durable and provides excellent protection due to its dense fibers
Fully welted to protect seams from abrasions
Stitched with Kevlar® adding strength and burn resistance
Cotton/foam lining gives welders additional heat protection but still absorbs moisture
One-piece back for extended glove life
Wing thumb increases comfort in open-handed work
Double reinforced palm and thumb strap increases durability and provides added protection at common wear points
Part #:504775
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:504778
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:554964
- MCR Safety Mustang Leather Welding Work Gloves Premium Top Grain Cowskin Leather 4.5 Inch Split Leather Gauntlet Cuff
Only the finest top grain leather go into our MIG/TIG welding options. Sewn with DuPont&trade Kevlar® thread to resist sparks and sharp metals which can unravel most gloves, you will find these gloves a great long-term value. Low heat welding often requires optimal dexterity which affords great attention to detail. You'll find features on the 4950 include Premium grade cream grain cow leather, 4.5 Inch russet split gauntlet cuff and wing thumb. If you are looking for the best leather welding gloves, look no further than MCR Safety!
closeout
$17.67 MSRP
$
11.88
Part #:512500
- CLOSEOUTS Only 1 Left!
- The RWG603 Cut Protection Sandy Foam Nitrile Coated Glove by Radians has an ANSI Cut rating of A5 and an EN388 cut rating of 5. The high visibility red sandy foam nitrile palm coating provides a strong grip in both wet and dry applications. The dense TPR overlays on the back of the hand provide added impact protection. This 13 gauge high performance glove is ideal for applications that need both cut and abrasion resistance along with the ability to grip objects.
Applications Petrochem Industry, Automotive, Construction, Manufacturing, Material Handling
Qty:
Part #:512530
- The RWG603 Cut Protection Sandy Foam Nitrile Coated Glove by Radians has an ANSI Cut rating of A5 and an EN388 cut rating of 5. The high visibility red sandy foam nitrile palm coating provides a strong grip in both wet and dry applications. The dense TPR overlays on the back of the hand provide added impact protection. This 13 gauge high performance glove is ideal for applications that need both cut and abrasion resistance along with the ability to grip objects.
Applications Petrochem Industry, Automotive, Construction, Manufacturing, Material Handling
Qty:
Part #:554937
- MCR Safety Mustang Leather Welding Work Gloves Premium Top Grain Cowskin Leather 4.5 Inch Split Leather Gauntlet Cuff
Only the finest top grain leather go into our MIG/TIG welding options. Sewn with DuPont&trade Kevlar® thread to resist sparks and sharp metals which can unravel most gloves, you will find these gloves a great long-term value. Low heat welding often requires optimal dexterity which affords great attention to detail. You'll find features on the 4950 include Premium grade cream grain cow leather, 4.5 Inch russet split gauntlet cuff and wing thumb. If you are looking for the best leather welding gloves, look no further than MCR Safety!
Qty:
Part #:333-RWGD101L
- Radians RWGD101 AXIS D2&trade Dyneema® Cut Protection Level A3 Glove
Dyneema® Diamond Technology offers maximum protection over traditional materials like aramid, leather, nylon and polyethylene with glass fiber. Dyneema® Diamond Technology fibers are thinner than generic HMPE fibers and less dense than aramid fibers, making them more comfortable, thinner and cooler to the touch, while still providing advanced cut protection. The RWGD101, an Axis D2&trade Series glove with Dyneema® Diamond Technology, has an ANSI Cut rating of A3 and an EN388 cut rating of 5. The RWGD101 glove features a 13 gauge white polyester shell with Dyneema® Diamond Technology and a gray PU palm coating to provide significant protection against abrasion and cuts.
Qty:
Part #:333-RWGD101S
- Radians RWGD101 AXIS D2&trade Dyneema® Cut Protection Level A3 Glove
Dyneema® Diamond Technology offers maximum protection over traditional materials like aramid, leather, nylon and polyethylene with glass fiber. Dyneema® Diamond Technology fibers are thinner than generic HMPE fibers and less dense than aramid fibers, making them more comfortable, thinner and cooler to the touch, while still providing advanced cut protection. The RWGD101, an Axis D2&trade Series glove with Dyneema® Diamond Technology, has an ANSI Cut rating of A3 and an EN388 cut rating of 5. The RWGD101 glove features a 13 gauge white polyester shell with Dyneema® Diamond Technology and a gray PU palm coating to provide significant protection against abrasion and cuts.
Qty:
Part #:333-RWGD101XL
- Radians RWGD101 AXIS D2&trade Dyneema® Cut Protection Level A3 Glove
Dyneema® Diamond Technology offers maximum protection over traditional materials like aramid, leather, nylon and polyethylene with glass fiber. Dyneema® Diamond Technology fibers are thinner than generic HMPE fibers and less dense than aramid fibers, making them more comfortable, thinner and cooler to the touch, while still providing advanced cut protection. The RWGD101, an Axis D2&trade Series glove with Dyneema® Diamond Technology, has an ANSI Cut rating of A3 and an EN388 cut rating of 5. The RWGD101 glove features a 13 gauge white polyester shell with Dyneema® Diamond Technology and a gray PU palm coating to provide significant protection against abrasion and cuts.
Qty:
Part #:46-G03104
Qty:
$
4.92
Qty:
Part #:463243
- COMMAND&trade A2 PU (12 PACK)
Polyurethane Command&trade Touchscreen Coated Palm
18 Gauge HPPE/Steel Knit
Color Coded Thumb Saddle Reinforcement
Packaged for Vending
RATING AND SPECS
EN 388 RATING3X42C
ANSI CUT RATING A2
ANSI CUT GRAMS753g
ANSI PUNCTURE RATING4
PALM MATERIALPolyurethane
GRIP RATING Dry 5/5 &bull Wet 5/5 &bull Oily 5/5
Qty:
Part #:463244
- COMMAND&trade A2 PU (12 PACK)
Polyurethane Command&trade Touchscreen Coated Palm
18 Gauge HPPE/Steel Knit
Color Coded Thumb Saddle Reinforcement
Packaged for Vending
RATING AND SPECS
EN 388 RATING3X42C
ANSI CUT RATING A2
ANSI CUT GRAMS753g
ANSI PUNCTURE RATING4
PALM MATERIALPolyurethane
GRIP RATING Dry 5/5 &bull Wet 5/5 &bull Oily 5/5
Qty:
Part #:463253
- COMMAND&trade A2 PU (12 PACK)
Foam Nitrile Command&trade Touchscreen Coated Palm
18 Gauge HPPE/Steel Knit
Color Coded Thumb Saddle Reinforcement
Packaged for Vending
RATING AND SPECS
EN 388 RATING4X42C
ANSI CUT RATING A3
ANSI CUT GRAMS 1469g
ANSI PUNCTURE RATING 4
PALM MATERIAL Foam Nitrile
GRIP RATING Dry 5/5 &bull Wet 5/5 &bull Oily 4/5
Qty:
Part #:463254
-
Foam Nitrile Command&trade Touchscreen Coated Palm
18 Gauge HPPE/Steel Knit
Color Coded Thumb Saddle Reinforcement
RATING AND SPECS
EN 388 RATING4X42C
ANSI CUT RATING A3
ANSI CUT GRAMS 1469g
ANSI PUNCTURE RATING 4
PALM MATERIAL Foam Nitrile
GRIP RATING Dry 5/5 &bull Wet 5/5 &bull Oily 4/5
Qty:
Part #:463245
- COMMAND&trade A2 PU (12 PACK)
Polyurethane Command&trade Touchscreen Coated Palm
18 Gauge HPPE/Steel Knit
Color Coded Thumb Saddle Reinforcement
Packaged for Vending
RATING AND SPECS
EN 388 RATING3X42C
ANSI CUT RATING A2
ANSI CUT GRAMS753g
ANSI PUNCTURE RATING4
PALM MATERIALPolyurethane
GRIP RATING Dry 5/5 &bull Wet 5/5 &bull Oily 5/5
Qty:
Part #:463255
-
Foam Nitrile Command&trade Touchscreen Coated Palm
18 Gauge HPPE/Steel Knit
Color Coded Thumb Saddle Reinforcement
Packaged for Vending
RATING AND SPECS
EN 388 RATING4X42C
ANSI CUT RATING A3
ANSI CUT GRAMS 1469g
ANSI PUNCTURE RATING 4
PALM MATERIAL Foam Nitrile
GRIP RATING Dry 5/5 &bull Wet 5/5 &bull Oily 4/5
Qty:
Displaying: 1 - 19 of 19 Matching Items